Enhancement of Savonius Wind Turbine Performance Through Blade Optimization

Hazar, O.; Dirgenali, M.; Kaçar, K.; Elçi, S.

doi:10.47176/jafm.18.5.3177

Enhancement of Savonius Wind Turbine Performance Through Blade Optimization

Document Type : Regular Article

Authors

Izmir Institute of Technology, Izmir, Urla, 35430, Turkey

10.47176/jafm.18.5.3177

Abstract

The objective of this study is to create an innovative blade design that enhances the power efficiency of the Savonius rotors. This is achieved by optimizing the blade shape of the traditional Savonius rotor using the ANSYS Adjoint solver program. The results of the analysis revealed that the total pressure exerted on the optimized shape was 16 times greater than that of the traditional Savonius rotor. To compare performance metrics, the rotor with the optimized blade structure was numerically modeled alongside the traditional and Banesh-type Savonius rotors using the ANSYS Fluent program. The Dynamic Mesh 6DOF method is used in the model domain in order to simulate rotation of the rotor. The rotors were then analyzed in two different configurations: as a single-stage rotor with a phase angle of 0^o, and as a three-stage rotor with a phase angle of 60^o between each stage while keeping rotor height constant. The optimized blade rotor with 3 stages demonstrated superior performance with a power coefficient of 0.44, outperforming both the Banesh and traditional Savonius rotors, while also displaying power coefficient values 18.9% and 37.5% higher than the Banesh-type Savonius and traditional Savonius rotors, respectively.

Keywords

Main Subjects

Computational Fluid Dynamics

References

Al-Faruk, A., & Sharifian, A. (2016). Geometrical optimization of a swirling Savonius wind turbine using an open jet wind tunnel. Alexandria Engineering Journal, 55(3), 2055-2064. https://doi.org/10.1016/j.aej.2016.07.005

Al-Ghriybah, M., & Lagum, A. A. (2023). Enhancing the aerodynamic performance of the Savonius wind turbine by utilizing quarter elliptical supplementary blades. Flow, Turbulence and Combustion, 112(3), 491-508. https://doi.org/10.1007/s10494-023-00516-0

ANSYS Fluent User's Guide, )2019) R1a, Section on 'Ansys Fluent Adjoint Solver-based Optimization'.

ANSYS Fluent User's Guide, (2019) R1b, Section on 'Ansys Fluent Gradient-Based Optimization'.

ANSYS Inc. ANSYS Fluent Tutorial Guide R18; ANSYS Inc.: Canonsburg, PA, USA, )2018(.

Chen, T. Y., & Liou, L. R. (2011). Blockage corrections in wind tunnel tests of small horizontal-axis wind turbines. Experimental Thermal and Fluid Science, 35(3), 565-569. https://doi.org/10.1016/j.expthermflusci.2010.12.005

Elçi, Ş., Hazar, O., Bahadıroğlu, N., Karakaya, D., & Bor, A. (2023). Destratification of thermally stratified water columns by air diffusers. Journal of Hydro-Environment Research, 46, 44-59. https://doi.org/10.1016/j.jher.2022.12.001

Giovanni, S. (2019). Wind science and engineering: Origins, developments, fundamentals and advancements. Springer. ISBN 9783030188153. https://doi.org/10.1007/978-3-030-18815-3

Hayashi, T., Li, Y., & Hara, Y. (2005). Wind tunnel tests on a different phase three-stage Savonius rotor. JSME International Journal Series B: Fluids and Thermal Engineering, 48(1), 9-16. https://doi.org/https://doi.org/10.1299/jsmeb.48.9

IEA (2024), Renewables 2024, IEA, Paris https://www.iea.org/reports/renewables-2024, Licence: CC BY 4.0

IRENA (2019). Future of wind: Deployment, investment, technology, grid integration and socio-economic aspects (A Global Energy Transformation paper). International Renewable Energy Agency, Abu Dhabi. ISBN 978-92-9260-155-3.

Lajnef, M., Mosbahi, M., Chouaibi, Y., & Driss, Z. (2020). Performance improvement in a helical Savonius wind rotor. Arabian Journal for Science and Engineering, 45(9), 9305-9323. https://doi.org/10.1007/s13369-020-04770-6

Laws, P., Saini, J., Kumar, A., & Mitra, S. (2020). Improvement in Savonius wind turbines efficiency by modification of blade designs—A numerical study. Journal of Energy Resources Technology, 142(6), 061303. https://doi.org/10.1115/1.4045476

Saha, U. K., & Rajkumar, M. J. (2006). On the performance analysis of Savonius rotor with twisted blades. Renewable Energy, 31(11), 1776-1788. https://doi.org/10.1016/j.renene.2005.08.030

Saha, U. K., Thotla, S., & Maity, D. (2008). Optimum design configuration of Savonius rotor through wind tunnel experiments. Journal of Wind Engineering and Industrial Aerodynamics, 96(8–9), 1359-1375. https://doi.org/10.1016/j.jweia.2008.03.005

Sanusi, A., Soeparman, S., Wahyudi, S., & Yuliati, L. (2016). Experimental study of combined blade Savonius wind turbine. International Journal of Renewable Energy Research, 6(2). https://doi.org/10.20508/ijrer.v6i2.3455.g6826

Sharma, S., & Kumar, S. R. (2016). Performance improvement of Savonius rotor using multiple quarter blades – A CFD investigation. Energy Conversion and Management, 127, 43-54. https://doi.org/10.1016/j.enconman.2016.08.087