Numerical Study of the Effect of a Power-law Fluid Flow Structures on Levels of Mixing in a Taylor Couette Configuration

Document Type : Regular Article

Authors

USTHB – Faculty of Mechanical and Process Engineering (FGMGP), Laboratory of Multiphase Transport and Porous Media (LTPMP), B.P.32, El Alia Bab Ezzouar 16111, Algiers, Algeria

Abstract

This work is a numerical study on the effects of the flow structures of the power-law fluid between two concentric cylinders with an upward laminar axial flow on levels of mixing and mean residence time through the Taylor Couette system. The cylindrical annular duct presents a radius ratio of 0.5 and an aspect ratio of 8. The inner cylinder is rotating while the outer one is kept at rest. The residence time distributions (R.T.D.) method and the mean residence time (Tm) are used to determine the number of tanks in series and the dispersion coefficient to evaluate levels of mixing. To this end, a pulsed input injection of a tracer is computing at the outlet of the annulus. As a main objective of this study, is to analyze the effect of the flow structure of a power-law fluid between two concentric cylinders on the mixing level and mean residence time in a Taylor Couette system. The novelty of our work is the use of power-law fluids as particles-carrying fluids. Several parameters, such as the axial Reynolds number (Re), the Taylor number (Ta), and the power-law index behavior (n), are used to show their impact on levels of mixing. It is shown that when n increases, the number of stirred tanks in series N increases for pseudoplastic fluids (n<1), indicating low levels of mixing while the parameter (N) decreases for dilatants fluids (n>1), revealing high levels of mixing. The increase of the power-law index in the range of 0.6<n<1 decreases the dispersion coefficient, indicating the non-ideal mixing in the duct. In addition, for further increase of the power-law index in the range of n>1 increases the dispersion coefficient points to the well-mixing.

Keywords

Main Subjects


Aparicio-Mauricioa, G., F. A. Rodrígueza, J. H. Joep Pijpersb, M. R. Cruz-Díaza and E. P. Rivero (2020). CFD modeling of residence time distribution and experimental validation in a redox flow battery using free and porous flow. Journal of Energy Storage 29, 101337##
Baleo, J. N. and P. Cloirec (2000). Numerical simulation of the spatial distribution of mean residence time in complex flows through porous media. Progress of Theoretical Physics Supplement 138(690-695).##
Bartak, M. I. Beausoleil-Morrison, J. A. Clarke, J. Denev, F. Drkal, M. Lain, I. A. Macdonald, A. Melikov, Z. Popiolek and P. Stankov (2002). Integrating CFD and building simulation. Build Environ 37 (8-9), 865-871.##
Campero, R. and R. Vigil (1997). Axial dispersion during low Reynolds number Taylor-Couette flow: intra vortex mixing effect. Chemical Engineering Journal 52(19) 3305-3310.##
Chanteloup, V. and P. S. Mirade (2009). Computational fluid dynamics (CFD) modeling of local mean age of air distribution in forced-ventilation food plants. Journal of Food Engineering 90(1), 90-103.##
Danckwerts, P. V. (1958). The effect of incomplete mixing on homogeneous reactions. Chemical Engineering Science 8(1–2), 93-102.##
Desmet, G., H. Verelst and G. Baron (1996). Local and global dispersion effect in Couette-Taylor flow-i. description and modeling of the dispersion effects. Chemical Engineering Journal 51(8),1299-1309.##
Devi, M. and U.Gupta (2022). Stability analysis of binary casson nanofluid convection with viscosity and conductivity variations using darcy–brinkman model. ASME Journal of Heat and mass Transfer 144(12), 121201.##
Devi, M., J. Sharma and U. Gupta (2022). Effect of internal heat source on Darcy-Brinkman convection in a non-Newtonian Casson nanofluid layer. Journal of Porous Media 25(4), 17-35.##
Enkoida, Y., K. Nakata and A. Suzuki (1989). Axial turbulent diffusion in fluid between rotating coaxial cylinders. AIChE Journal 35(7), 1211-1214.##
Guihard, I., F. Coeuret, L. Legrand, T. Fahidy and Z. Gu (1989). Circumferential mixing in the taylor-couette reactor. Chemical Engineering Progress Symposium Series 112, 105-117.##
Guo, X. Y. Fan and L. Luo (2018). Residence time distribution on flow characterization of multichannel systems: Modeling and experimentation. Experimental Thermal and Fluid Science 99, 407-419.##
Gyürkes, M. L. Madarasz, P. Zahonyi, A. Kote, B. Nagy, H. Pataki, Z. Kristof, N. A. Domokos and A. Farkas (2022). Soft sensor for content prediction in an integrated continuous pharmaceutical formulation line based on the residence time distribution of unit operations. International Journal of Pharmaceutics 624. 121950.##
Haicheng, L., J. Wang, Z. Shu, G. Qian, X. Duan, Z. Yang, X. Zhou and J. Zhang (2022). Residence time distribution and heat/mass transfer performance of a millimeter scale butterfly-shaped reactor. Chinese Chemical Latters S1001-8417(22)00718-5.##
Hwang, J. Y. and K. S. Yang (2004). Numerical study of Taylor–Couette flow with an axial flow. Computers & Fluids 33, 97-118.##
Kataoka, K., H. Doi, T. Hongo and M. Futagawa (1975). Ideal plug-flow properties of Taylor vortex flow. Journal of Chemical Engineering of Japan 8(6), 472-476.##
Kataoka, K. and T. Takigawa (1981). Intermixing over cell boundary between Taylor vortices. AIChE Journal 27(3), 504-508.##
Kataoka, K., H. Doi and T. Komai (1977). Heat and mass transfer in Taylor vortex flow with constant axial flow-rate. International Journal of Heat Mass Transfer 20(1) 472-476.##
Kaur, J., U. Gupta and R. P. Sharma. (2022). Nonlinear stability analysis for the rheology of Oldroyd-B nanofluids embedded by Darcy–Brinkman porous media using a two-phase model. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.##
Kaur, J. and U. Gupta (2022, July). Nonlinear analysis for thermal convection in Oldroyd-B nanofluids with zero nanoparticle flux on the boundaries. Indian Journal of Physics Online First.##
Khali, S., R. Nebbali and K. Bouhadef (2017). Effect of a porous layer on Newtonian and power‑law fluids flows between rotating cylinders using lattice Boltzmann method. Journal of the Brazilian Society of Mechanical Sciences and Engineering##
Legentilhomme, P., L. Brujes and J. Legrand (1997). Distribution of staying times of liquid in a non-maintained liquid-solid edding flow: influence of the presence of solids. Chemical Engineering Journal 67(2) 83-96.##
Legrand, J., F. Coeuret and M. Billon (1983). Structure dynamique et transfert de matière liquide –paroi dans le cas de l'écoulement laminaire tourbillonnaire de Couette-Poiseuille. International Journal of Heat Mass Transfer 26(7), 1075-1085.##
Legrand, J. and F. Coeuret (1986). Circumferentional mixing in onephase and two-phase Taylor vortex flow. Chemical Engineering Science 41(1) 47-53.##
Liu, M. Y. (2011). Quantitative characterization of mixing in stirred tank reactors with mean age distribution. The Canadian Journal of Chemical Engineering 89(5), 1018-1028.##
Liu, M. and J. N. Tilton (2010). Spatial distributions of mean age and higher moments in steady continuous flows. AIChE Journal 56(10), 2561-2572.##
Madeira, L. M., A. Mendes and F. Magalhaes (2006). Taching laminar-flow reactors: from experimentation to CFD simulation. International Journal of Engineering Education 22(1), 188-196.##
Molki, M., K. N. Astill and E. Leal (1990). Convective heat-mass transfer in the entrance region of a concentric annulus having a rotating inner cylinder. International Journal of Heat and Fluid Flow (11), 2.##
Moore, C. and C. Cooney (1995). Axial dispersion in Taylor-Couette flow. AIChE Journal 41(3), 723-727.##
Nemri, M., S. Charton and E. Climent (2016). Mixing and axial dispersion in Taylor–Couette flows: The effect of the flow regime. Chemical Engineering Science 139,109-124.##
Ohmura, N., K. Kataoka, Y. Shibata and T. Makino (1997). Effective mass diffusion over cell boundaries in Taylor-Couette flow system. Chemical Engineering Journal 52(11), 52-1757.##
Pudjioni, P. and N. Tavare (1993). Residence time distribution analysis from a continuous Couette flow device around critical Taylor Number. Chemical Engineering Journal 48(2), 101-110.##
Russ, D. C. and R. E. Berson (2016). Mean age theory in multiphase systems. Chemical Engineering Science 141(17), 1-7.##
Shukla, S. and U. Gupta (2022). LTNE Effects on Triple-Diffusive Convection in Nanofluids, ASME Journal of Heat and Mass Transfer 144(9), 092501).##
Tam, W. and H. Swinney (1987). Mass transport in turbulent taylor couette flow. Physical Review A 164(3), 1374-1381.##
Theaker, N. (2017). A Comparison of Mean Age Theory and Residence Time Distributions in Mixed Systems. Electronic Theses and Dissertations, University of Louisville.##
Wang, R., Z. Wang, X. Bi, C. J. Lim and S. Sokhansanj (2022). Residence time distribution and solids mixing of sawdust in a horizontal pulsed fluidized bed. Powder Technology 397, 117006.##
Zhang, G. T., N. Wannenmacher, A. Haider and O. Levenspiel (1990). How to narrow the residence time distribution of fluids in laminar-flow in pipes. The Chemical Engineering Journal 45(1), 43-48.##
Zhou, J. G. (2011). Axisymmetric lattice Boltzmann method revised. Physical Review E 84, 036704.##
Zhu, X., R. Campero and D. Vigil (2000). Axial mass transport in liquid Taylor-Couette-Poiseuille flow. Chemical Engineering Science 55(21), 5079-5087.##