Numerical Study on Aerodynamic Characteristics of H-Darrieus Wind Turbine with Blunt Trailing-edge Airfoil

Document Type : Regular Article

Authors

School of Energy and Power Engineering, University of Shanghai for Science and Technology, Shanghai, 200093, PR China

10.47176/jafm.18.4.3019

Abstract

The present study numerically examines the aerodynamic performance of an H-type vertical axis wind turbine (VAWT) utilizing airfoils with blunt trailing edges (BTE). A comprehensive series of numerical analysis was conducted to assess the impact of BTE airfoil design variables, including trailing-edge thickness and baseline configuration, on the power generation capabilities of the H-type VAWT. The results indicate that an increase in trailing edge thickness correlates with a higher power coefficient at low tip speed ratios (TSRs). When the trailing edge thickness is 3% of the airfoil’s chord length, the power coefficient of the vertical axis wind turbine (VAWT) at low tip speed ratios can increase by up to 33.2% compared to the original wind turbine. Additionally, the maximum power efficiency can be improved by 2.94%. Furthermore, the BTE airfoil design, which is achieved by rotating the airfoil’s upper and lower surfaces around the leading edge, can result in a more favorable BTE airfoil configuration with respect to its aerodynamic characteristics. The current study reveals that the BTE airfoils present significant potential for urban wind energy utilization, as the reduced operational velocities of BTE airfoils lead to lower noise emissions and heightened safety measures for VAWTs, rendering them an appropriate choice for integration into urban settings.

Keywords

Main Subjects


Baker, J. P., Mayda, E. A., & Dam, C. P. V. (2006). Experimental analysis of thick blunt trailing-edge wind turbine airfoils. Journal of Solar Energy Engineering, (4), 128. https://doi.org/10.1115/1.2346701
Bianchini, A., Balduzzi, F., Ferrari, L., Ferrara, G., & Maleci, R. (2016). Critical issues in the CFD simulation of Darrieus wind turbines. Renewable Energy, 85, 419-435. https://doi.org/10.1016/j.renene.2015.06.048
Chao, D. D., & Dam, C. P. V. (2007). Computational aerodynamic analysis of a blunt trailing-edge airfoil modification to the NREL phase VI rotor. Wind Energy, 10(6), 529-550. https://doi.org/10.1002/we.239
Chegini, S., Asadbeigi, M., Ghafoorian, F., & Mehrpooya, M. (2023). An investigation into the self-starting of darrieus-savonius hybrid wind turbine and performance enhancement through innovative deflectors: A CFD approach. Ocean Engineering. https://doi.org/10.1016/j.oceaneng.2023.115910
Deng, L., Qiao, Z., & Yang, X. (2012). Aerodynamics performance computational of trailing-edge-blunting methods of flatback airfoil for large wind turbine based on rans equation. Acta Energiae Solaris Sinica, 33(4), 545-551. https://doi.org/10.3969/j.issn.0254-0096.2012.04.004
Guo, Y., Li, X., Sun, L., Gao, Y., Gao, Z., & Chen, L. (2019). Aerodynamic analysis of a step adjustment method for blade pitch of a VAWT. Journal of Wind Engineering and Industrial Aerodynamics, 188, 90-101. https://doi.org/10.1016/j.jweia.2019.02.023
Huang, H., Nong, Z., Li, G., & Li, J. (2023). Research and optimization of a built-in entity vertical axis wind turbine by variable pitch strategy. Journal of Building Engineering. https://doi.org/10.1016/j.jobe.2022.105810
Jain, S., & Saha, U. K. (2020). On the influence of blade thickness-to-chord ratio on dynamic stall phenomenon in H-type Darrieus wind rotors. Energy Conversion and Management, 218, 113024. https://doi.org/10.1016/j.enconman.2020.113024
Kumar, K. R., & Selvaraj, M. (2023). Novel deep learning model for predicting wind velocity and power estimation in advanced INVELOX wind turbines. Journal of Applied Fluid Mechanics. https://doi.org/10.47176/jafm,16.06.1637
Kumar, P. M., Kulkarni, R., Srikanth, N., & Lim, T. C. (2017). Performance assessment of darrieus turbine with modified trailing edge airfoil for low wind speeds. Smart Gird and Renewable Energy, 8(12), 425-439. https://doi.org/10.4236/sgre.2017.812028 
Larose, G. L., & D’Auteuil, A. (2008). Effect of local air compressibility on the aerodynamics of rectangular prisms at Mach number below 0.3. BBAA VI International Colloquium on: Bluff Bodies Aerodynamics & Applications. Milano, Italy, July,
Law, S. P. G., G. M. (1987). Wind tunnel evaluation of a truncated NACA 64-621 airfoil for wind turbine applications. Final Report Ohio State Univ Columbus. https://doi.org/10.2172/6443460
Mayda, E. A., Van Dam, C. P., Chao, D. D., & Berg, D. E. (2008). Flatback airfoil wind tunnel experiment. Airfoils, 151-162. http://doi.org/10.2172/933221
Raciti Castelli, M., Ardizzon, G., Battisti, L., Benini, E., & Pavesi, G. (2010). Modeling strategy and numerical validation for a darrieus vertical axis micro-wind turbine. ASME 2010 International Mechanical Engineering Congress and Exposition. https://doi.org/10.1115/imece2010-39548
Sayadi, H., & Shateri, A. R. (2013). Numerical simulation of turbulent flow around an airfoil with blunt trailing edge aerodynamic characteristics modification of this airfoil with base and aerodynamic cavity. International Journal of Advanced Design & Manufacturing Technology, 6(1), 61-67. https://www.semanticscholar.org/paper/Numerical-Simulation-of-Turbulent-Flow-around-an-Sayadi-Shateri/db89ad46d949025c2d8e06a13f5fd7a99be875af
Standish, K., & Dam, C. P. V. (2003). Aerodynamic analysis of blunt trailing edge airfoils. Journal of Solar Energy Engineering-transactions of The Asme, 125, 479-487. https://doi.org/10.1115/1.1629103
Xu, H. Y., Qiao, C. L., Huiqiang, Y., & Ye, Z. (2017). Active Circulation control on the blunt trailing edge wind turbine airfoil. AIAA Journal, 56, 554-570. https://doi.org/10.2514/1.J056223
Zhang, L., Yang, K., Zhao, X., & Xu, J. (2009). Aerodynamic Influence of different trailing-edge changing methods to the blunt brailing-edge aurfoil. Journal of Engineering Thermophysics. https://doi.org/:10.3321/j.issn:0253-231X.2009.05.014
Zhang, X., Li, Z., Yu, X., & Li, W. (2020). Aerodynamic performance of trailing-edge modification of H-Type VAWT Blade considering camber effect. International Journal of Aeronautical and Space Sciences, (3), 21. https://doi.org/10.1007/s42405-019-00241-x
Zhang, X., Wang, G., Zhang, M., Liu, H., & Li, W. (2017). Numerical study of the aerodynamic performance of blunt trailing-edge airfoil considering the sensitive roughness height. International Journal of Hydrogen Energy, 42(29), 18252-18262. https://doi.org/10.1016/j.ijhydene.2017.04.158
Zhang, X., & Wei, L. (2013). Effect of asymmetric blunt trailing-edge thickness on aerodynamic performance of wind turbine airfoils. Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 33(14), 107-113. https://doi.org/10.13334/j.0258-8013.pcsee.2013.14.014