Ali, H. M. (2021). Analysis of heat pipe-aided graphene-oxide based nanoparticle-enhanced phase change material heat sink for passive cooling of electronic components. Journal of Thermal Analysis and Calorimetry 146, 277–286.##
Arshad, W. and H. M. Ali (2017). Experimental investigation of heat transfer and pressure drop in a straight minichannel heat sink using TiO2 nanofluid. International Journal of Heat and Mass Transfer 110, 248-256.##
Brdlik, P. M. and V. K. Savin (1965). Heat Transfer Between An Axisymmetric Jet And A Plate Normal To The Flow. Journal of Engineering Physics 8, 91-98.##
Choo, K., T. Y. Kang and S. J. Kim (2012). The effect of inclination on impinging jets at small nozzle-to-plate spacing. International Journal of Heat and Mass Transfer 55, 3327-3334.##
Demircan, T. (2019). Numerical analysis of cooling an electronic circuit component with cross flow and jet combination. Journal of Mechanics 35 (3), 395-404.##
Demircan, T. and H. Turkoglu (2010). The Numerical Analysis of Oscillating Rectangular Impinging Jets. Numerical Heat Transfer, Part A: Applications 58(2), 146-161.##
Ghaneifar, M., A. Raisi, H. M. Ali and P. Talebizadehsardari (2021). Mixed convection heat transfer of AL2O3 nanofluid in a horizontal channel subjected with two heat sources. Journal of Thermal Analysis and Calorimetry 143, 2761–2774.##
Guoneng, L., X. Zhihua, Z. Youqu, G. Wenwen and D. Cong (2016). Experimental study on convective heat transfer from a rectangular flat plate by multiple impinging jets in laminar cross flows. International Journal of Thermal Sciences 108, 123-131.##
Guoneng, L., Z. Youqu, H. Guilin and Z. Zhiguo (2014). Convective Heat Transfer Enhancement of a Rectangular Flat Plate by an Impinging Jet in Cross Flow. Chinese Journal of Chemical Engineering 22(5), 489-495.##
Hadipour, A. and M. R. Zargarabadi (2018). Heat transfer and flow characteristics of impinging jet on a concave surface at small nozzle to surface distances. Applied Thermal Engineering 138, 534-541.##
Hatami, M., F. B. Tehrani, A. Abouata and A. M. Ahmar (2018). Investigation of geometry and dimensionless parameters effects on the flow field and heat transfer of impingement synthetic jets. International Journal of Thermal Sciences 127, 41-52.##
Incropera, F. P., D. P. Dewit, T. L. Bergman and A. S. Lavine (2007). Fundamentals of Heat and Mass Transfer (Sixth Edition). John Wiley&Sons, Indiana, 447-487.##
Ingole, S. B. and K. K. Sundaram (2016). Experimental average Nusselt number characteristics with inclined non-confined jet impingement of air for cooling application. Experimental Thermal and Fluid Science 77, 124-131.##
Jing, Q., D. Zhang and Y. Xie (2018). Numerical investigations of impingement cooling performance on flat and non-flat targets with dimple/protrusion and triangular rib. International Journal of Heat and Mass Transfer 126, 169-190.##
Khan, A., F. Hadi, N. Akram, M. A. Bashir, H. M. Ali, M. M. Janjua, A. Hussain, R. A. Pasha, A. B. Janjua and F. Farukh (2022). Review of micro and mini channels, porous heat sinks with hydrophobic surfaces for single phase fluid flow. Journal of the Taiwan Institute of Chemical Engineers 132, 104186.##
Kilic, M. and H. M. Ali (2019). Numerical investigation of combined effect of nanofluids and multiple impinging jets on heat transfer. Thermal Science 23 (5B), 3165-3173.##
Konecni, S. (1990). Flow Measurements And Heat Transfer Studies Of İmpinging Jets On Simulated Electronic Packages. Master's Thesis, Texas University, Arlington.##
Köseoğlu, M. F. (2007). Experimental and Numerical Investigation of Electronics Equipment Cooling with Impinging Jets. Ph. D. Thesis, Gazi University Institute of Science and Technology, Ankara.##
Kuraan, A. M., S. I. Moldovan and K. Choo (2017). Heat transfer and hydrodynamics of free water jet impingement at low nozzle-to-plate spacings. International Journal of Heat and Mass Transfer 108, 2211-2216.##
Larraona, G. S., A. Rivas, R. Antón, J. C. Ramos, I. Pastor and B. Moshfegh (2013). Computational parametric study of an impinging jet in a cross-flow configuration for electronics cooling applications. Applied Thermal Engineering 52, 428-438.##
Ma, C. F. and A. E. Bergles (1983). Boiling Jet Impingement Cooling of Simulated Microelectronic Chips. Heat Transfer in Electronic Equipment HTD 28, 5-12.##
Maghrabie, H. M., M. Attalla, H. E. Fawaz and M. Khalil (2017). Numerical investigation of heat transfer and pressure drop of in-line array of heated obstacles cooled by jet impingement in cross-flow. Alexandria Engineering Journal 56, 285-296.##
Masip, Y., A. Campo and S. M. Nuñez (2020). Experimental analysis of the thermal performance on electronic cooling by a combination of cross-flow and an impinging air jet. Applied Thermal Engineering 167, 114779.##
Masip, Y., A. Rivas, G. S. Larraona, R. Anton, J. C. Ramos and B. Moshfegh (2012). Experimental study of the turbulent flow around a single wall-mounted cube exposed to a cross-flow and an impinging jet. International Journal of Heat and Fluid Flow 38, 50-71.##
Mergen, S. (2014). Numerical investigation of cooling of an electronic component with crossflow and impinging jet. Master's Thesis, Gazi University Institute of Science and Technology, Ankara.##
Mohammadshahi, S., H. Samsam-Khayani, T. Cai, M. Nili-Ahmadabadi and K. C. Kim (2021). Experimental study on flow characteristics and heat transfer of an oscillating jet in a cross flow. International Journal of Heat and Mass Transfer 173, 121208.##
Obot, K. N. (1975). An Apparatus For Study Of The Effect Of Suction On Heat Transfer For İmpinging Round Jets. Master's Thesis, McGill University, Montreal.##
Örs, E. (2017). Numerical investigation of cooling of an electronic component with crossflow and impinging jet. Master's Thesis, Gazi University Institute of Science and Technology, Ankara.##
Ravanji, A. and M. R. Zargarabadi (2020). Effects of elliptical pin-fins on heat transfer characteristics of a single impinging jet on a concave surface. International Journal of Heat and Mass Transfer 152, 119532.##
Saleha, N., N. Fadela and A. Abbes (2015). Improving cooling effectiveness by use chamfers on the top of electronic components. Microelectronics Reliability 55, 1067-1076.##
San, J. Y. and J. J. Chen (2014). Effects of jet-to-jet spacing and jet height on heat transfer characteristics of an impinging jet array. International Journal of Heat and Mass Transfer 71, 8-17.##
Selimefendigil, F. and H. F. Öztop (2014). Pulsating nanofluids jet impingement cooling of a heated horizontal surface. International Journal of Heat and Mass Transfer 69, 54-65.##
Sun, B., Y. Qu and D. Yang (2016). Heat transfer of Single Impinging Jet with Cu Nanofluids. Applied Thermal Engineering 102, 701-707.##
Wang, C., L. Luo, L. Wang and B. Sundén (2016). Effects of vortex generators on the jet impingement heat transfer at different cross-flow Reynolds numbers. International Journal of Heat and Mass Transfer 96, 278-286.##
Wang, C., L. Wang and B. Sundén (2015). A novel control of jet impingement heat transfer in cross-flow by a vortex generator pair. International Journal of Heat and Mass Transfer 88, 82–90.##
Wang, C., Z. Wang, L. Wang, L. Luo and B. Sundén (2019). Experimental study of fluid flow and heat transfer of jet impingement in cross-flow with a vortex generator pair. International Journal of Heat and Mass Transfer 135, 935–949.##
Wongchareea, K., V. Chuwattanakul and S. Eiamsa-ard (2017). Influence of CuO/water nanofluid concentration and swirling flow on jet impingement cooling. International Communications in Heat and Mass Transfer 88, 277-283.##
Xiao, Y., H. Tang, D. Liang and J. Zhang (2011). Numerical study of hydrodynamics of multiple tandem jets in cross flow. Journal of Hydrodynamics, Ser. B 23 (6), 806-813.##
Yu, P., K. Zhu, Q. Shi, N. I. Yuan and J. Ding (2017). Transient heat transfer characteristics of small jet impingement on high-temperature flat plate. International Journal of Heat and Mass Transfer 114, 981-991.##
Zhong, L., C. Zhou, Z. Sun and S. Chen (2019). Heat transfer mechanisms of inclined jets in cross flow with different holes. International Journal of Heat and Mass Transfer 131, 664-674.##
Zhu, K., P. Yu, N. Yuan and J. Ding (2018). Transient heat transfer characteristics of array-jet impingement on high-temperature flat plate at low jet-to-plate distances. International Journal of Heat and Mass Transfer 127, 413-425.##
Zuckerman, N. and N. Lior (2006). Jet impingement heat transfer: Physics, correlations,
and numerical modeling. Advances in Heat Transfer 39, 565-631.##
)
