Numerical Simulations of Turbulent Gas-solid Flow in a Gradual Expansion

Document Type : Regular Article

Authors

1 Department of Mechanical and Mechatronics Engineering, Universidad Nacional de Colombia, sede Bogotá, Colombia

2 Department of Mechanical Engineering. Universidad Autónoma de Occidente, 760030 Cali, Colombia

Abstract

Modeling efforts on turbulent gas-solid flows have mainly focused on studying particle-laden flows in channels and pipes. Despite its significance for industrial applications, the study of gas-solid flows in sudden or gradual expansions is less common in the literature. This paper challenges current two-phase flow models to compute the dilute turbulent gas-solid flow in a vertically oriented 12° conical diffuser. The solids phase is modeled in two ways: the Two-Fluid Model approach that incorporates closure relations derived from the kinetic theory of granular flow, and the Euler-Lagrange particle tracking model with two-way coupling. In both cases, turbulence in the gas phase is estimated by the Reynolds stress model with additional modulation terms that account for the effect of the particles on the gas-phase turbulence. Simulation results are validated versus experimental benchmark data not only for gas axial velocity but also for streamwise and radial turbulence intensity, as comparison with such turbulent variables has not been detailed in previous studies. Nevertheless, due to the lack of experimental data for validation, profiles of solids axial velocity are only compared numerically. Contours of turbulence kinetic energy and granular temperature in the diffuser region reveal a high shear area responsible for the production of turbulence in both phases. Moreover, results obtained from the Euler-Lagrange model show an intense particle fluctuating velocity in the streamwise direction downstream of the diffuser.

Keywords

Main Subjects


Ansys (2022). Ansys Fluent Theory Guide, Release 2022-R2.
Benavides, A., & van Wachem, B. (2008). Numerical simulation and validation of dilute turbulent gas-particle flow with inelastic collisions and turbulence modulation. Powder Technology, 182(2), 294-306. https://doi.org/10.1016/j.powtec.2007.06.028
Benavides, A., & van Wachem, B. (2009). Eulerian-eulerian prediction of dilute turbulent gas-particle flow in a backward-facing step. International Journal of Heat and Fluid Flow, 30(3), 452-461. https://doi.org/10.1016/j.ijheatfluidflow.2009.02.012
Bohnet, M., & Triesch, O. (2003). Influence of particles on fluid turbulence in pipe and diffuser gas-solids flow. Chemie-Ingenieur-Technik, 75(7), 1254-1261. https://doi.org/10.1002/cite.200300050
Chou, Y. W., & Liao, C. C. (2023). Numerical simulation of the pneumatic conveying of dilute particulate flows in a diffuser using Euler-Euler approach. AIP Conference Proceedings, 2685. https://doi.org/10.1063/5.0112082
Crowe, C. T., Schwarzkopf, J. D., Sommerfeld, M., & Tsuji, Y. (2011). Multiphase flows with droplets and particles. 2nd ed., CRC Press.
De Souza, F. J., Silva, A. L., & Utzig, J. (2014). Four-way coupled simulations of the gas-particle flow in a diffuser. Powder Technology, 253, 496-508. https://doi.org/10.1016/j.powtec.2013.12.021
El-Askary, W. A., Ibrahim, K. A., El-Behery, S. M., Hamed, M. H., & Al-Agha, M. S. (2015). Performance of vertical diffusers carrying Gas-solid flow: Experimental and numerical studies. Powder Technology, 273, 19-32. https://doi.org/10.1016/j.powtec.2014.12.023
Johnson, P. C., & Jackson, R. (1987). Frictional-collisional constitutive relations for granular materials, with application to plane shearing. Journal of Fluid Mechanics, 176, 67-93. https://doi.org/10.1017/S0022112087000570
Kale, S. R., & Eaton, J. K. (1985). An experimental investigation of gas-particle flows through diffusers in the freeboard region of fluidized beds. International Journal of Multiphase Flow, 11(5), 659-674. https://doi.org/10.1016/0301-9322(85)90085-0
Laín, S., Ortíz, D., Ramírez, J. A., & Duque, C. A. (2023). Analysis and discussion of two-way coupling effects in particle-laden turbulent channel flow. Ingenieria e Investigacion, 43(1), e87275. https://doi.org/10.15446/ing.investig.87275
Laín, S., & Sommerfeld, M. (2007). A study of the pneumatic conveying of non-spherical particles in a turbulent horizontal channel flow. Brazilian Journal of Chemical Engineering, 24(4), 535-546. https://doi.org/10.1590/S0104-66322007000400007
Laín, S., & Sommerfeld, M. (2013). Characterisation of pneumatic conveying systems using the Euler/Lagrange approach. Powder Technology, 235, 764-782. https://doi.org/10.1016/j.powtec.2012.11.029
Laín, S., Sommerfeld, M., & Kussin, J. (2002). Experimental studies and modelling of four-way coupling in particle-laden horizontal channel flow. International Journal of Heat and Fluid Flow, 23(5), 647-656. https://doi.org/10.1016/S0142-727X(02)00160-1
LaMarche, C. Q., Morán, A. B., van Wachem, B., & Curtis, J. S. (2017). Two-fluid modeling of cratering in a particle bed by a subsonic turbulent jet. Powder Technology, 318, 68-82. https://doi.org/10.1016/j.powtec.2017.05.008
Li, T., Gel, A., Pannala, S., Shahnam, M., & Syamlal, M. (2014). CFD simulations of circulating fluidized bed risers, part I: Grid study. Powder Technology, 254, 170-180. https://doi.org/10.1016/j.powtec.2014.01.021
Lun, C. K. K., Savage, S. B., Jeffrey, D. J., & Chepurniy, N. (1984). Kinetic theories for granular flow: Inelastic particles in Couette flow and slightly inelastic particles in a general flowfield. Journal of Fluid Mechanics, 140, 223-256