Author Index

A

  • A. Aziz, A. R. Mathematical Modeling of the Flow of Diesel-CNG Fuel Mixture in a Pipe under the Influence of a Magnetic Field [Volume 10, Issue 1, 2017, Pages 389-396]
  • A. Aziz, A. R. Characteristics of CNG Bubbles in Diesel Flow under the Influence of the Magnetic Field [Volume 10, Issue 6, 2017, Pages 1649-1655]
  • Ababaei, A. Numerical Investigation of Forced Convection of Nanofluid Flow in Microchannels: Effect of Adding Micromixer [Volume 10, Issue 6, 2017, Pages 1759-1772]
  • Abas, A. Effects of Aspect Ratio in Moulded Packaging Considering Fluid/Structure Interaction: A CFD Modelling Approach [Volume 10, Issue 6, 2017, Pages 1799-1811]
  • Abbasian Arani, A. A. Numerical Investigation of Forced Convection of Nanofluid Flow in Microchannels: Effect of Adding Micromixer [Volume 10, Issue 6, 2017, Pages 1759-1772]
  • Abdelbaki, A. Analysis of Turbulent Natural Convection by an Elliptic Relaxation Model in Tall Vertical Cavities with Linear Temperatures on Sidewalls [Volume 10, Issue 3, 2017, Pages 847-859]
  • Abdollahi, D. Analyzing Free Vibration of a Cantilever Microbeam Submerged in Fluid with Free Boundary Approach [Volume 10, Issue 6, 2017, Pages 1593-1603]
  • Abdul Aziz, M. S. Effects of Aspect Ratio in Moulded Packaging Considering Fluid/Structure Interaction: A CFD Modelling Approach [Volume 10, Issue 6, 2017, Pages 1799-1811]
  • Abdullah, M. Oscillating Motion of an Oldroyd-B Fluid with Fractional Derivatives in a Circular Cylinder [Volume 10, Issue 5, 2017, Pages 1421-1426]
  • Abdullah, M. Z. Effects of Aspect Ratio in Moulded Packaging Considering Fluid/Structure Interaction: A CFD Modelling Approach [Volume 10, Issue 6, 2017, Pages 1799-1811]
  • Abdul Wahhab, H. A. Mathematical Modeling of the Flow of Diesel-CNG Fuel Mixture in a Pipe under the Influence of a Magnetic Field [Volume 10, Issue 1, 2017, Pages 389-396]
  • Abdul Wahhab, H. A. Characteristics of CNG Bubbles in Diesel Flow under the Influence of the Magnetic Field [Volume 10, Issue 6, 2017, Pages 1649-1655]
  • Abuhegazy, M. R. Prediction of Pressure Drop in Vertical Pneumatic Conveyors [Volume 10, Issue 2, 2017, Pages 519-527]
  • Adair, D. CFD Modelling of Flow Characteristics in Micro Shock Tubes [Volume 10, Issue 4, 2017, Pages 1061-1070]
  • Adibi, P. Study of Inertia and Compressibility Effects on the Density Wave Oscillations of Two-Phase Boiling Flows in Parallel Channels [Volume 10, Issue 6, 2017, Pages 1571-1581]
  • Afrand, M. Numerical Simulation of MHD Fluid Flow inside Constricted Channels using Lattice Boltzmann Method [Volume 10, Issue 6, 2017, Pages 1639-1648]
  • Aghaei, A. Numerical Investigation of Forced Convection of Nanofluid Flow in Microchannels: Effect of Adding Micromixer [Volume 10, Issue 6, 2017, Pages 1759-1772]
  • Agha Seyed Mirzabozorg, M. Numerical Study on the Effect of Single Shallow Circumferential Groove Casing Treatment on the Flow Field and the Stability of a Transonic Compressor [Volume 10, Issue 1, 2017, Pages 257-265]
  • Ağiralioğlu, N. Numerical Investigation of Temporal Variation of Density Flow and Parameters [Volume 10, Issue 1, 2017, Pages 81-94]
  • Ahmed, B. Numerical Analysis of Mixed Convective Peristaltic Flow in a Vertical Channel in Presence of Heat Generation without using Lubrication Theory [Volume 10, Issue 6, 2017, Pages 1813-1827]
  • Aizaz, A. Force Generation Mechanisms by an Insect Wing in an Idealized Hovering Motion [Volume 10, Issue 1, 2017, Pages 397-411]
  • Aizaz, A. Force Generation Mechanisms by an Insect Wing in Hovering Motion with Different Flipping Schedules [Volume 10, Issue 1, 2017, Pages 433-445]
  • Aizaz, A. Investigation of Corrugated Wing in Unsteady Motion [Volume 10, Issue 3, 2017, Pages 833-845]
  • Ak, E. S. Numerical and Experimental Investigation of Wiper System Performance at High Speeds [Volume 10, Issue 3, 2017, Pages 861-870]
  • Akbari, M. Numerical Comparison of the Parameters Influencing the Turbulent Flow using a T-shaped Spur Dike in a 90° Bend [Volume 10, Issue 1, 2017, Pages 231-241]
  • Akbari, M. Three-Dimensional Numerical Simulation of Deformation of a Single Drop under Uniform Electric Field [Volume 10, Issue 2, 2017, Pages 693-702]
  • Alhashash, A. Combined Solutal and Thermal Buoyancy Thermocapillary Convection in a Square Open Cavity [Volume 10, Issue 4, 2017, Pages 1113-1124]
  • Al-Kayiem, H. H. Mathematical Modeling of the Flow of Diesel-CNG Fuel Mixture in a Pipe under the Influence of a Magnetic Field [Volume 10, Issue 1, 2017, Pages 389-396]
  • Al-Kayiem, H. H. Characteristics of CNG Bubbles in Diesel Flow under the Influence of the Magnetic Field [Volume 10, Issue 6, 2017, Pages 1649-1655]
  • Alsaedi, A. Non-Uniform Heat Source/Sink and Thermal Radiation Effects on the Stretched Flow of Cylinder in a Thermally Stratified Medium [Volume 10, Issue 3, 2017, Pages 915-924]
  • Alsaif, K. Experimental Evaluation of the Critical Flutter Speed on Wings of Different Aspect Ratio [Volume 10, Issue 6, 2017, Pages 1509-1514]
  • Alshehhi, M. Flow Dynamics of a Plane Jet Impinging on a Slotted Plate: Large Eddy Simulation [Volume 10, Issue 4, 2017, Pages 1211-1222]
  • Ameur, H. Numerical Investigation of the Performance of Kenics Static Mixers for the Agitation of Shear Thinning Fluids [Volume 10, Issue 3, 2017, Pages 989-999]
  • Amiri, K. Effects of Upstream Flow Conditions on Runner Pressure Fluctuations [Volume 10, Issue 4, 2017, Pages 1045-1059]
  • Antonelli, D. Flow Simulations with Ultra-Low Reynolds Numbers over Rigid and Flexible Airfoils Subject to Heaving and Flapping Motions [Volume 10, Issue 2, 2017, Pages 749-762]
  • Aravinth, K. An Experimental Investigation to Study the Performance and Emission Characteristics of Chicken Fat Oil Fuelled DI Diesel Engine [Volume 10, (Special Issue), 2017, Pages 85-91]
  • Argüelles Díaz, K. M. Turbulence Structure around an Asymmetric High-Lift Airfoil for Different Incidence Angles [Volume 10, Issue 4, 2017, Pages 1013-1027]
  • Ariss, A. Numerical Investigation of the Performance of Kenics Static Mixers for the Agitation of Shear Thinning Fluids [Volume 10, Issue 3, 2017, Pages 989-999]
  • Arivazhagan, S. Heat Transfer Analysis of Flat Plate Subjected to Multi-Jet Air Impingement using Principal Component Analysis and Computational Technique [Volume 10, Issue 1, 2017, Pages 293-306]
  • Armou, S. Heat and Mass Transfer Enhancement in Absorption of Vapor in Laminar Liquid Film by Adding Nano-Particles [Volume 10, Issue 6, 2017, Pages 1711-1720]
  • Arunsandeep, G. Numerical Simulation for Freeze Drying of Skimmed Milk with Moving Sublimation Front using Tri-Diagonal Matrix Algorithm [Volume 10, Issue 3, 2017, Pages 813-818]
  • Asad, Sadia Non-Uniform Heat Source/Sink and Thermal Radiation Effects on the Stretched Flow of Cylinder in a Thermally Stratified Medium [Volume 10, Issue 3, 2017, Pages 915-924]
  • Asadollahi-Ghohieh, A. Numerical Investigation of Optimization of Injection Angle Effects on Fluidic Thrust Vectoring [Volume 10, Issue 1, 2017, Pages 157-167]
  • Asthana, R. Steady MHD Flow of Nano-Fluids over a Rotating Porous Disk in the Presence of Heat Generation/Absorption: a Numerical Study using PSO [Volume 10, Issue 3, 2017, Pages 871-879]
  • Awan, A. U. Oscillating Motion of an Oldroyd-B Fluid with Fractional Derivatives in a Circular Cylinder [Volume 10, Issue 5, 2017, Pages 1421-1426]
  • Ayder, E. Prediction of Cavitation Performance of Radial Flow Pumps [Volume 10, Issue 5, 2017, Pages 1397-1408]

B

  • Bahadir Olcay, A. Experimental and Numerical Investigation of a Longfin Inshore Squid’s Flow Characteristics [Volume 10, Issue 1, 2017, Pages 21-30]
  • Baheri, S. Heat Transfer Enhancement in a Stagnant Dielectric Liquid by the Up and Down Motion of Conductive Particles Induced by Coulomb Forces [Volume 10, Issue 1, 2017, Pages 169-182]
  • Baheri Islami, S. Enhancement of Mixing Performance of Non-Newtonian Fluids using Curving and Grooving of Microchannels [Volume 10, Issue 1, 2017, Pages 127-141]
  • Bajargaan, R. Similarity Solution for a Cylindrical Shock Wave in a Self-gravitating, Rotating Axisymmetric Dusty Gas with Heat Conduction and Radiation Heat Flux [Volume 10, Issue 1, 2017, Pages 329-341]
  • Bakhshan, Y. Study of Inertia and Compressibility Effects on the Density Wave Oscillations of Two-Phase Boiling Flows in Parallel Channels [Volume 10, Issue 6, 2017, Pages 1571-1581]
  • Balaji, G. Wind Tunnel Investigation of Downstream Wake Characteristics on Circular Cylinder with Various Taper Ratios [Volume 10, (Special Issue), 2017, Pages 69-77]
  • Bandyopadhyay, T. CFD Analysis for Non-Newtonian Pseudo Plastic Liquid Flow Through Small Diameter U-BEND [Volume 10, Issue 3, 2017, Pages 971-987]
  • Banerjee, S. Scattering of Fexural Gravity Waves by a Two-Dimensional Thin Plate [Volume 10, Issue 1, 2017, Pages 199-208]
  • Bangga, G. Dynamic Stall Prediction of a Pitching Airfoil using an Adjusted Two-Equation URANS Turbulence Model [Volume 10, Issue 1, 2017, Pages 1-10]
  • Baş, O. A Novel Alternating Cell Directions Implicit Method for the Solution of Incompressible Navier Stokes Equations on Unstructured Grids [Volume 10, Issue 6, 2017, Pages 1561-1570]
  • Bazazzadeh, M. Numerical Study on the Effect of Single Shallow Circumferential Groove Casing Treatment on the Flow Field and the Stability of a Transonic Compressor [Volume 10, Issue 1, 2017, Pages 257-265]
  • Begum, N. Thermal Marangoni Convection of Two-phase Dusty Fluid Flow along a Vertical Wavy Surface [Volume 10, Issue 2, 2017, Pages 509-517]
  • Behzadmehr, A. Heat Transfer Enhancement in a Stagnant Dielectric Liquid by the Up and Down Motion of Conductive Particles Induced by Coulomb Forces [Volume 10, Issue 1, 2017, Pages 169-182]
  • Bel Hadj Taher, A. Numerical Study of Unsteady Cavitating Flows around a Hydrofoil [Volume 10, Issue 1, 2017, Pages 447-458]
  • Bel Hadj Taher, A. Numerical Analysis of the Turbulent Flow Structure Induced by the Cavitation Shedding using LES [Volume 10, Issue 3, 2017, Pages 933-946]
  • Bellakhall, G. Numerical Analysis of the Turbulent Flow Structure Induced by the Cavitation Shedding using LES [Volume 10, Issue 3, 2017, Pages 933-946]
  • Bendani, K. Two-Dimensional Transient Modeling of Energy and Mass Transfer in Porous Building Components using COMSOL Multiphysics [Volume 10, Issue 1, 2017, Pages 319-328]
  • Ben Hassine, N. Modelisation and Simulation of Heat and Mass Transfers during Solar Drying of Sewage Sludge with Introduction of Real Climatic Conditions [Volume 10, Issue 2, 2017, Pages 651-659]
  • Ben Nasrallah, S. Experimental Investigation of Tip Vortex Meandering in the Near Wake of a Horizontal-Axis Wind Turbine [Volume 10, Issue 6, 2017, Pages 1679-1688]
  • Bennett, G. J. A Novel Method for Defining the Leeward Edge of the Planar Jet in Crossflow [Volume 10, Issue 5, 2017, Pages 1475-1486]
  • Bensouici, F. Z. Entropy Generation and Optimization of Laminar Forced Convection Air Cooling in a Horizontal Channel Containing Heated Sources [Volume 10, Issue 3, 2017, Pages 819-831]
  • Bensouici, M. Entropy Generation and Optimization of Laminar Forced Convection Air Cooling in a Horizontal Channel Containing Heated Sources [Volume 10, Issue 3, 2017, Pages 819-831]
  • Bertrand, J. Experimental Evaluation of the Critical Flutter Speed on Wings of Different Aspect Ratio [Volume 10, Issue 6, 2017, Pages 1509-1514]
  • Bikić, S. Optimization of Swirling Flow Energy Parameters on the Velocity Profile after Local Obstacle by Firefly Algorithm [Volume 10, Issue 2, 2017, Pages 479-489]
  • Bournot, P. Effect of the Number of Injectors on the Mixing Process in a Rapidly Mixed Type Tubular Flame Burner [Volume 10, Issue 2, 2017, Pages 595-603]
  • Bucur, D. M. Maximum Pressure Evaluation during Expulsion of Entrapped Air from Pressurized Pipelines [Volume 10, Issue 1, 2017, Pages 11-20]
  • Bulatović, R. R. Optimization of Swirling Flow Energy Parameters on the Velocity Profile after Local Obstacle by Firefly Algorithm [Volume 10, Issue 2, 2017, Pages 479-489]

C

  • Cadirci, S. Numerical and Experimental Investigation of Wiper System Performance at High Speeds [Volume 10, Issue 3, 2017, Pages 861-870]
  • Cai, W. Investigations of Combustion Performance in LPP Combustor [Volume 10, Issue 5, 2017, Pages 1271-1282]
  • Calchetti, G. Micro Gas Turbine Combustor Performances in CO2/O2 Oxidizer Atmosphere [Volume 10, Issue 2, 2017, Pages 581-593]
  • Calchetti, G. New-Concept Gas Turbine Burner Simulation in Moderate Intense Low-Oxygen Combustion Regime [Volume 10, Issue 6, 2017, Pages 1527-1536]
  • Cervantes, M. J. Maximum Pressure Evaluation during Expulsion of Entrapped Air from Pressurized Pipelines [Volume 10, Issue 1, 2017, Pages 11-20]
  • Cervantes, M. J. Computation of Developing Turbulent Flow through a Straight Asymmetric Diffuser with Moderate Adverse Pressure Gradient [Volume 10, Issue 4, 2017, Pages 1029-1043]
  • Cervantes, M. J. Effects of Upstream Flow Conditions on Runner Pressure Fluctuations [Volume 10, Issue 4, 2017, Pages 1045-1059]
  • Cete, A. R. A Novel Alternating Cell Directions Implicit Method for the Solution of Incompressible Navier Stokes Equations on Unstructured Grids [Volume 10, Issue 6, 2017, Pages 1561-1570]
  • Chamani, M. R. New Perspectives on the Laminar Boundary Layer Physics in a Polarized Pressure Field with Temperature Gradient: an Analytical Approximation to Blasius Equation [Volume 10, Issue 4, 2017, Pages 1071-1077]
  • Chandra, P. Numerical Analysis of Gas-Solid Behavior in a Cyclone Separator for Circulating Fluidized Bed System [Volume 10, Issue 4, 2017, Pages 1167-1176]
  • Chandramohan, P. Heat Transfer Analysis of Flat Plate Subjected to Multi-Jet Air Impingement using Principal Component Analysis and Computational Technique [Volume 10, Issue 1, 2017, Pages 293-306]
  • Chandramohan, V. P. Numerical Simulation for Freeze Drying of Skimmed Milk with Moving Sublimation Front using Tri-Diagonal Matrix Algorithm [Volume 10, Issue 3, 2017, Pages 813-818]
  • Chandrasekaran, M. Optimization of Abrasive Water Jet Cutting Parameter for AISI 316L Stainless Steel Sheet [Volume 10, (Special Issue), 2017, Pages 15-22]
  • Chatterjee, P. Numerical Analysis of Gas-Solid Behavior in a Cyclone Separator for Circulating Fluidized Bed System [Volume 10, Issue 4, 2017, Pages 1167-1176]
  • Chatterjee, P. Hydrodynamic Modelling of Coal-Biomass Mixture in a Bubbling Fluidized Bed Reactor [Volume 10, Issue 5, 2017, Pages 1355-1362]
  • Chen, A. L. Entropy Production Analysis for S-Characteristics of a Pump Turbine [Volume 10, Issue 6, 2017, Pages 1657-1668]
  • Chen, X. A Computational Study on the Performance Improvement of Low-Speed Axial Flow Fans with Microplates [Volume 10, Issue 6, 2017, Pages 1537-1546]
  • Chen, X. D. Aerodynamic Study of Two Opposing Moving Trains in a Tunnel Based on Different Nose Contours [Volume 10, Issue 5, 2017, Pages 1375-1386]
  • Chen, Z. W. Aerodynamic Study of Two Opposing Moving Trains in a Tunnel Based on Different Nose Contours [Volume 10, Issue 5, 2017, Pages 1375-1386]
  • Chesneau, X. Modelisation and Simulation of Heat and Mass Transfers during Solar Drying of Sewage Sludge with Introduction of Real Climatic Conditions [Volume 10, Issue 2, 2017, Pages 651-659]
  • Chouari, Y. Effect of the Number of Injectors on the Mixing Process in a Rapidly Mixed Type Tubular Flame Burner [Volume 10, Issue 2, 2017, Pages 595-603]
  • Concheiro, M. CFD Transient Simulation of a Breathing Cycle in an Oral-Nasal Extrathoracic Model [Volume 10, Issue 3, 2017, Pages 777-784]

D

  • Dahmouni, A. W. Experimental Investigation of Tip Vortex Meandering in the Near Wake of a Horizontal-Axis Wind Turbine [Volume 10, Issue 6, 2017, Pages 1679-1688]
  • Debnath, P. Numerical Investigation of Detonation Combustion Wave in Pulse Detonation Combustor with Ejector [Volume 10, Issue 2, 2017, Pages 725-733]
  • Debnath, S. CFD Analysis for Non-Newtonian Pseudo Plastic Liquid Flow Through Small Diameter U-BEND [Volume 10, Issue 3, 2017, Pages 971-987]
  • Debnath, S. On Dispersion in Oscillatory Annular Flow Driven Jointly by Pressure Pulsation and Wall Oscillation [Volume 10, Issue 5, 2017, Pages 1487-1500]
  • Deepakkumar, R. Cross Flow past Circular Cylinder with Waviness in Confining Walls near the Cylinder [Volume 10, Issue 1, 2017, Pages 183-197]
  • Deepu, M. Numerical Studies on Thrust Augmentation in High Area Ratio Rocket Nozzles by Secondary Injection [Volume 10, Issue 6, 2017, Pages 1605-1614]
  • Dewan, A. Analysis of Interrupted Rectangular Microchannel Heat Sink with High Aspect Ratio [Volume 10, Issue 1, 2017, Pages 117-126]
  • Dewan, A. Convective Heat Transfer Enhancement using Slot Jet Impingement on a Detached Rib Surface [Volume 10, Issue 6, 2017, Pages 1615-1627]
  • Deyranlou, A. Numerical Study on Fluid-Structure Interaction in a Patient-Specific Abdominal Aortic Aneurysm for Evaluating Wall Heterogeneity and Material Model Effects on its Rupture [Volume 10, Issue 6, 2017, Pages 1699-1709]
  • Di Cristo, C. A Strategy for Passive Control of Natural Roll-Waves in Power-Law Fluids through Inlet Boundary Conditions [Volume 10, Issue 2, 2017, Pages 667-680]
  • Di Nardo, A. Micro Gas Turbine Combustor Performances in CO2/O2 Oxidizer Atmosphere [Volume 10, Issue 2, 2017, Pages 581-593]
  • Di Nardo, A. New-Concept Gas Turbine Burner Simulation in Moderate Intense Low-Oxygen Combustion Regime [Volume 10, Issue 6, 2017, Pages 1527-1536]
  • Dizene, R. Reducing Noise Generated from a Wind Turbine Blade by Pitch Angle Control using CFD and Acoustic Analogy [Volume 10, Issue 4, 2017, Pages 1201-1209]
  • Dobrucali, E. URANS-Based Prediction of Vortex Induced Vibrations of Circular Cylinders [Volume 10, Issue 3, 2017, Pages 957-970]
  • Dong, S. Instability of MHD Flow in the Duct with Electrically Perfectly Conducting Walls [Volume 10, Issue 5, 2017, Pages 1293-1304]
  • Dorovskikh, R. S. Determination of the Modes and the Conditions of Ultrasonic Spraying Providing Specified Productivity and Dispersed Characteristics of the Aerosol [Volume 10, Issue 5, 2017, Pages 1409-1419]
  • Du, P. Flow Characterizations and Drag Reduction on the Hydrophobic Surface with a Full Covering Gas Film [Volume 10, Issue 2, 2017, Pages 491-498]
  • Dunca, G. Maximum Pressure Evaluation during Expulsion of Entrapped Air from Pressurized Pipelines [Volume 10, Issue 1, 2017, Pages 11-20]

E

  • Ebrahimi, R. Numerical Simulation of Highly Charged Droplets Dynamics with Primary Break-up in Electrospray at Sub Rayleigh Limit [Volume 10, Issue 2, 2017, Pages 541-550]
  • El-Behery, S. M. Prediction of Pressure Drop in Vertical Pneumatic Conveyors [Volume 10, Issue 2, 2017, Pages 519-527]
  • El Hammami, Y. Heat and Mass Transfer Enhancement in Absorption of Vapor in Laminar Liquid Film by Adding Nano-Particles [Volume 10, Issue 6, 2017, Pages 1711-1720]
  • El-Haroun, A. A. Prediction of Pressure Drop in Vertical Pneumatic Conveyors [Volume 10, Issue 2, 2017, Pages 519-527]
  • El Hattab, M. Heat and Mass Transfer Enhancement in Absorption of Vapor in Laminar Liquid Film by Adding Nano-Particles [Volume 10, Issue 6, 2017, Pages 1711-1720]
  • El Moutaouakil, L. Analysis of Turbulent Natural Convection by an Elliptic Relaxation Model in Tall Vertical Cavities with Linear Temperatures on Sidewalls [Volume 10, Issue 3, 2017, Pages 847-859]
  • Ennouri, M. Numerical Study of Unsteady Cavitating Flows around a Hydrofoil [Volume 10, Issue 1, 2017, Pages 447-458]
  • Ennouri, M. Numerical Analysis of the Turbulent Flow Structure Induced by the Cavitation Shedding using LES [Volume 10, Issue 3, 2017, Pages 933-946]
  • Esfahanian, V. A New Approach to Reduce Memory Consumption in Lattice Boltzmann Method on GPU [Volume 10, Issue 1, 2017, Pages 55-67]
  • Eskandari-Ghadi, M. Development of an Acoustic Metamaterials for Aero Acoustic Noise Control [Volume 10, Issue 2, 2017, Pages 569-579]
  • Eslami, G. Heat Transfer Enhancement in a Stagnant Dielectric Liquid by the Up and Down Motion of Conductive Particles Induced by Coulomb Forces [Volume 10, Issue 1, 2017, Pages 169-182]
  • Esmaeili, M. Numerical Simulation of MHD Fluid Flow inside Constricted Channels using Lattice Boltzmann Method [Volume 10, Issue 6, 2017, Pages 1639-1648]
  • Esmaeilzadeh, E. Heat Transfer Enhancement in a Stagnant Dielectric Liquid by the Up and Down Motion of Conductive Particles Induced by Coulomb Forces [Volume 10, Issue 1, 2017, Pages 169-182]
  • Esmaeilzadeh, E. A Finite Volume Study on the Effects of Electro-Hydro-Dynamic Fluid Acceleration on Airflow Around a Cylinder at Low Reynolds Numbers [Volume 10, Issue 3, 2017, Pages 889-897]

F

  • Fakhari, M. M. Experimental Investigation of Laminar Convection Heat Transfer of Al2O3-Ethylene Glycol-Water Nanofluid as a Coolant in a Car Radiator [Volume 10, Issue 1, 2017, Pages 209-219]
  • Farzaneh, M. Effect of Reverting Channels on Heat Transfer Performance of Microchannels with Different Geometries [Volume 10, Issue 1, 2017, Pages 41-53]
  • Feizi Chekab, M. A. Ferrofluid Appendages: Fluid Fins, a Numerical Investigation on the Feasibility of using Fluids as Shapeable Propulsive Appendages [Volume 10, Issue 2, 2017, Pages 615-623]
  • Feizi Chekab, M. A. Curvature Effects on the Electromagnetic Force, Efficiency, and Heat Transfer of a Weak Low Profile Magneto-Hydrodynamic Blanket Propulsion System [Volume 10, Issue 5, 2017, Pages 1261-1270]
  • Fellouah, H. Experimental Evaluation of the Critical Flutter Speed on Wings of Different Aspect Ratio [Volume 10, Issue 6, 2017, Pages 1509-1514]
  • Feng, C. J. Coupled Analysis of Unsteady Aerodynamics and Vehicle Motion of a Passenger Car in Crosswind Condition [Volume 10, Issue 2, 2017, Pages 625-637]
  • Feng, J. Q. A Computational Study of High-Speed Microdroplet Impact onto a Smooth Solid Surface [Volume 10, Issue 1, 2017, Pages 243-256]
  • Feng, J. Q. A Computational Study of Particle Deposition Patterns from a Circular Laminar Jet [Volume 10, Issue 4, 2017, Pages 1001-1012]
  • Fernández Oro, J. M. Turbulence Structure around an Asymmetric High-Lift Airfoil for Different Incidence Angles [Volume 10, Issue 4, 2017, Pages 1013-1027]
  • Ferrer, V. Influence of Smooth Constriction on Microstructure Evolution during Fluid Flow through a Tube [Volume 10, Issue 6, 2017, Pages 1583-1591]
  • Fırat, E. Experimental and Numerical Investigation of a Longfin Inshore Squid’s Flow Characteristics [Volume 10, Issue 1, 2017, Pages 21-30]
  • Forghany, F. Numerical Investigation of Optimization of Injection Angle Effects on Fluidic Thrust Vectoring [Volume 10, Issue 1, 2017, Pages 157-167]
  • Fu, X. Vorticity-Based Study of Apparent Mass of Body of Revolution [Volume 10, Issue 3, 2017, Pages 881-887]

G

  • Gangadharaiah, Y. H. Onset of Darcy–Benard Penetrative Convection in Porous Media [Volume 10, Issue 2, 2017, Pages 661-666]
  • Ganguli, S. Numerical Analysis of Gas-Solid Behavior in a Cyclone Separator for Circulating Fluidized Bed System [Volume 10, Issue 4, 2017, Pages 1167-1176]
  • Gao, G. Shape Optimization of a Kind of Earth Embankment Type Windbreak Wall along the Lanzhou-Xinjiang Railway [Volume 10, Issue 4, 2017, Pages 1189-1200]
  • Gao, G. Numerical Simulation with a DES Approach for a High-Speed Train Subjected to the Crosswind [Volume 10, Issue 5, 2017, Pages 1329-1342]
  • Gao, G. Study of Snow Accumulation on a High-Speed Train’s Bogies Based on the Discrete Phase Model [Volume 10, Issue 6, 2017, Pages 1729-1745]
  • Gao, Y. H. Dynamic Simulation in Guide Vane Opening Process of a Pump-Turbine in Pump Mode [Volume 10, Issue 5, 2017, Pages 1441-1449]
  • García-Sánchez, P. Heat Transfer Enhancement in a Stagnant Dielectric Liquid by the Up and Down Motion of Conductive Particles Induced by Coulomb Forces [Volume 10, Issue 1, 2017, Pages 169-182]
  • Gaskell, P. Free Surface Thin Film Flow of a Sisko’s Fluid over a Surface Topography [Volume 10, Issue 1, 2017, Pages 307-317]
  • Gedik, E. Experimental and Numerical Investigation on Laminar Pipe Flow of Magneto-Rheological Fluids under Applied External Magnetic Field [Volume 10, Issue 3, 2017, Pages 801-811]
  • Ghadimi, P. Asymmetric Water Entry of Twin Wedges with Different Deadrises, Heel Angles, and Wedge Separations using Finite Element Based Finite Volume Method and VOF [Volume 10, Issue 1, 2017, Pages 353-368]
  • Ghadimi, P. Ferrofluid Appendages: Fluid Fins, a Numerical Investigation on the Feasibility of using Fluids as Shapeable Propulsive Appendages [Volume 10, Issue 2, 2017, Pages 615-623]
  • Ghadimi, P. Curvature Effects on the Electromagnetic Force, Efficiency, and Heat Transfer of a Weak Low Profile Magneto-Hydrodynamic Blanket Propulsion System [Volume 10, Issue 5, 2017, Pages 1261-1270]
  • Ghadimi, P. Particle and Gas Flow Modeling of Wall-impinging Diesel Spray under Ultra-high Fuel Injection Pressures [Volume 10, Issue 5, 2017, Pages 1283-1291]
  • Ghaffar, A. N. Numerical, Experimental and Analytical Studies on Fluid Flow through a Marsh Funnel [Volume 10, Issue 6, 2017, Pages 1501-1507]
  • Ghaffarpasand, O. Massline Visualization of Double-Diffusive Natural Convection inside a Cavity Filled with Nanofluid Subjected to Heat Flux and Transverse Magnetic Field [Volume 10, Issue 5, 2017, Pages 1427-1440]
  • Gharibi, F. Lattice Boltzmann Simulation of Solid Particles Motion in a Three Dimensional Flow using Smoothed Profile Method [Volume 10, Issue 4, 2017, Pages 1091-1103]
  • Glavčić, Z. Optimization of Swirling Flow Energy Parameters on the Velocity Profile after Local Obstacle by Firefly Algorithm [Volume 10, Issue 2, 2017, Pages 479-489]
  • Gnanasundaram, N. Effect of Liquid Viscosity and Solid Inventory on Hydrodynamics in a Liquid - solid Circulating Fluidized Bed [Volume 10, Issue 1, 2017, Pages 267-274]
  • Gnaneswara Reddy, M. Effects of Thermal Radiation on MHD Peristaltic Motion of Walters-B Fluid with Heat Source and Slip Conditions [Volume 10, Issue 4, 2017, Pages 1105-1112]
  • Gokhan Gokcen, M. Experimental and Numerical Investigation of a Longfin Inshore Squid’s Flow Characteristics [Volume 10, Issue 1, 2017, Pages 21-30]
  • Golykh, R. N. Evaluation of Optimum Modes and Conditions of Cavitation and Acoustic Absorption Intensification for Increasing Efficiency of Gas Mixtures Separation [Volume 10, Issue 5, 2017, Pages 1235-1246]
  • Golykh, R. N. Determination of the Modes and the Conditions of Ultrasonic Spraying Providing Specified Productivity and Dispersed Characteristics of the Aerosol [Volume 10, Issue 5, 2017, Pages 1409-1419]
  • Gong, C. Measurement and Investigation on the Jet Interface Structure [Volume 10, Issue 6, 2017, Pages 1747-1758]
  • Gong, R. Z. Dynamic Simulation in Guide Vane Opening Process of a Pump-Turbine in Pump Mode [Volume 10, Issue 5, 2017, Pages 1441-1449]
  • Gong, R. Z. Entropy Production Analysis for S-Characteristics of a Pump Turbine [Volume 10, Issue 6, 2017, Pages 1657-1668]
  • Gorla, R. S. R. Thermal Marangoni Convection of Two-phase Dusty Fluid Flow along a Vertical Wavy Surface [Volume 10, Issue 2, 2017, Pages 509-517]
  • Gorokhovski, M. Air Entrainment in High Pressure Multihole Gasoline Direct Injection Sprays [Volume 10, Issue 4, 2017, Pages 1223-1234]
  • Gölcü, M. Effects of Blade Discharge Angle, Blade Number and Splitter Blade Length on Deep Well Pump Performance [Volume 10, Issue 2, 2017, Pages 529-540]
  • Grzelak, J. Length Scale of Free Stream Turbulence and Its Impact on Bypass Transition in a Boundary Layer [Volume 10, Issue 2, 2017, Pages 713-724]
  • Gu, Z. Q. Coupled Analysis of Unsteady Aerodynamics and Vehicle Motion of a Passenger Car in Crosswind Condition [Volume 10, Issue 2, 2017, Pages 625-637]
  • Gunawan, . Effect of Agar Jelly Coating in Rectangular Pipe to Flow Drag Reduction [Volume 10, Issue 4, 2017, Pages 1161-1166]
  • Gunes, H. Numerical and Experimental Investigation of Wiper System Performance at High Speeds [Volume 10, Issue 3, 2017, Pages 861-870]
  • Gupta, S. Steady MHD Flow of Nano-Fluids over a Rotating Porous Disk in the Presence of Heat Generation/Absorption: a Numerical Study using PSO [Volume 10, Issue 3, 2017, Pages 871-879]
  • Gupta, U. Modified Model for Binary Nanofluid Convection with Initial Constant Nanoparticle Volume Fraction [Volume 10, Issue 5, 2017, Pages 1387-1395]

H

  • Haider, B. A. Aerodynamically Efficient Rotor Design for Hovering Agricultural Unmanned Helicopter [Volume 10, Issue 5, 2017, Pages 1461-1474]
  • Halilovicc, A. Numerical, Experimental and Analytical Studies on Fluid Flow through a Marsh Funnel [Volume 10, Issue 6, 2017, Pages 1501-1507]
  • Hamdani, H. R. Force Generation Mechanisms by an Insect Wing in an Idealized Hovering Motion [Volume 10, Issue 1, 2017, Pages 397-411]
  • Hamdani, H. R. Force Generation Mechanisms by an Insect Wing in Hovering Motion with Different Flipping Schedules [Volume 10, Issue 1, 2017, Pages 433-445]
  • Hamdani, H. R. Investigation of Corrugated Wing in Unsteady Motion [Volume 10, Issue 3, 2017, Pages 833-845]
  • Hamid, A. H. Numerical Analysis of Mixed Convective Peristaltic Flow in a Vertical Channel in Presence of Heat Generation without using Lubrication Theory [Volume 10, Issue 6, 2017, Pages 1813-1827]
  • Hamzezade, M. Numerical Study on the Effect of Single Shallow Circumferential Groove Casing Treatment on the Flow Field and the Stability of a Transonic Compressor [Volume 10, Issue 1, 2017, Pages 257-265]
  • Han, L. Dynamic Simulation in Guide Vane Opening Process of a Pump-Turbine in Pump Mode [Volume 10, Issue 5, 2017, Pages 1441-1449]
  • Haq, E. U. Oscillating Motion of an Oldroyd-B Fluid with Fractional Derivatives in a Circular Cylinder [Volume 10, Issue 5, 2017, Pages 1421-1426]
  • Hayat, T. Non-Uniform Heat Source/Sink and Thermal Radiation Effects on the Stretched Flow of Cylinder in a Thermally Stratified Medium [Volume 10, Issue 3, 2017, Pages 915-924]
  • He, K. Numerical Simulation with a DES Approach for a High-Speed Train Subjected to the Crosswind [Volume 10, Issue 5, 2017, Pages 1329-1342]
  • He, K. Study of Snow Accumulation on a High-Speed Train’s Bogies Based on the Discrete Phase Model [Volume 10, Issue 6, 2017, Pages 1729-1745]
  • Hélie, J. Air Entrainment in High Pressure Multihole Gasoline Direct Injection Sprays [Volume 10, Issue 4, 2017, Pages 1223-1234]
  • Heperkan, H. Experimental and Numerical Investigation of a Longfin Inshore Squid’s Flow Characteristics [Volume 10, Issue 1, 2017, Pages 21-30]
  • Hokansson, U. Numerical, Experimental and Analytical Studies on Fluid Flow through a Marsh Funnel [Volume 10, Issue 6, 2017, Pages 1501-1507]
  • Hosien, M. A. Acoustic Detection of Cavitation Inception [Volume 10, Issue 1, 2017, Pages 31-40]
  • Hosien, M. A. Experimental and Theoretical Investigation on the Effect of Pumped Water Temperature on Cavitation Breakdown in Centrifugal Pumps [Volume 10, Issue 4, 2017, Pages 1079-1089]
  • Hossain, M. A. Thermal Marangoni Convection of Two-phase Dusty Fluid Flow along a Vertical Wavy Surface [Volume 10, Issue 2, 2017, Pages 509-517]
  • Hu, H. Flow Characterizations and Drag Reduction on the Hydrophobic Surface with a Full Covering Gas Film [Volume 10, Issue 2, 2017, Pages 491-498]
  • Hu, J. Synthetic Separation Control Using Vortex Generator and Slot Jet in a High Load Compressor Cascade [Volume 10, Issue 5, 2017, Pages 1305-1318]
  • Huang, D. Aerodynamic Design and Performance Assessment of a Centripetal-Flow Fan [Volume 10, Issue 5, 2017, Pages 1343-1353]
  • Huang, D. A Computational Study on the Performance Improvement of Low-Speed Axial Flow Fans with Microplates [Volume 10, Issue 6, 2017, Pages 1537-1546]
  • Huang, T. M. Coupled Analysis of Unsteady Aerodynamics and Vehicle Motion of a Passenger Car in Crosswind Condition [Volume 10, Issue 2, 2017, Pages 625-637]
  • Hussein, A. K. Numerical Analysis on the Two-Dimensional Unsteady Magnetohydrodynamic Compressible Flow through a Porous Medium [Volume 10, Issue 4, 2017, Pages 1153-1159]

I

  • Iervolino, M. A Strategy for Passive Control of Natural Roll-Waves in Power-Law Fluids through Inlet Boundary Conditions [Volume 10, Issue 2, 2017, Pages 667-680]
  • Ijaz, S. A Balloon Model Examination with Impulsion of Cu-Nanoparticles as Drug Agent through Stenosed Tapered Elastic Artery [Volume 10, Issue 6, 2017, Pages 1773-1783]
  • Ilieva, G. Mechanisms of Water Droplets Deposition on Turbine Blade Surfaces and Erosion Wear Effects [Volume 10, Issue 2, 2017, Pages 551-567]
  • Ishak, M. H. H. Effects of Aspect Ratio in Moulded Packaging Considering Fluid/Structure Interaction: A CFD Modelling Approach [Volume 10, Issue 6, 2017, Pages 1799-1811]
  • Ivaz, K. Analyzing Free Vibration of a Cantilever Microbeam Submerged in Fluid with Free Boundary Approach [Volume 10, Issue 6, 2017, Pages 1593-1603]

J

  • Jaeger, M. CFD Modelling of Flow Characteristics in Micro Shock Tubes [Volume 10, Issue 4, 2017, Pages 1061-1070]
  • Jafari, S. Lattice Boltzmann Simulation of Solid Particles Motion in a Three Dimensional Flow using Smoothed Profile Method [Volume 10, Issue 4, 2017, Pages 1091-1103]
  • Jahangardy, Y. Identification of Drag Force of the Underwater Vehicles [Volume 10, Issue 1, 2017, Pages 275-281]
  • Jahangirian, A. Flow Control of Transonic Airfoils using Optimum Suction and Injection Parameters [Volume 10, Issue 1, 2017, Pages 103-115]
  • Jahanshahi Javaran, E. Lattice Boltzmann Simulation of Solid Particles Motion in a Three Dimensional Flow using Smoothed Profile Method [Volume 10, Issue 4, 2017, Pages 1091-1103]
  • Jamali Ghahderijani, M. Numerical Simulation of MHD Fluid Flow inside Constricted Channels using Lattice Boltzmann Method [Volume 10, Issue 6, 2017, Pages 1639-1648]
  • Javed, T. Numerical Analysis of Mixed Convective Peristaltic Flow in a Vertical Channel in Presence of Heat Generation without using Lubrication Theory [Volume 10, Issue 6, 2017, Pages 1813-1827]
  • Jayachandran, T. Numerical Studies on Thrust Augmentation in High Area Ratio Rocket Nozzles by Secondary Injection [Volume 10, Issue 6, 2017, Pages 1605-1614]
  • Jayavel, S. Cross Flow past Circular Cylinder with Waviness in Confining Walls near the Cylinder [Volume 10, Issue 1, 2017, Pages 183-197]
  • Jelliti, M. Laminar Instability of Parallel and Nonparallel Flows of Adiabatic Flat Plate [Volume 10, Issue 2, 2017, Pages 605-614]
  • Jia, W. D. Measurement and Investigation on the Jet Interface Structure [Volume 10, Issue 6, 2017, Pages 1747-1758]
  • Jin, Z. Z. Vorticity-Based Study of Apparent Mass of Body of Revolution [Volume 10, Issue 3, 2017, Pages 881-887]
  • Joseph Sekhar, S. Analytical and Numerical Studies of a Steam Ejector on the Effect of Nozzle Exit Position and Suction Chamber Angle to Fluid Flow and System Performance [Volume 10, Issue 1, 2017, Pages 369-378]
  • Joseph Sekhar, S. Numerical Studies to Predict the Impact of Air Nozzle Position and Inclination on the Performance of Downdraft Gratifier [Volume 10, Issue 3, 2017, Pages 947-955]
  • Jouyandeh, M. Tangential Flow Analysis of Giesekus Model in Concentric Annulus with Both Cylinders Rotation [Volume 10, Issue 6, 2017, Pages 1721-1728]

K

  • Kaliyappan, P. An Experimental Investigation to Study the Performance and Emission Characteristics of Chicken Fat Oil Fuelled DI Diesel Engine [Volume 10, (Special Issue), 2017, Pages 85-91]
  • Kamal, H. Analysis of Interrupted Rectangular Microchannel Heat Sink with High Aspect Ratio [Volume 10, Issue 1, 2017, Pages 117-126]
  • Kamali, R. Experimental and Numerical Investigation of Drag Force at High Speed Diver Motion in Different Depths from Free Surface [Volume 10, Issue 1, 2017, Pages 343-352]
  • Kamali, R. Optimization of a Diver Propulsion Vehicle Hydrodynamics Parameter and its’ Shape Improvement by CFD Method for Improving Underwater Speed Record [Volume 10, Issue 5, 2017, Pages 1319-1328]
  • Kanfoudi, H. Numerical Study of Unsteady Cavitating Flows around a Hydrofoil [Volume 10, Issue 1, 2017, Pages 447-458]
  • Kanfoudi, H. Numerical Analysis of the Turbulent Flow Structure Induced by the Cavitation Shedding using LES [Volume 10, Issue 3, 2017, Pages 933-946]
  • Karbasi pour, M. Experimental Study of Natural Convective Flow over a Hot Horizontal Rhombus Cylinder Immersed in Water via PIV Technique [Volume 10, Issue 2, 2017, Pages 735-747]
  • Karimipour, A. Numerical Simulation of MHD Fluid Flow inside Constricted Channels using Lattice Boltzmann Method [Volume 10, Issue 6, 2017, Pages 1639-1648]
  • Karmakar, M. Kr Numerical Analysis of Gas-Solid Behavior in a Cyclone Separator for Circulating Fluidized Bed System [Volume 10, Issue 4, 2017, Pages 1167-1176]
  • Katragadda, Y. Effect of Liquid Viscosity and Solid Inventory on Hydrodynamics in a Liquid - solid Circulating Fluidized Bed [Volume 10, Issue 1, 2017, Pages 267-274]
  • Kaya, M. Prediction of Cavitation Performance of Radial Flow Pumps [Volume 10, Issue 5, 2017, Pages 1397-1408]
  • Kaynak, U. A Novel Alternating Cell Directions Implicit Method for the Solution of Incompressible Navier Stokes Equations on Unstructured Grids [Volume 10, Issue 6, 2017, Pages 1561-1570]
  • Kazemi, S. Study of Inertia and Compressibility Effects on the Density Wave Oscillations of Two-Phase Boiling Flows in Parallel Channels [Volume 10, Issue 6, 2017, Pages 1571-1581]
  • Keerthi Vasan, G. C. Determining the Thin Film Thickness of Two Phase Flow using Optics and Image Processing [Volume 10, Issue 3, 2017, Pages 925-932]
  • Khalili, B. Lattice Boltzmann Simulation of Solid Particles Motion in a Three Dimensional Flow using Smoothed Profile Method [Volume 10, Issue 4, 2017, Pages 1091-1103]
  • Khan, M. ء. Air Entrainment in High Pressure Multihole Gasoline Direct Injection Sprays [Volume 10, Issue 4, 2017, Pages 1223-1234]
  • Kharoua, N. Flow Dynamics of a Plane Jet Impinging on a Slotted Plate: Large Eddy Simulation [Volume 10, Issue 4, 2017, Pages 1211-1222]
  • Khezerloo, M. Enhancement of Mixing Performance of Non-Newtonian Fluids using Curving and Grooving of Microchannels [Volume 10, Issue 1, 2017, Pages 127-141]
  • Khezzar, L. Flow Dynamics of a Plane Jet Impinging on a Slotted Plate: Large Eddy Simulation [Volume 10, Issue 4, 2017, Pages 1211-1222]
  • Khmelev, V. N. Determination of the Modes and the Conditions of Ultrasonic Spraying Providing Specified Productivity and Dispersed Characteristics of the Aerosol [Volume 10, Issue 5, 2017, Pages 1409-1419]
  • Khorasanizadeh, H. Experimental Investigation of Laminar Convection Heat Transfer of Al2O3-Ethylene Glycol-Water Nanofluid as a Coolant in a Car Radiator [Volume 10, Issue 1, 2017, Pages 209-219]
  • Khorasanizadeh, H. Performance Evaluation of a Trapezoidal Microchannel Heat Sink with Various Entry/Exit Configurations Utilizing Variable Properties [Volume 10, Issue 6, 2017, Pages 1547-1559]
  • Kinaci, O. K. URANS-Based Prediction of Vortex Induced Vibrations of Circular Cylinders [Volume 10, Issue 3, 2017, Pages 957-970]
  • Koo, Y. M. Aerodynamically Efficient Rotor Design for Hovering Agricultural Unmanned Helicopter [Volume 10, Issue 5, 2017, Pages 1461-1474]
  • Korkmaz, E. Effects of Blade Discharge Angle, Blade Number and Splitter Blade Length on Deep Well Pump Performance [Volume 10, Issue 2, 2017, Pages 529-540]
  • Kriaa, W. Effect of the Number of Injectors on the Mixing Process in a Rapidly Mixed Type Tubular Flame Burner [Volume 10, Issue 2, 2017, Pages 595-603]
  • Kuang, H. Flow Mechanism for Stall Margin Improvement via Axial Slot Casing Treatment on a Transonic Axial Compressor [Volume 10, Issue 2, 2017, Pages 703-712]
  • Kumar, K. Effect of Horizontal Magnetic Field and Horizontal Rotation on Thermosolutal Stability of a Dusty Couple-Stress Fluid through a Porous Medium: a Brinkman Model [Volume 10, Issue 2, 2017, Pages 681-692]
  • Kumar, M. Hydrodynamic Modelling of Coal-Biomass Mixture in a Bubbling Fluidized Bed Reactor [Volume 10, Issue 5, 2017, Pages 1355-1362]
  • Kumar, N. A. Numerical Studies on Thrust Augmentation in High Area Ratio Rocket Nozzles by Secondary Injection [Volume 10, Issue 6, 2017, Pages 1605-1614]
  • Kumar, S. An Experimental Investigation to Study the Performance and Emission Characteristics of Chicken Fat Oil Fuelled DI Diesel Engine [Volume 10, (Special Issue), 2017, Pages 85-91]
  • Kumar Awasthi, M. Steady MHD Flow of Nano-Fluids over a Rotating Porous Disk in the Presence of Heat Generation/Absorption: a Numerical Study using PSO [Volume 10, Issue 3, 2017, Pages 871-879]
  • Kumar Roy, A. On Dispersion in Oscillatory Annular Flow Driven Jointly by Pressure Pulsation and Wall Oscillation [Volume 10, Issue 5, 2017, Pages 1487-1500]
  • Kundu, S. Prediction of Velocity-Dip-Position at the Central Section of Open Channels using Entropy Theory [Volume 10, Issue 1, 2017, Pages 221-229]
  • Kurbanoğlu, C. Effects of Blade Discharge Angle, Blade Number and Splitter Blade Length on Deep Well Pump Performance [Volume 10, Issue 2, 2017, Pages 529-540]

L

  • Laatar, A. H. Modelisation and Simulation of Heat and Mass Transfers during Solar Drying of Sewage Sludge with Introduction of Real Climatic Conditions [Volume 10, Issue 2, 2017, Pages 651-659]
  • Lakshmanan, P. An Experimental Investigation to Study the Performance and Emission Characteristics of Chicken Fat Oil Fuelled DI Diesel Engine [Volume 10, (Special Issue), 2017, Pages 85-91]
  • Lakshmanaprabu, S. K. Design of Centralized Fractional order PI Controller for Two Interacting Conical Frustum Tank Level Process [Volume 10, (Special Issue), 2017, Pages 23-32]
  • Laredj, N. Two-Dimensional Transient Modeling of Energy and Mass Transfer in Porous Building Components using COMSOL Multiphysics [Volume 10, Issue 1, 2017, Pages 319-328]
  • Latifi, A. Linear and Weakly Nonlinear Models of Wind Generated Surface Waves in Finite Depth [Volume 10, Issue 6, 2017, Pages 1829-1843]
  • Li, D. Y. Dynamic Simulation in Guide Vane Opening Process of a Pump-Turbine in Pump Mode [Volume 10, Issue 5, 2017, Pages 1441-1449]
  • Li, F. Synthetic Separation Control Using Vortex Generator and Slot Jet in a High Load Compressor Cascade [Volume 10, Issue 5, 2017, Pages 1305-1318]
  • Li, J. H. Investigations of Combustion Performance in LPP Combustor [Volume 10, Issue 5, 2017, Pages 1271-1282]
  • Li, W. H. Aerodynamic Study of Two Opposing Moving Trains in a Tunnel Based on Different Nose Contours [Volume 10, Issue 5, 2017, Pages 1375-1386]
  • Li, Z. Shape Optimization of a Kind of Earth Embankment Type Windbreak Wall along the Lanzhou-Xinjiang Railway [Volume 10, Issue 4, 2017, Pages 1189-1200]
  • Lili, T. Laminar Instability of Parallel and Nonparallel Flows of Adiabatic Flat Plate [Volume 10, Issue 2, 2017, Pages 605-614]
  • Linghu, Z. Flow Characteristics of a Pipe Diffuser for Centrifugal Compressors [Volume 10, Issue 1, 2017, Pages 143-155]
  • Liu, L. S. Instability of MHD Flow in the Duct with Electrically Perfectly Conducting Walls [Volume 10, Issue 5, 2017, Pages 1293-1304]
  • Liu, T. Shape Optimization of a Kind of Earth Embankment Type Windbreak Wall along the Lanzhou-Xinjiang Railway [Volume 10, Issue 4, 2017, Pages 1189-1200]
  • Liu, T. H. Aerodynamic Study of Two Opposing Moving Trains in a Tunnel Based on Different Nose Contours [Volume 10, Issue 5, 2017, Pages 1375-1386]
  • Liu, Y. P. Investigations of Combustion Performance in LPP Combustor [Volume 10, Issue 5, 2017, Pages 1271-1282]
  • Loh, W. K. Effects of Aspect Ratio in Moulded Packaging Considering Fluid/Structure Interaction: A CFD Modelling Approach [Volume 10, Issue 6, 2017, Pages 1799-1811]
  • Loha, C. Hydrodynamic Modelling of Coal-Biomass Mixture in a Bubbling Fluidized Bed Reactor [Volume 10, Issue 5, 2017, Pages 1355-1362]
  • Long, X. Maximum Smoke Temperature in Non-Smoke Model Evacuation Region for Semi-Transverse Tunnel Fire [Volume 10, Issue 4, 2017, Pages 1139-1151]
  • Lou, B. Maximum Smoke Temperature in Non-Smoke Model Evacuation Region for Semi-Transverse Tunnel Fire [Volume 10, Issue 4, 2017, Pages 1139-1151]
  • Lu, B. Flow and Solute Transport through a Single Fracture during the Biodegradation of Residual Toluene [Volume 10, Issue 6, 2017, Pages 1669-1677]
  • Luo, D. A Computational Study on the Performance Improvement of Low-Speed Axial Flow Fans with Microplates [Volume 10, Issue 6, 2017, Pages 1537-1546]

M

  • M, Muruganandam Experimental Analysis of Four Stroke Diesel Engine by using Carbon Nano Tubes Based Nano Fluids as a Coolant [Volume 10, (Special Issue), 2017, Pages 1-5]
  • M, Muruganandam Stability Analysis of Heat Transfer MWCNT with Different Base Fluids [Volume 10, (Special Issue), 2017, Pages 51-59]
  • Ma, S. Flow Mechanism for Stall Margin Improvement via Axial Slot Casing Treatment on a Transonic Axial Compressor [Volume 10, Issue 2, 2017, Pages 703-712]
  • Madoliat, R. Identification of Drag Force of the Underwater Vehicles [Volume 10, Issue 1, 2017, Pages 275-281]
  • Mahammedi, A. Numerical Investigation of the Performance of Kenics Static Mixers for the Agitation of Shear Thinning Fluids [Volume 10, Issue 3, 2017, Pages 989-999]
  • Maiti, P. Scattering of Fexural Gravity Waves by a Two-Dimensional Thin Plate [Volume 10, Issue 1, 2017, Pages 199-208]
  • Maizi, M. Reducing Noise Generated from a Wind Turbine Blade by Pitch Angle Control using CFD and Acoustic Analogy [Volume 10, Issue 4, 2017, Pages 1201-1209]
  • Makinde, O. D. Effects of Thermal Radiation on MHD Peristaltic Motion of Walters-B Fluid with Heat Source and Slip Conditions [Volume 10, Issue 4, 2017, Pages 1105-1112]
  • Maliki, M. Two-Dimensional Transient Modeling of Energy and Mass Transfer in Porous Building Components using COMSOL Multiphysics [Volume 10, Issue 1, 2017, Pages 319-328]
  • Manna, M. A. Linear and Weakly Nonlinear Models of Wind Generated Surface Waves in Finite Depth [Volume 10, Issue 6, 2017, Pages 1829-1843]
  • Mao, A. Y. Vorticity-Based Study of Apparent Mass of Body of Revolution [Volume 10, Issue 3, 2017, Pages 881-887]
  • Mérida, Y. Laminar Instability of Parallel and Nonparallel Flows of Adiabatic Flat Plate [Volume 10, Issue 2, 2017, Pages 605-614]
  • Meana-Fernández, A. Turbulence Structure around an Asymmetric High-Lift Airfoil for Different Incidence Angles [Volume 10, Issue 4, 2017, Pages 1013-1027]
  • Meghdadi Isfahani, A. H. A New Formulation for Prediction of Permeability of Nano Porous Structures using Lattice Botzmann Method [Volume 10, Issue 2, 2017, Pages 639-649]
  • Meher, R. Simulation of Imbibition Phenomena in Fluid Flow through Fractured Heterogeneous Porous Media with Different Porous Materials [Volume 10, Issue 5, 2017, Pages 1451-1460]
  • Mengi, S. A Novel Alternating Cell Directions Implicit Method for the Solution of Incompressible Navier Stokes Equations on Unstructured Grids [Volume 10, Issue 6, 2017, Pages 1561-1570]
  • Mesri, Y. Numerical Study on Fluid-Structure Interaction in a Patient-Specific Abdominal Aortic Aneurysm for Evaluating Wall Heterogeneity and Material Model Effects on its Rupture [Volume 10, Issue 6, 2017, Pages 1699-1709]
  • Mhiri, H. Effect of the Number of Injectors on the Mixing Process in a Rapidly Mixed Type Tubular Flame Burner [Volume 10, Issue 2, 2017, Pages 595-603]
  • Mihoubi, M. C. Reducing Noise Generated from a Wind Turbine Blade by Pitch Angle Control using CFD and Acoustic Analogy [Volume 10, Issue 4, 2017, Pages 1201-1209]
  • Mil-Martίnez, R. Influence of Smooth Constriction on Microstructure Evolution during Fluid Flow through a Tube [Volume 10, Issue 6, 2017, Pages 1583-1591]
  • Minaean, A. Experimental Study of Natural Convective Flow over a Hot Horizontal Rhombus Cylinder Immersed in Water via PIV Technique [Volume 10, Issue 2, 2017, Pages 735-747]
  • Mir, R. Heat and Mass Transfer Enhancement in Absorption of Vapor in Laminar Liquid Film by Adding Nano-Particles [Volume 10, Issue 6, 2017, Pages 1711-1720]
  • Missoum, H. Two-Dimensional Transient Modeling of Energy and Mass Transfer in Porous Building Components using COMSOL Multiphysics [Volume 10, Issue 1, 2017, Pages 319-328]
  • Moayed Mohseni, M. Tangential Flow Analysis of Giesekus Model in Concentric Annulus with Both Cylinders Rotation [Volume 10, Issue 6, 2017, Pages 1721-1728]
  • Moeini, M. New Perspectives on the Laminar Boundary Layer Physics in a Polarized Pressure Field with Temperature Gradient: an Analytical Approximation to Blasius Equation [Volume 10, Issue 4, 2017, Pages 1071-1077]
  • Moghimi, M. Experimental Investigation on Supercavitating Flow over Parabolic Cavitators [Volume 10, Issue 1, 2017, Pages 95-102]
  • Molavi, E. Experimental Investigation on Supercavitating Flow over Parabolic Cavitators [Volume 10, Issue 1, 2017, Pages 95-102]
  • Mondal, D. Scattering of Fexural Gravity Waves by a Two-Dimensional Thin Plate [Volume 10, Issue 1, 2017, Pages 199-208]
  • Montalvo, P. Linear and Weakly Nonlinear Models of Wind Generated Surface Waves in Finite Depth [Volume 10, Issue 6, 2017, Pages 1829-1843]
  • Moorthy, C. An Experimental Investigation to Study the Performance and Emission Characteristics of Chicken Fat Oil Fuelled DI Diesel Engine [Volume 10, (Special Issue), 2017, Pages 85-91]
  • Mortazavi, S. Three-Dimensional Numerical Simulation of Deformation of a Single Drop under Uniform Electric Field [Volume 10, Issue 2, 2017, Pages 693-702]
  • Mostafavi, M. A New Formulation for Prediction of Permeability of Nano Porous Structures using Lattice Botzmann Method [Volume 10, Issue 2, 2017, Pages 639-649]
  • Mukesh Kumar, P. C. Experimental Analysis of Four Stroke Diesel Engine by using Carbon Nano Tubes Based Nano Fluids as a Coolant [Volume 10, (Special Issue), 2017, Pages 1-5]
  • Mukesh Kumar, P. C. Heat Transfer Enhancement and Pressure Drop Analysis of a Cone Helical Coiled Tube Heat Exchanger using MWCNT/Water Nanofluid [Volume 10, (Special Issue), 2017, Pages 7-13]
  • Mukesh Kumar, P. C. Stability Analysis of Heat Transfer MWCNT with Different Base Fluids [Volume 10, (Special Issue), 2017, Pages 51-59]
  • Mukesh Kumar, P. C. Performance Enhancement and Emissions Analysis of Diesel Engine with Biodiesel, N-Propanol and 1-Butanol Blend [Volume 10, (Special Issue), 2017, Pages 79-84]
  • Mukhambetiyar, A. CFD Modelling of Flow Characteristics in Micro Shock Tubes [Volume 10, Issue 4, 2017, Pages 1061-1070]
  • Mulu, B. Effects of Upstream Flow Conditions on Runner Pressure Fluctuations [Volume 10, Issue 4, 2017, Pages 1045-1059]
  • Murugan, P. C. Numerical Studies to Predict the Impact of Air Nozzle Position and Inclination on the Performance of Downdraft Gratifier [Volume 10, Issue 3, 2017, Pages 947-955]
  • Murugesan, K. Numerical Study of Double Diffusive Convection in a Lid Driven Cavity with Linearly Salted Side Walls [Volume 10, Issue 1, 2017, Pages 69-79]
  • Murugesan, S. N. Heat Transfer Analysis of Flat Plate Subjected to Multi-Jet Air Impingement using Principal Component Analysis and Computational Technique [Volume 10, Issue 1, 2017, Pages 293-306]
  • Musoski, R. Hydrodynamics in the Blade Region of a Self-Aspirating Disk Impeller [Volume 10, Issue 4, 2017, Pages 1177-1188]

N

  • Nadaraja Pillai, S. Wind Tunnel Investigation of Downstream Wake Characteristics on Circular Cylinder with Various Taper Ratios [Volume 10, (Special Issue), 2017, Pages 69-77]
  • Nadeem, S. A Balloon Model Examination with Impulsion of Cu-Nanoparticles as Drug Agent through Stenosed Tapered Elastic Artery [Volume 10, Issue 6, 2017, Pages 1773-1783]
  • Naik, R. Numerical Simulation for Freeze Drying of Skimmed Milk with Moving Sublimation Front using Tri-Diagonal Matrix Algorithm [Volume 10, Issue 3, 2017, Pages 813-818]
  • Naqvi, M. A. Force Generation Mechanisms by an Insect Wing in an Idealized Hovering Motion [Volume 10, Issue 1, 2017, Pages 397-411]
  • Naqvi, M. A. Force Generation Mechanisms by an Insect Wing in Hovering Motion with Different Flipping Schedules [Volume 10, Issue 1, 2017, Pages 433-445]
  • Narasimha, K. R. Effect of Rayleigh Number with Rotation on Natural Convection in Differentially Heated Rotating Enclosure [Volume 10, Issue 4, 2017, Pages 1125-1138]
  • Narendra Kumar, M. Effect of Rayleigh Number with Rotation on Natural Convection in Differentially Heated Rotating Enclosure [Volume 10, Issue 4, 2017, Pages 1125-1138]
  • Nasif, M. S. Characteristics of CNG Bubbles in Diesel Flow under the Influence of the Magnetic Field [Volume 10, Issue 6, 2017, Pages 1649-1655]
  • Nasir, A. V. Design of Centralized Fractional order PI Controller for Two Interacting Conical Frustum Tank Level Process [Volume 10, (Special Issue), 2017, Pages 23-32]
  • Nesterov, V. A. Determination of the Modes and the Conditions of Ultrasonic Spraying Providing Specified Productivity and Dispersed Characteristics of the Aerosol [Volume 10, Issue 5, 2017, Pages 1409-1419]
  • Niazi, S. Study of Inertia and Compressibility Effects on the Density Wave Oscillations of Two-Phase Boiling Flows in Parallel Channels [Volume 10, Issue 6, 2017, Pages 1571-1581]
  • Niazmand, H. Numerical Study on Fluid-Structure Interaction in a Patient-Specific Abdominal Aortic Aneurysm for Evaluating Wall Heterogeneity and Material Model Effects on its Rupture [Volume 10, Issue 6, 2017, Pages 1699-1709]
  • Nili-Ahmadabadi, M. Experimental Study of Natural Convective Flow over a Hot Horizontal Rhombus Cylinder Immersed in Water via PIV Technique [Volume 10, Issue 2, 2017, Pages 735-747]
  • Norouzi, H. On the Mechanism of Drag Reduction in Fully-Developed Turbulent Channel Flow with a Streamwise Micro-featured Superhydrophobic Wall [Volume 10, Issue 5, 2017, Pages 1363-1374]
  • Nouri, N. M. Identification of Drag Force of the Underwater Vehicles [Volume 10, Issue 1, 2017, Pages 275-281]
  • Nouri, N. M. Experimental Investigation on Supercavitating Flow over Parabolic Cavitators [Volume 10, Issue 1, 2017, Pages 95-102]
  • Nouri, N. M. On the Mechanism of Drag Reduction in Fully-Developed Turbulent Channel Flow with a Streamwise Micro-featured Superhydrophobic Wall [Volume 10, Issue 5, 2017, Pages 1363-1374]
  • Nowruzi, H. Particle and Gas Flow Modeling of Wall-impinging Diesel Spray under Ultra-high Fuel Injection Pressures [Volume 10, Issue 5, 2017, Pages 1283-1291]

O

  • Ogata, S. Effect of Agar Jelly Coating in Rectangular Pipe to Flow Drag Reduction [Volume 10, Issue 4, 2017, Pages 1161-1166]
  • Okbaz, A. Experimental and Numerical Investigation of a Longfin Inshore Squid’s Flow Characteristics [Volume 10, Issue 1, 2017, Pages 21-30]
  • Okolo, P. N. A Novel Method for Defining the Leeward Edge of the Planar Jet in Crossflow [Volume 10, Issue 5, 2017, Pages 1475-1486]
  • Ooi, C. K. Effects of Aspect Ratio in Moulded Packaging Considering Fluid/Structure Interaction: A CFD Modelling Approach [Volume 10, Issue 6, 2017, Pages 1799-1811]
  • Ooi, R. C. Effects of Aspect Ratio in Moulded Packaging Considering Fluid/Structure Interaction: A CFD Modelling Approach [Volume 10, Issue 6, 2017, Pages 1799-1811]
  • Ortega, J. Influence of Smooth Constriction on Microstructure Evolution during Fluid Flow through a Tube [Volume 10, Issue 6, 2017, Pages 1583-1591]
  • Oueslati, M. M. Experimental Investigation of Tip Vortex Meandering in the Near Wake of a Horizontal-Axis Wind Turbine [Volume 10, Issue 6, 2017, Pages 1679-1688]
  • Ozbolat, V. Experimental and Numerical Investigation of a Longfin Inshore Squid’s Flow Characteristics [Volume 10, Issue 1, 2017, Pages 21-30]

P

  • Pakdee, W. Numerical Analysis on the Two-Dimensional Unsteady Magnetohydrodynamic Compressible Flow through a Porous Medium [Volume 10, Issue 4, 2017, Pages 1153-1159]
  • Palanisamy, K. Heat Transfer Enhancement and Pressure Drop Analysis of a Cone Helical Coiled Tube Heat Exchanger using MWCNT/Water Nanofluid [Volume 10, (Special Issue), 2017, Pages 7-13]
  • Pandey, K. M. Numerical Investigation of Detonation Combustion Wave in Pulse Detonation Combustor with Ejector [Volume 10, Issue 2, 2017, Pages 725-733]
  • Parishani, H. A Finite Volume Study on the Effects of Electro-Hydro-Dynamic Fluid Acceleration on Airflow Around a Cylinder at Low Reynolds Numbers [Volume 10, Issue 3, 2017, Pages 889-897]
  • Parthiban, A. Optimization of Abrasive Water Jet Cutting Parameter for AISI 316L Stainless Steel Sheet [Volume 10, (Special Issue), 2017, Pages 15-22]
  • Patel, A. Similarity Solution for a Cylindrical Shock Wave in a Self-gravitating, Rotating Axisymmetric Dusty Gas with Heat Conduction and Radiation Heat Flux [Volume 10, Issue 1, 2017, Pages 329-341]
  • Patel, H. S. Simulation of Imbibition Phenomena in Fluid Flow through Fractured Heterogeneous Porous Media with Different Porous Materials [Volume 10, Issue 5, 2017, Pages 1451-1460]
  • Paz, C. CFD Transient Simulation of a Breathing Cycle in an Oral-Nasal Extrathoracic Model [Volume 10, Issue 3, 2017, Pages 777-784]
  • Pekmen Geridonmez, B. RBF-DQ Solution of Natural Convection under the Effect of a Magnetic Field in a Tilted Cavity [Volume 10, Issue 2, 2017, Pages 499-507]
  • Porteiro, J. CFD Transient Simulation of a Breathing Cycle in an Oral-Nasal Extrathoracic Model [Volume 10, Issue 3, 2017, Pages 777-784]
  • Pundrika, G. Effect of Rayleigh Number with Rotation on Natural Convection in Differentially Heated Rotating Enclosure [Volume 10, Issue 4, 2017, Pages 1125-1138]

Q

  • Qi, N. M. Entropy Production Analysis for S-Characteristics of a Pump Turbine [Volume 10, Issue 6, 2017, Pages 1657-1668]
  • Qin, D. Q. Entropy Production Analysis for S-Characteristics of a Pump Turbine [Volume 10, Issue 6, 2017, Pages 1657-1668]
  • Qiu, Y. Maximum Smoke Temperature in Non-Smoke Model Evacuation Region for Semi-Transverse Tunnel Fire [Volume 10, Issue 4, 2017, Pages 1139-1151]

R

  • Rahimian, M. Development of an Acoustic Metamaterials for Aero Acoustic Noise Control [Volume 10, Issue 2, 2017, Pages 569-579]
  • Rahmanpour, M. Numerical Simulation of Highly Charged Droplets Dynamics with Primary Break-up in Electrospray at Sub Rayleigh Limit [Volume 10, Issue 2, 2017, Pages 541-550]
  • Rahnama, M. Lattice Boltzmann Simulation of Solid Particles Motion in a Three Dimensional Flow using Smoothed Profile Method [Volume 10, Issue 4, 2017, Pages 1091-1103]
  • Raisee, M. Computation of Developing Turbulent Flow through a Straight Asymmetric Diffuser with Moderate Adverse Pressure Gradient [Volume 10, Issue 4, 2017, Pages 1029-1043]
  • Raisee, M. Effects of Upstream Flow Conditions on Runner Pressure Fluctuations [Volume 10, Issue 4, 2017, Pages 1045-1059]
  • Rajmistry, S. Numerical Analysis of Gas-Solid Behavior in a Cyclone Separator for Circulating Fluidized Bed System [Volume 10, Issue 4, 2017, Pages 1167-1176]
  • Ramesh, A. S. Analytical and Numerical Studies of a Steam Ejector on the Effect of Nozzle Exit Position and Suction Chamber Angle to Fluid Flow and System Performance [Volume 10, Issue 1, 2017, Pages 369-378]
  • Ranjithkumar, M. An Experimental Investigation to Study the Performance and Emission Characteristics of Chicken Fat Oil Fuelled DI Diesel Engine [Volume 10, (Special Issue), 2017, Pages 85-91]
  • Rashidi, F. Tangential Flow Analysis of Giesekus Model in Concentric Annulus with Both Cylinders Rotation [Volume 10, Issue 6, 2017, Pages 1721-1728]
  • Rashidi, M. M. Oscillating Motion of an Oldroyd-B Fluid with Fractional Derivatives in a Circular Cylinder [Volume 10, Issue 5, 2017, Pages 1421-1426]
  • Raza, N. Oscillating Motion of an Oldroyd-B Fluid with Fractional Derivatives in a Circular Cylinder [Volume 10, Issue 5, 2017, Pages 1421-1426]
  • Reddy, N. Numerical Study of Double Diffusive Convection in a Lid Driven Cavity with Linearly Salted Side Walls [Volume 10, Issue 1, 2017, Pages 69-79]
  • Ren, F. Flow Characterizations and Drag Reduction on the Hydrophobic Surface with a Full Covering Gas Film [Volume 10, Issue 2, 2017, Pages 491-498]
  • Rezaei, S. Development of an Acoustic Metamaterials for Aero Acoustic Noise Control [Volume 10, Issue 2, 2017, Pages 569-579]
  • Rizzo-Sierra, J. A. Numerical Study on the Magnetohydrodynamics of a Liquid Metal Oscillatory Flow under Inductionless Approximation [Volume 10, Issue 1, 2017, Pages 459-477]
  • Roy Chowdhury, D. G. Numerical Studies on the Effect of Diffuser Rotational Speeds on Low Pressure Ratio Centrifugal Compressor Performance [Volume 10, Issue 3, 2017, Pages 785-799]
  • Ruivo, M. Linear and Weakly Nonlinear Models of Wind Generated Surface Waves in Finite Depth [Volume 10, Issue 6, 2017, Pages 1829-1843]

S

  • Saadat-Bakhsh, M. On the Mechanism of Drag Reduction in Fully-Developed Turbulent Channel Flow with a Streamwise Micro-featured Superhydrophobic Wall [Volume 10, Issue 5, 2017, Pages 1363-1374]
  • Sabura Banu, U. Design of Centralized Fractional order PI Controller for Two Interacting Conical Frustum Tank Level Process [Volume 10, (Special Issue), 2017, Pages 23-32]
  • Sacco, C. Flow Simulations with Ultra-Low Reynolds Numbers over Rigid and Flexible Airfoils Subject to Heaving and Flapping Motions [Volume 10, Issue 2, 2017, Pages 749-762]
  • Sadeghizadeh, M. R. Experimental and Numerical Investigation of Drag Force at High Speed Diver Motion in Different Depths from Free Surface [Volume 10, Issue 1, 2017, Pages 343-352]
  • Sadeghizadeh, M. R. Optimization of a Diver Propulsion Vehicle Hydrodynamics Parameter and its’ Shape Improvement by CFD Method for Improving Underwater Speed Record [Volume 10, Issue 5, 2017, Pages 1319-1328]
  • Sadrizadeh, S. Numerical, Experimental and Analytical Studies on Fluid Flow through a Marsh Funnel [Volume 10, Issue 6, 2017, Pages 1501-1507]
  • Saeedpanah, I. A MLPG Meshless Method for Numerical Simulation of Unsteady Incompressible Flows [Volume 10, Issue 1, 2017, Pages 421-432]
  • Safarpoor, Y. Numerical Comparison of the Parameters Influencing the Turbulent Flow using a T-shaped Spur Dike in a 90° Bend [Volume 10, Issue 1, 2017, Pages 231-241]
  • Saha, A. K. CFD Analysis for Non-Newtonian Pseudo Plastic Liquid Flow Through Small Diameter U-BEND [Volume 10, Issue 3, 2017, Pages 971-987]
  • Saha, A. K. On Dispersion in Oscillatory Annular Flow Driven Jointly by Pressure Pulsation and Wall Oscillation [Volume 10, Issue 5, 2017, Pages 1487-1500]
  • Sahin, B. Experimental and Numerical Investigation of a Longfin Inshore Squid’s Flow Characteristics [Volume 10, Issue 1, 2017, Pages 21-30]
  • Saikia, A. Hydrodynamic Modelling of Coal-Biomass Mixture in a Bubbling Fluidized Bed Reactor [Volume 10, Issue 5, 2017, Pages 1355-1362]
  • Sajid, M. Numerical Analysis of Mixed Convective Peristaltic Flow in a Vertical Channel in Presence of Heat Generation without using Lubrication Theory [Volume 10, Issue 6, 2017, Pages 1813-1827]
  • Saleh, H. Combined Solutal and Thermal Buoyancy Thermocapillary Convection in a Square Open Cavity [Volume 10, Issue 4, 2017, Pages 1113-1124]
  • Salehi, S. Computation of Developing Turbulent Flow through a Straight Asymmetric Diffuser with Moderate Adverse Pressure Gradient [Volume 10, Issue 4, 2017, Pages 1029-1043]
  • Salimpour, M. R. Effect of Reverting Channels on Heat Transfer Performance of Microchannels with Different Geometries [Volume 10, Issue 1, 2017, Pages 41-53]
  • Saranjam, B. Experimental and Numerical Investigation of Drag Force at High Speed Diver Motion in Different Depths from Free Surface [Volume 10, Issue 1, 2017, Pages 343-352]
  • Saranjam, B. Optimization of a Diver Propulsion Vehicle Hydrodynamics Parameter and its’ Shape Improvement by CFD Method for Improving Underwater Speed Record [Volume 10, Issue 5, 2017, Pages 1319-1328]
  • Sasongko, H. Dynamic Stall Prediction of a Pitching Airfoil using an Adjusted Two-Equation URANS Turbulence Model [Volume 10, Issue 1, 2017, Pages 1-10]
  • Sathish, S. Optimization of Abrasive Water Jet Cutting Parameter for AISI 316L Stainless Steel Sheet [Volume 10, (Special Issue), 2017, Pages 15-22]
  • Sathish, T. Performance Measurement on Extracted Bio-Diesel from Waste Plastic [Volume 10, (Special Issue), 2017, Pages 41-50]
  • Schulz, H. E. Oscillations of Water Levels in Vertical Semi-Immersed Tubes: Analytical Solutions and Experimental Verification [Volume 10, Issue 6, 2017, Pages 1515-1525]
  • Seetharamu, K. N. Effect of Rayleigh Number with Rotation on Natural Convection in Differentially Heated Rotating Enclosure [Volume 10, Issue 4, 2017, Pages 1125-1138]
  • Seifollahi Moghadam, Z. Flow Control of Transonic Airfoils using Optimum Suction and Injection Parameters [Volume 10, Issue 1, 2017, Pages 103-115]
  • Selenbas, B. Numerical and Experimental Investigation of Wiper System Performance at High Speeds [Volume 10, Issue 3, 2017, Pages 861-870]
  • Selim, S. M. Acoustic Detection of Cavitation Inception [Volume 10, Issue 1, 2017, Pages 31-40]
  • Selim, S. M. Experimental and Theoretical Investigation on the Effect of Pumped Water Temperature on Cavitation Breakdown in Centrifugal Pumps [Volume 10, Issue 4, 2017, Pages 1079-1089]
  • Selvakumar, A. Analysis of Ventilation Rate in Cross Ventilated Rooms by Varying Aperture Shape of Windows using CFD [Volume 10, (Special Issue), 2017, Pages 61-68]
  • Selvi, C. K. Peristaltic Pumping of a Generalized Newtonian Fluid in an Elastic Tube [Volume 10, Issue 6, 2017, Pages 1785-1798]
  • Sen, S. On the Response of a Freely Vibrating Thick Elliptic Cylinder of Low Mass Ratio [Volume 10, Issue 3, 2017, Pages 899-913]
  • Senthil Kumar, C. Wind Tunnel Investigation of Downstream Wake Characteristics on Circular Cylinder with Various Taper Ratios [Volume 10, (Special Issue), 2017, Pages 69-77]
  • Sepehrnia, M. Performance Evaluation of a Trapezoidal Microchannel Heat Sink with Various Entry/Exit Configurations Utilizing Variable Properties [Volume 10, Issue 6, 2017, Pages 1547-1559]
  • Seralathan, S. Numerical Studies on the Effect of Diffuser Rotational Speeds on Low Pressure Ratio Centrifugal Compressor Performance [Volume 10, Issue 3, 2017, Pages 785-799]
  • Sha, H. Flow and Solute Transport through a Single Fracture during the Biodegradation of Residual Toluene [Volume 10, Issue 6, 2017, Pages 1669-1677]
  • Shabani, R. Analyzing Free Vibration of a Cantilever Microbeam Submerged in Fluid with Free Boundary Approach [Volume 10, Issue 6, 2017, Pages 1593-1603]
  • Shademani, R. Asymmetric Water Entry of Twin Wedges with Different Deadrises, Heel Angles, and Wedge Separations using Finite Element Based Finite Volume Method and VOF [Volume 10, Issue 1, 2017, Pages 353-368]
  • Shah, D. A. Aerodynamics of Flapping Wings for Vertical Takeoff [Volume 10, Issue 6, 2017, Pages 1689-1697]
  • Shah, R. A. Free Surface Thin Film Flow of a Sisko’s Fluid over a Surface Topography [Volume 10, Issue 1, 2017, Pages 307-317]
  • Shahzad, A. Investigation of Corrugated Wing in Unsteady Motion [Volume 10, Issue 3, 2017, Pages 833-845]
  • Shalunov, A. V. Determination of the Modes and the Conditions of Ultrasonic Spraying Providing Specified Productivity and Dispersed Characteristics of the Aerosol [Volume 10, Issue 5, 2017, Pages 1409-1419]
  • Shalunova, A. V. Determination of the Modes and the Conditions of Ultrasonic Spraying Providing Specified Productivity and Dispersed Characteristics of the Aerosol [Volume 10, Issue 5, 2017, Pages 1409-1419]
  • Sharma, J. Modified Model for Binary Nanofluid Convection with Initial Constant Nanoparticle Volume Fraction [Volume 10, Issue 5, 2017, Pages 1387-1395]
  • Sharma, S. Effect of Horizontal Magnetic Field and Horizontal Rotation on Thermosolutal Stability of a Dusty Couple-Stress Fluid through a Porous Medium: a Brinkman Model [Volume 10, Issue 2, 2017, Pages 681-692]
  • Sharma, V. Modified Model for Binary Nanofluid Convection with Initial Constant Nanoparticle Volume Fraction [Volume 10, Issue 5, 2017, Pages 1387-1395]
  • Sheida, M. A New Approach to Reduce Memory Consumption in Lattice Boltzmann Method on GPU [Volume 10, Issue 1, 2017, Pages 55-67]
  • Sheikh, N. A. Air Entrainment in High Pressure Multihole Gasoline Direct Injection Sprays [Volume 10, Issue 4, 2017, Pages 1223-1234]
  • Sheikhzadeh, G. A. Experimental Investigation of Laminar Convection Heat Transfer of Al2O3-Ethylene Glycol-Water Nanofluid as a Coolant in a Car Radiator [Volume 10, Issue 1, 2017, Pages 209-219]
  • Shokrgozar Abbasi, A. Three-Dimensional Axisymmetric Solidification of a Viscous Incompressible Flow in the Stagnation Point Region [Volume 10, Issue 1, 2017, Pages 413-420]
  • Shukla, A. K. Convective Heat Transfer Enhancement using Slot Jet Impingement on a Detached Rib Surface [Volume 10, Issue 6, 2017, Pages 1615-1627]
  • Shyji, S. Numerical Studies on Thrust Augmentation in High Area Ratio Rocket Nozzles by Secondary Injection [Volume 10, Issue 6, 2017, Pages 1605-1614]
  • Siddiqa, S. Thermal Marangoni Convection of Two-phase Dusty Fluid Flow along a Vertical Wavy Surface [Volume 10, Issue 2, 2017, Pages 509-517]
  • Singh, V. Effect of Horizontal Magnetic Field and Horizontal Rotation on Thermosolutal Stability of a Dusty Couple-Stress Fluid through a Porous Medium: a Brinkman Model [Volume 10, Issue 2, 2017, Pages 681-692]
  • Sinha, A. N. Hydrodynamic Modelling of Coal-Biomass Mixture in a Bubbling Fluidized Bed Reactor [Volume 10, Issue 5, 2017, Pages 1355-1362]
  • Sivakumar, V. Analysis of Ventilation Rate in Cross Ventilated Rooms by Varying Aperture Shape of Windows using CFD [Volume 10, (Special Issue), 2017, Pages 61-68]
  • S. Nasif, M. Mathematical Modeling of the Flow of Diesel-CNG Fuel Mixture in a Pipe under the Influence of a Magnetic Field [Volume 10, Issue 1, 2017, Pages 389-396]
  • Sohn, C. H. Aerodynamically Efficient Rotor Design for Hovering Agricultural Unmanned Helicopter [Volume 10, Issue 5, 2017, Pages 1461-1474]
  • Solís-Gallego, I. Turbulence Structure around an Asymmetric High-Lift Airfoil for Different Incidence Angles [Volume 10, Issue 4, 2017, Pages 1013-1027]
  • Song, D. Flow Characterizations and Drag Reduction on the Hydrophobic Surface with a Full Covering Gas Film [Volume 10, Issue 2, 2017, Pages 491-498]
  • Song, Y. Aerodynamic Design and Performance Assessment of a Centripetal-Flow Fan [Volume 10, Issue 5, 2017, Pages 1343-1353]
  • Sourav, K. On the Response of a Freely Vibrating Thick Elliptic Cylinder of Low Mass Ratio [Volume 10, Issue 3, 2017, Pages 899-913]
  • Sreenadh, S. Peristaltic Pumping of a Generalized Newtonian Fluid in an Elastic Tube [Volume 10, Issue 6, 2017, Pages 1785-1798]
  • Sridhar, K. Computational Fluid Dynamic Analysis of Missile with Grid Fins [Volume 10, (Special Issue), 2017, Pages 33-39]
  • Srinivas, A. N. S. Peristaltic Pumping of a Generalized Newtonian Fluid in an Elastic Tube [Volume 10, Issue 6, 2017, Pages 1785-1798]
  • Srinivasan, R. Computational Fluid Dynamic Analysis of Missile with Grid Fins [Volume 10, (Special Issue), 2017, Pages 33-39]
  • Stelmach, J. Hydrodynamics in the Blade Region of a Self-Aspirating Disk Impeller [Volume 10, Issue 4, 2017, Pages 1177-1188]
  • Suárez, E. CFD Transient Simulation of a Breathing Cycle in an Oral-Nasal Extrathoracic Model [Volume 10, Issue 3, 2017, Pages 777-784]
  • Subaschandar, N. Behaviour of Mean Velocity in the Turbulent Axisymmetric Outer Near Wake [Volume 10, Issue 6, 2017, Pages 1629-1637]
  • Sug, X. Aerodynamic Design and Performance Assessment of a Centripetal-Flow Fan [Volume 10, Issue 5, 2017, Pages 1343-1353]
  • Sun, X. A Computational Study on the Performance Improvement of Low-Speed Axial Flow Fans with Microplates [Volume 10, Issue 6, 2017, Pages 1537-1546]
  • Sun, Z. Flow Characteristics of a Pipe Diffuser for Centrifugal Compressors [Volume 10, Issue 1, 2017, Pages 143-155]

T

  • Tabatabaei Malazi, M. Experimental and Numerical Investigation of a Longfin Inshore Squid’s Flow Characteristics [Volume 10, Issue 1, 2017, Pages 21-30]
  • Taeibi-Rahni, M. Numerical Investigation of Optimization of Injection Angle Effects on Fluidic Thrust Vectoring [Volume 10, Issue 1, 2017, Pages 157-167]
  • Taeibi-Rahni, M. A New Approach to Reduce Memory Consumption in Lattice Boltzmann Method on GPU [Volume 10, Issue 1, 2017, Pages 55-67]
  • Taherian, G. Experimental Study of Natural Convective Flow over a Hot Horizontal Rhombus Cylinder Immersed in Water via PIV Technique [Volume 10, Issue 2, 2017, Pages 735-747]
  • Tamagno, J. Flow Simulations with Ultra-Low Reynolds Numbers over Rigid and Flexible Airfoils Subject to Heaving and Flapping Motions [Volume 10, Issue 2, 2017, Pages 749-762]
  • Tan, Y. Flow and Solute Transport through a Single Fracture during the Biodegradation of Residual Toluene [Volume 10, Issue 6, 2017, Pages 1669-1677]
  • Tathiri, G. A Finite Volume Study on the Effects of Electro-Hydro-Dynamic Fluid Acceleration on Airflow Around a Cylinder at Low Reynolds Numbers [Volume 10, Issue 3, 2017, Pages 889-897]
  • Tavakoli, M. R. Effect of Reverting Channels on Heat Transfer Performance of Microchannels with Different Geometries [Volume 10, Issue 1, 2017, Pages 41-53]
  • Tiwari, S. Cross Flow past Circular Cylinder with Waviness in Confining Walls near the Cylinder [Volume 10, Issue 1, 2017, Pages 183-197]
  • Tomac, M. N. Effect of Geometry Modifications on the Vectoring Performance of a Controlled Jet [Volume 10, Issue 1, 2017, Pages 283-291]
  • Tuncer, I. H. A Novel Alternating Cell Directions Implicit Method for the Solution of Incompressible Navier Stokes Equations on Unstructured Grids [Volume 10, Issue 6, 2017, Pages 1561-1570]

U

  • Uddin, Z. Steady MHD Flow of Nano-Fluids over a Rotating Porous Disk in the Presence of Heat Generation/Absorption: a Numerical Study using PSO [Volume 10, Issue 3, 2017, Pages 871-879]
  • Ullas, G. Effect of Liquid Viscosity and Solid Inventory on Hydrodynamics in a Liquid - solid Circulating Fluidized Bed [Volume 10, Issue 1, 2017, Pages 267-274]

V

  • Vacca, A. A Strategy for Passive Control of Natural Roll-Waves in Power-Law Fluids through Inlet Boundary Conditions [Volume 10, Issue 2, 2017, Pages 667-680]
  • Vaghefi, M. Numerical Comparison of the Parameters Influencing the Turbulent Flow using a T-shaped Spur Dike in a 90° Bend [Volume 10, Issue 1, 2017, Pages 231-241]
  • Vakkachan, D. An Experimental Investigation to Study the Performance and Emission Characteristics of Chicken Fat Oil Fuelled DI Diesel Engine [Volume 10, (Special Issue), 2017, Pages 85-91]
  • Vargas, R. O. Influence of Smooth Constriction on Microstructure Evolution during Fluid Flow through a Tube [Volume 10, Issue 6, 2017, Pages 1583-1591]
  • Velarde-Suárez, S. Turbulence Structure around an Asymmetric High-Lift Airfoil for Different Incidence Angles [Volume 10, Issue 4, 2017, Pages 1013-1027]
  • Venkatesan, M. Determining the Thin Film Thickness of Two Phase Flow using Optics and Image Processing [Volume 10, Issue 3, 2017, Pages 925-932]
  • Venugopal, A. Effect of Liquid Viscosity and Solid Inventory on Hydrodynamics in a Liquid - solid Circulating Fluidized Bed [Volume 10, Issue 1, 2017, Pages 267-274]
  • Venugopal Reddy, K. Effects of Thermal Radiation on MHD Peristaltic Motion of Walters-B Fluid with Heat Source and Slip Conditions [Volume 10, Issue 4, 2017, Pages 1105-1112]
  • Veremieiev, S. Free Surface Thin Film Flow of a Sisko’s Fluid over a Surface Topography [Volume 10, Issue 1, 2017, Pages 307-317]
  • Verma, M. Hydrodynamic Modelling of Coal-Biomass Mixture in a Bubbling Fluidized Bed Reactor [Volume 10, Issue 5, 2017, Pages 1355-1362]
  • Vijayakumar, M. Performance Enhancement and Emissions Analysis of Diesel Engine with Biodiesel, N-Propanol and 1-Butanol Blend [Volume 10, (Special Issue), 2017, Pages 79-84]
  • Vijayan, V. Computational Fluid Dynamic Analysis of Missile with Grid Fins [Volume 10, (Special Issue), 2017, Pages 33-39]
  • Visagavel, K. Analysis of Ventilation Rate in Cross Ventilated Rooms by Varying Aperture Shape of Windows using CFD [Volume 10, (Special Issue), 2017, Pages 61-68]
  • Vishnu Kumar, G. C. Aerodynamics of Flapping Wings for Vertical Takeoff [Volume 10, Issue 6, 2017, Pages 1689-1697]

W

  • Wang, H. J. Dynamic Simulation in Guide Vane Opening Process of a Pump-Turbine in Pump Mode [Volume 10, Issue 5, 2017, Pages 1441-1449]
  • Wang, H. J. Entropy Production Analysis for S-Characteristics of a Pump Turbine [Volume 10, Issue 6, 2017, Pages 1657-1668]
  • Wang, H. K. Numerical Study of Flow Past Two Transversely Oscillating Triangular Cylinders in Tandem at Low Reynolds Number [Volume 10, Issue 5, 2017, Pages 1247-1260]
  • Wang, J. Numerical Simulation with a DES Approach for a High-Speed Train Subjected to the Crosswind [Volume 10, Issue 5, 2017, Pages 1329-1342]
  • Wang, J. Study of Snow Accumulation on a High-Speed Train’s Bogies Based on the Discrete Phase Model [Volume 10, Issue 6, 2017, Pages 1729-1745]
  • Wang, R. Synthetic Separation Control Using Vortex Generator and Slot Jet in a High Load Compressor Cascade [Volume 10, Issue 5, 2017, Pages 1305-1318]
  • Waskito, K. T. Effect of Agar Jelly Coating in Rectangular Pipe to Flow Drag Reduction [Volume 10, Issue 4, 2017, Pages 1161-1166]
  • Wei, X. Z. Dynamic Simulation in Guide Vane Opening Process of a Pump-Turbine in Pump Mode [Volume 10, Issue 5, 2017, Pages 1441-1449]
  • Wierciński, Z. Length Scale of Free Stream Turbulence and Its Impact on Bypass Transition in a Boundary Layer [Volume 10, Issue 2, 2017, Pages 713-724]
  • Won, Y. S. Aerodynamically Efficient Rotor Design for Hovering Agricultural Unmanned Helicopter [Volume 10, Issue 5, 2017, Pages 1461-1474]
  • Wu, C. C. A Novel Approach for Measurement of Peak Expiratory Velocity [Volume 10, Issue 1, 2017, Pages 379-387]
  • Wu, P. Synthetic Separation Control Using Vortex Generator and Slot Jet in a High Load Compressor Cascade [Volume 10, Issue 5, 2017, Pages 1305-1318]
  • Wu, S. Flow and Solute Transport through a Single Fracture during the Biodegradation of Residual Toluene [Volume 10, Issue 6, 2017, Pages 1669-1677]
  • Wu, T. Flow and Solute Transport through a Single Fracture during the Biodegradation of Residual Toluene [Volume 10, Issue 6, 2017, Pages 1669-1677]
  • Wu, Z. A Novel Method for Defining the Leeward Edge of the Planar Jet in Crossflow [Volume 10, Issue 5, 2017, Pages 1475-1486]
  • Wuli Chu, S. Flow Mechanism for Stall Margin Improvement via Axial Slot Casing Treatment on a Transonic Axial Compressor [Volume 10, Issue 2, 2017, Pages 703-712]

X

  • Xie, F. Study of Snow Accumulation on a High-Speed Train’s Bogies Based on the Discrete Phase Model [Volume 10, Issue 6, 2017, Pages 1729-1745]
  • Xie, T. Z. Aerodynamic Study of Two Opposing Moving Trains in a Tunnel Based on Different Nose Contours [Volume 10, Issue 5, 2017, Pages 1375-1386]
  • Xiong, X. Numerical Simulation with a DES Approach for a High-Speed Train Subjected to the Crosswind [Volume 10, Issue 5, 2017, Pages 1329-1342]
  • Xue, Q. Flow Characterizations and Drag Reduction on the Hydrophobic Surface with a Full Covering Gas Film [Volume 10, Issue 2, 2017, Pages 491-498]

Y

  • Yadav, D. Electrohydrodynamic Instability in a Heat Generating Porous Layer Saturated by a Dielectric Nanofluid [Volume 10, Issue 3, 2017, Pages 763-776]
  • Yan, Y. W. Investigations of Combustion Performance in LPP Combustor [Volume 10, Issue 5, 2017, Pages 1271-1282]
  • Yane, T. Behaviour of Mean Velocity in the Turbulent Axisymmetric Outer Near Wake [Volume 10, Issue 6, 2017, Pages 1629-1637]
  • Yang, M. G. Measurement and Investigation on the Jet Interface Structure [Volume 10, Issue 6, 2017, Pages 1747-1758]
  • Yang, X. A Novel Method for Defining the Leeward Edge of the Planar Jet in Crossflow [Volume 10, Issue 5, 2017, Pages 1475-1486]
  • Yanuar, . Effect of Agar Jelly Coating in Rectangular Pipe to Flow Drag Reduction [Volume 10, Issue 4, 2017, Pages 1161-1166]
  • Ye, X. M. Instability of MHD Flow in the Duct with Electrically Perfectly Conducting Walls [Volume 10, Issue 5, 2017, Pages 1293-1304]
  • Yousefifard, M. Particle and Gas Flow Modeling of Wall-impinging Diesel Spray under Ultra-high Fuel Injection Pressures [Volume 10, Issue 5, 2017, Pages 1283-1291]
  • Yu, F. M. A Novel Approach for Measurement of Peak Expiratory Velocity [Volume 10, Issue 1, 2017, Pages 379-387]
  • Yu, G. L. Numerical Study of Flow Past Two Transversely Oscillating Triangular Cylinders in Tandem at Low Reynolds Number [Volume 10, Issue 5, 2017, Pages 1247-1260]
  • Yuvakanit, B. Numerical Analysis on the Two-Dimensional Unsteady Magnetohydrodynamic Compressible Flow through a Porous Medium [Volume 10, Issue 4, 2017, Pages 1153-1159]

Z

  • Zgoll, R. Numerical Analysis of the Turbulent Flow Structure Induced by the Cavitation Shedding using LES [Volume 10, Issue 3, 2017, Pages 933-946]
  • Zgolli, R. Numerical Study of Unsteady Cavitating Flows around a Hydrofoil [Volume 10, Issue 1, 2017, Pages 447-458]
  • Zhai, Q. Numerical Study of Flow Past Two Transversely Oscillating Triangular Cylinders in Tandem at Low Reynolds Number [Volume 10, Issue 5, 2017, Pages 1247-1260]
  • Zhang, H. Flow Mechanism for Stall Margin Improvement via Axial Slot Casing Treatment on a Transonic Axial Compressor [Volume 10, Issue 2, 2017, Pages 703-712]
  • Zhang, J. Shape Optimization of a Kind of Earth Embankment Type Windbreak Wall along the Lanzhou-Xinjiang Railway [Volume 10, Issue 4, 2017, Pages 1189-1200]
  • Zhang, J. Numerical Simulation with a DES Approach for a High-Speed Train Subjected to the Crosswind [Volume 10, Issue 5, 2017, Pages 1329-1342]
  • Zhang, J. Aerodynamic Study of Two Opposing Moving Trains in a Tunnel Based on Different Nose Contours [Volume 10, Issue 5, 2017, Pages 1375-1386]
  • Zhang, J. Study of Snow Accumulation on a High-Speed Train’s Bogies Based on the Discrete Phase Model [Volume 10, Issue 6, 2017, Pages 1729-1745]
  • Zhang, W. A Novel Method for Defining the Leeward Edge of the Planar Jet in Crossflow [Volume 10, Issue 5, 2017, Pages 1475-1486]
  • Zhang, Y. Study of Snow Accumulation on a High-Speed Train’s Bogies Based on the Discrete Phase Model [Volume 10, Issue 6, 2017, Pages 1729-1745]
  • Zhang, Y. Study of Snow Accumulation on a High-Speed Train’s Bogies Based on the Discrete Phase Model [Volume 10, Issue 6, 2017, Pages 1729-1745]
  • Zhao, K. A Novel Method for Defining the Leeward Edge of the Planar Jet in Crossflow [Volume 10, Issue 5, 2017, Pages 1475-1486]
  • Zheng, X. Flow Characteristics of a Pipe Diffuser for Centrifugal Compressors [Volume 10, Issue 1, 2017, Pages 143-155]
  • Zheng, Z. Aerodynamic Design and Performance Assessment of a Centripetal-Flow Fan [Volume 10, Issue 5, 2017, Pages 1343-1353]
  • Zheng, Z. A Computational Study on the Performance Improvement of Low-Speed Axial Flow Fans with Microplates [Volume 10, Issue 6, 2017, Pages 1537-1546]
  • Zhou, P. Flow and Solute Transport through a Single Fracture during the Biodegradation of Residual Toluene [Volume 10, Issue 6, 2017, Pages 1669-1677]
  • Zhu, D. Z. Oscillations of Water Levels in Vertical Semi-Immersed Tubes: Analytical Solutions and Experimental Verification [Volume 10, Issue 6, 2017, Pages 1515-1525]
  • Zine-Dine, K. Heat and Mass Transfer Enhancement in Absorption of Vapor in Laminar Liquid Film by Adding Nano-Particles [Volume 10, Issue 6, 2017, Pages 1711-1720]
  • Zrikem, Z. Analysis of Turbulent Natural Convection by an Elliptic Relaxation Model in Tall Vertical Cavities with Linear Temperatures on Sidewalls [Volume 10, Issue 3, 2017, Pages 847-859]