Air Entrainment in High Pressure Multihole Gasoline Direct Injection Sprays

Authors

1 Department of Mechanical Engineering, Capital University of Science and Technology Islamabad, Pakistan

2 Advanced System Engineering, Continental Automotive France, Toulouse, France

3 Laboratoire de Mécanique des Fluides et d’Acoustique, CNRS – Ecole Centrale de Lyon INSA Université Claude Bernard Lyon, Ecully, France

Abstract

Experimental and numerical investigation of multihole gasoline direct injection (GDI) sprays at high injection pressure and temperature are performed. The primary objective of this study is to analyse the role of gas entrainment and spray plume interactions on the global spray parameters like spray tip penetration, spray angles and atomization. Three-hole 90° spray cone angle and six-hole 60° spray cone angle injectors are used for current work to examine the effect of the geometry of the injector on the spray interactions. The numerical results from Reynolds Average Navier Stokes (RANS) simulations show a reasonable comparison to experiments. The simulations provide further insight to the gas entrainment process highlights the fact that a stagnation plane is formed inside the spray cone which basically governs the semi collapse of spray that in turn affects the spray direction and cone angle.

Keywords

Journal of Applied Fluid Mechanics
Volume 10, Issue 4
July 2017
Pages 1223-1234

Files

Cited by

Share

How to cite

Statistics