Al-Garni, A. Z., F. Saeed and A. M. Al-Garni (2008). Experimental and numerical investigation of 65 degree Delta and 65/40 degree double-delta wings. Journal of Aircraft 45(1), 71-76.##
Becker, M. and D. Sheffler (2016). Designing a high speed, stealthy, and payload-focused VTOL UAV. In IEEE Systems and Information Engineering Design Symposium (SIEDS), Charlottesville, VA, USA.##
Brown, M. and R. Vos (2018, January). Conceptual Design and Evaluation of Blended-Wing-Body Aircraft. In AIAA SciTech Forum, AIAA Aerospace Sciences Meeting, Kissimmee, Florida.##
Dommelen, V. J. and V. Roelof (2014). Conceptual design and analysis of blended-wing-body aircraft. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 228(13), 2452-2474.##
Footohi, P., A. Bouskela and S. Shkarayev (2019, January). Aerodynamic Design of Long-Range VTOL UAV. In AIAA Scitech Forum, San Diego, California.##
Hileman, J., Z. Spakovszky, M. Drela and M. Sargeant (2007, January). Airframe Design for Silent Aircraft. In 45th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada.##
Kashitani, M., Y. Suganuma, H. Date, S. Nakao, Y. Takita and Y. Yamaguchi (January, 2015) Experimental study on aerodynamic characteristics of blended-wing-body by a wake integration method. In 53rd AIAA Aerospace Sciences Meeting, Kissimmee, Florida.##
Kumar, P. and J. K. Prasad (2016). Mechanism of Side Force Generation and Its Alleviation over a Slender Body. Journal of Spacecraft & Rockets 53(1), 195-208.##
Kuntawala, N., J. Hicken and D. Zingg (2011, January). Preliminary aerodynamic shape optimization of a blended-wing-body aircraft configuration. In 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, Florida.##
Larkin, G. and G. Coates (2017). A design analysis of vertical stabilisers for Blended Wing Body aircraft. Aerospace Science and Technology 64, 237-252.##
Lehmkuehler, K., K. Wong and D. Verstraete (2012, September). Design and test of a UAV blended wing body configuration. In Proceedings of the 28th Congress of the International Council of the Aeronautical Sciences, ICAS.##
Liebeck, R. H. (2003, July). Blended Wing Body Design Challenges. In AIAA/ICAS International Air and Space Symposium and Exposition: The Next 100 Y, Dayton, Ohio.##
Liebeck, R. H. (2004). Design of the Blended Wing Body Subsonic Transport. Journal of Aircraft 41(1), 10-25.##
Lyu, Z. and J. R. Martins (2013a). RANS-based aerodynamic shape optimization of a blended-wing-body aircraft. In 21st AIAA Computational Fluid Dynamics Conference, San Diego.##
Lyu, Z. and J. R. Martins (2013b, January). Aerodynamic shape optimization of a blended-wing-body aircraft. In 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Grapevine (Dallas/Ft. Worth Region), Texas.##
Maltby, R. L. (1962, April). Flow Visualization in Wind Tunnels Using Indicators. Advisory Group for Aeronautical Research and Development Paris (France).##
Midhun, M. V., P. Mondal, P. K. Karn and P. Kumar (2019, August). Numerical and Experimental Investigation of Blended Wing Body Configuration. In 21st Annual CFD Symposium, Bangalore.##
Naeini, H. K., M. Nili-Ahmadabadi and K. C. Kim (2019). An experimental study on the effect of a novel nature-inspired 3D-serrated leading edge on the aerodynamic performance of a double delta wing in the transitional flow regime. Journal of Mechanical Science and Technology 33(12), 5913-5921.##
Naeini, H. K., M. Nili-Ahmadabadi, Y. S. Park and K. C. Kim (2021). Effect of nature-inspired needle-shaped vortex generators on the aerodynamic features of a double-delta wing. International Journal of Mechanical Sciences 202, 106502.##
Panagiotou, P. and K. Yakinthos (2017, June). Parametric aerodynamic study of Blended-Wing-Body platforms at low subsonic speeds for UAV applications. In AIAA AVIATION Forum, 35th AIAA Applied Aerodynamics Conference, Denver, Colorado.##
Panagiotou, P., S. Fotiadis-Karras and K. Yakinthos (2018). Conceptual design of a blended wing body MALE UAV. Aerospace Science and Technology 73, 32-47.##
Qin, N., A. Vavalle, A. L. Moigne, M. Laban, K. Hackett and P. Weinerfelt (2002, September). Aerodynamic studies for blended wing body aircraft. In 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, Georgia.##
Qin, N., A.Vavalle, A. L. Moigne, M. Laban, K. Hackett and P. Weinerfelt (2004). Aerodynamic considerations of blended wing body aircraft. Progress in Aerospace Sciences 40, 321-343.##
Rodzewicz, M., Z. Goraj and A. Tomaszewski (2018). Design and testing of three tailless unmanned aerial vehicle configurations built for surveillance in Antarctic environment. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 232(14), 2598-2614.##
Siouris, S. and N. Qin (2007). Study of the Effects of Wing Sweep on the Aerodynamic Performance of a Blended Wing Body Aircraft. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 221(1), 47-55.##
Thompson, D., J. Feys, M. Filewich, S. Abdel-Magid, D. Dalli and F. Goto (2011, January). The design and construction of a blended wing body UAV. In 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, Florida.##
Yamada, T., M. Taguchi, N. T. Duong, M. Kashitani, K. Kusunose and Y. Takita (2019). Wake Measurements on Blended Wing Body with Gurney Flaps in Low Speed Flows. In AIAA Scitech 2019 Forum, San Diego, California.##
Zeng, C., R. Abnous and S. Chowdhury (2017). Aerodynamic modeling and optimization of a blended-wing-body transitioning uav. In 18th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Denver, Colorado.##
)