Author Index

A

  • A. Aziz, A. Rashid Effect of Boost Pressure on the In-Cylinder Tumble-Motion of GDI Engine under Steady-State Conditions using Stereoscopic-PIV [Volume 11, Issue 3, 2018, Pages 733-742]
  • Abas, A. Particle Image Velocimetry and Finite Volume Method Study of Bi-leaflet Artificial Heart Valve [Volume 11, Issue 5, 2018, Pages 1365-1375]
  • Abdessemed, R. Modeling and Optimization of the Magnetohydrodynamic Conduction Pump by Particle Swarm Method [Volume 11, Issue 3, 2018, Pages 689-694]
  • Abouei Mehrizi, A. A Thoroughgoing Design of a Rapid-cycle Microfluidic Droplet-based PCR Device to Amplify Rare DNA Strands [Volume 11, Issue 1, 2018, Pages 21-29]
  • Abu Bakar, H. Particle Image Velocimetry and Finite Volume Method Study of Bi-leaflet Artificial Heart Valve [Volume 11, Issue 5, 2018, Pages 1365-1375]
  • Adeeb, E. Design Optimization of Ceiling Fan Blades with Nonlinear Sweep Profile [Volume 11, Issue 5, 2018, Pages 1153-1162]
  • Afaq, M. A. Design Optimization of Ceiling Fan Blades with Nonlinear Sweep Profile [Volume 11, Issue 5, 2018, Pages 1153-1162]
  • Ahangar Zonouzi, S. Experimental Study of Subcooled Boiling Heat Transfer of Axial and Swirling Flows inside Mini Annular Gaps [Volume 11, Issue 1, 2018, Pages 225-232]
  • Ahmadi Nadooshan, A. A Similarity Solution with Two-Equation Turbulence Model for Computation of Turbulent Film Condensation on a Vertical Surface [Volume 11, Issue 3, 2018, Pages 637-645]
  • Ahmadi Nadooshan, A. Development of the Couple Stress Relationships for the Power Law Fluid and the Solution of Flow in Ceramic Tape Casting Process [Volume 11, Issue 5, 2018, Pages 1239-1246]
  • Ahmad Nizam, L. Effect of Fin Geometry on Flow-Induced Vibration Response of a Finned Tube in a Tube Bundle [Volume 11, Issue 4, 2018, Pages 1143-1152]
  • Ahmed, M. Comparative Flow Field Analysis of Boundary Layer Diverter Intake and Diverterless Supersonic Intake Configuration [Volume 11, Issue 4, 2018, Pages 1125-1131]
  • Ahn, K. Flame Length Scaling of C2H4-Air Premixed Flames under Acoustic Forcing [Volume 11, Issue 3, 2018, Pages 647-654]
  • Ahn, K. Experimental and Theoretical Study on Spray Angles of Bi-Swirl Coaxial Injectors [Volume 11, Issue 5, 2018, Pages 1377-1386]
  • Aidoun, Z. Nozzle Displacement Effects on Two-Phase Ejector Performance: An Experimental Study [Volume 11, Issue 4, 2018, Pages 817-823]
  • Aksoy, I. G. A Performance Analysis on Pressure Loss and Airflow Diffusion in a Chamber with Perforated V-Profile Diffuser Designed for Air Handling Units (AHUs) [Volume 11, Issue 4, 2018, Pages 1089-1100]
  • Ali, Z. Simulation of a Standard Store Separated from Generic Wing [Volume 11, Issue 6, 2018, Pages 1579-1589]
  • Al-Rashed, A. A. A. A. CFD Investigation on the Steady Interaction between an Offset Jet and an Oblique Wall Jet [Volume 11, Issue 4, 2018, Pages 885-894]
  • Alshehhi, M. Effect of Solvent Contribution on Thermally Developing Flow of FENE-P Fluids between Parallel Plates [Volume 11, Issue 1, 2018, Pages 1-9]
  • Amahmid, A. On the Optimization of the Species Separation in an Inclined Darcy-Brinkman Porous Cavity under the Effect of an External Magnetic Field [Volume 11, Issue 4, 2018, Pages 1059-1071]
  • Ameer Ahsan, M. Effect of Fin Geometry on Flow-Induced Vibration Response of a Finned Tube in a Tube Bundle [Volume 11, Issue 4, 2018, Pages 1143-1152]
  • Ameur, H. Pressure Drop and Vortex Size of Power Law Fluids Flow in Branching Channels with Sudden Expansion [Volume 11, Issue 6, 2018, Pages 1739-1749]
  • Ameur, K. Nozzle Displacement Effects on Two-Phase Ejector Performance: An Experimental Study [Volume 11, Issue 4, 2018, Pages 817-823]
  • Amindari, A. Characterization of Disturbed Hemodynamics due to Stenosed Aortic Jets with a Lagrangian Coherent Structures Technique [Volume 11, Issue 2, 2018, Pages 375-384]
  • Aminfar, H. Mixed Convection Heat Transfer of Al2O3 Nanofluid on the Elliptical Shapes: Numerical Study of Irreversibility [Volume 11, Issue 1, 2018, Pages 177-189]
  • Aminfar, H. Experimental Study of Subcooled Boiling Heat Transfer of Axial and Swirling Flows inside Mini Annular Gaps [Volume 11, Issue 1, 2018, Pages 225-232]
  • Amirthalingam, P. Performance and Emission Characteristics of Biodiesel-Butanol Blended Fuel in Lhr Engine [Volume 11, (Special Issue), 2018, Pages 1-5]
  • An, G. Numerical Investigations into the Origin of Tip Unsteadiness in a Transonic Compressor [Volume 11, Issue 4, 2018, Pages 1133-1141]
  • An, Z. Detached Eddy Investigation of Conical Cavity Flow at Mach 0.9 [Volume 11, Issue 1, 2018, Pages 165-176]
  • Andrés, F. R. Smoothed Particle Hydrodynamics Method for Three-Dimensional Open Channel Flow Simulations [Volume 11, Issue 6, 2018, Pages 1599-1611]
  • Antony, A. J. Study of Effect of Flow Parameters on Base Pressure in a Suddenly Expanded Duct at Supersonic Mach Number Regimes using CFD and Design of Experiments [Volume 11, Issue 2, 2018, Pages 483-496]
  • Antony, Godwin Investigation of Performance and Emission Characteristics of Diesel Blends with Pine Oil [Volume 11, (Special Issue), 2018, Pages 63-67]
  • Antony, Godwin Experimental Investigation of the Effect of Compression Ratio in a Direct Injection Diesel Engine Fueled with Spirulina Algae Biodiesel [Volume 11, (Special Issue), 2018, Pages 107-114]
  • Aouinet, H. Hydrodynamics in Two-Phase Turbulent Boundary Layers [Volume 11, Issue 1, 2018, Pages 55-63]
  • Arif, I. Comparative Flow Field Analysis of Boundary Layer Diverter Intake and Diverterless Supersonic Intake Configuration [Volume 11, Issue 4, 2018, Pages 1125-1131]
  • Arif, I. Computational Analysis of Integrated Engine Exhaust Nozzle on a Supersonic Fighter Aircraft [Volume 11, Issue 6, 2018, Pages 1511-1520]
  • Arshad, H. Effect of Fin Geometry on Flow-Induced Vibration Response of a Finned Tube in a Tube Bundle [Volume 11, Issue 4, 2018, Pages 1143-1152]
  • Arthur, J. K. Porous Media Flow Transitioning into the Forchheimer Regime: a PIV Study [Volume 11, Issue 2, 2018, Pages 297-307]
  • Arun, S. Performance and Emission Characteristics of Biodiesel-Butanol Blended Fuel in Lhr Engine [Volume 11, (Special Issue), 2018, Pages 1-5]
  • Arunkumar, G. Experimental Heat Transfer Analysis on Heat Pipe using Sio2 and Tio2 Nano Fluid [Volume 11, (Special Issue), 2018, Pages 91-101]
  • Arun Kumar, C. M. Influence of Aspect Ratio on Thermal Performance of Heat Sink using Ansys [Volume 11, (Special Issue), 2018, Pages 45-52]
  • Asadollahi Ghohieh, A. Optimization of Freestream Flow Effects on Thrust Shock Vector Control Nozzle [Volume 11, Issue 2, 2018, Pages 361-374]
  • Atia, A. Transition from Steady to Oscillatory Flow Natural Convection of Low-Pr Fluids in 3D Bridgman Configuration for Crystal Growth [Volume 11, Issue 4, 2018, Pages 1021-1031]
  • Avudaiappan, T. Potential Flow Simulation through Lagrangian Interpolation Meshless Method Coding [Volume 11, (Special Issue), 2018, Pages 129-134]
  • Aydin, O. Natural Convection in an Enclosure with a Discretely Heated Sidewall: Heatlines and Flow Visualization [Volume 11, Issue 1, 2018, Pages 271-284]

B

  • Baheri Islami, S. Application of Electric Field to Developing Falling Films using Wire-Plate Electrode Configuration- An Experimental Study [Volume 11, Issue 5, 2018, Pages 1349-1363]
  • Bannour, S. Shielding Gas Coaxial Jet Pipes Numerical Study of a Vertical Laser Welding Process of AZ91 Magnesium Alloy [Volume 11, Issue 1, 2018, Pages 79-94]
  • Baradhan, P. Performance and Emission Characteristics of Biodiesel-Butanol Blended Fuel in Lhr Engine [Volume 11, (Special Issue), 2018, Pages 1-5]
  • Barani, G. A. Cavitation Damage Prediction on Dam Spillways using Fuzzy-KNN Modeling [Volume 11, Issue 2, 2018, Pages 323-329]
  • Bautista, O. Electroosmotic Pumping Between Two Immiscible Electrical Conducting Fluids Controlled by Interfacial Phenomena [Volume 11, Issue 3, 2018, Pages 667-678]
  • Bayeul-Lainé, A. C. Energy Extraction Performance Improvement of a Flapping Foil by the Use of Combined Foil [Volume 11, Issue 6, 2018, Pages 1651-1663]
  • Bedram, A. A Novel Method (T-Junction with a Tilted Slat) for Controlling Breakup Volume Ratio of Droplets in Micro and Nanofluidic T-Junctions [Volume 11, Issue 5, 2018, Pages 1255-1265]
  • Bel Hadj Taher, A. 3D Analyze of the Cavitation Mechanism in Turbulent Flow using Partially-Average Navier Stokes Model around the Clark-y Hydrofoil [Volume 11, Issue 6, 2018, Pages 1637-1649]
  • Ben Aissia, H. CFD Investigation on the Steady Interaction between an Offset Jet and an Oblique Wall Jet [Volume 11, Issue 4, 2018, Pages 885-894]
  • Benkahla, Y. K. Comparative Study of Reversal Flow during the Evaporation or Condensation of Water and Ethanol Film in a Vertical Channel [Volume 11, Issue 5, 2018, Pages 1421-1426]
  • Bennacer, R. Lubricant Rheological Behavior Effect Analysis on the Performance of Finite Porous Self- Lubricating Journal Bearings [Volume 11, Issue 6, 2018, Pages 1557-1568]
  • Benturki, M. Multi-Objective Optimization of Two-Stage Centrifugal Pump using NSGA-II Algorithm [Volume 11, Issue 4, 2018, Pages 929-943]
  • Benzaoui, A. Energy Extraction Performance Improvement of a Flapping Foil by the Use of Combined Foil [Volume 11, Issue 6, 2018, Pages 1651-1663]
  • Bhadauria, B. S. Study of Heat and Mass Transport in Bénard-Darcy Convection with G-Jitter and Variable Viscosity Liquids in a Porous Layer with Internal Heat Source [Volume 11, Issue 5, 2018, Pages 1217-1229]
  • Boroomand, B. Simulating Fluid and Structure Interaction using Exponential Basis Functions [Volume 11, Issue 3, 2018, Pages 787-799]
  • Bouabdallah, S. Transition from Steady to Oscillatory Flow Natural Convection of Low-Pr Fluids in 3D Bridgman Configuration for Crystal Growth [Volume 11, Issue 4, 2018, Pages 1021-1031]
  • Bouali, K. Modeling and Optimization of the Magnetohydrodynamic Conduction Pump by Particle Swarm Method [Volume 11, Issue 3, 2018, Pages 689-694]
  • Boualouache, A. Numerical Visualization of Plunging Water Jet using Volume of Fluid Model [Volume 11, Issue 1, 2018, Pages 95-105]
  • Boubendir, S. Lubricant Rheological Behavior Effect Analysis on the Performance of Finite Porous Self- Lubricating Journal Bearings [Volume 11, Issue 6, 2018, Pages 1557-1568]
  • Boudis, A. Energy Extraction Performance Improvement of a Flapping Foil by the Use of Combined Foil [Volume 11, Issue 6, 2018, Pages 1651-1663]
  • Boughanmi, C. Shielding Gas Coaxial Jet Pipes Numerical Study of a Vertical Laser Welding Process of AZ91 Magnesium Alloy [Volume 11, Issue 1, 2018, Pages 79-94]
  • Bouhelal, A. Numerical Investigation of Turbulent Flow around a Recent Horizontal Axis Wind Turbine using Low and High Reynolds Models [Volume 11, Issue 1, 2018, Pages 151-164]
  • Bournot, P. Shielding Gas Coaxial Jet Pipes Numerical Study of a Vertical Laser Welding Process of AZ91 Magnesium Alloy [Volume 11, Issue 1, 2018, Pages 79-94]
  • Boushaba, F. Dam-Break Computations by a Dynamical Adaptive Finite Volume Method [Volume 11, Issue 6, 2018, Pages 1543-1556]
  • Brodny, J. Determination of the Zone with a Particularly High Risk of Endogenous Fires in the Goaves of a Longwall with Caving [Volume 11, Issue 3, 2018, Pages 545-553]
  • Buradi, A. Effect of Stenosis Severity on Wall Shear Stress Based Hemodynamic Descriptors using Multiphase Mixture Theory [Volume 11, Issue 6, 2018, Pages 1497-1509]

C

  • Calchetti, G. Modeling and Simulation of an Oxygen-Blown Bubbling Fluidized Bed Gasifier using the Computational Particle-Fluid Dynamics (CPFD) Approach [Volume 11, Issue 4, 2018, Pages 825-834]
  • Canbazoglu, S. A Performance Analysis on Pressure Loss and Airflow Diffusion in a Chamber with Perforated V-Profile Diffuser Designed for Air Handling Units (AHUs) [Volume 11, Issue 4, 2018, Pages 1089-1100]
  • Cervantes, M. J. Investigation of the Numerical Methodology of a Model Wind Turbine Simulation [Volume 11, Issue 3, 2018, Pages 527-544]
  • Chávez, C. Snap-Off Criteria for Dynamic Flow Conditions in Constricted Circular Capillaries [Volume 11, Issue 2, 2018, Pages 447-457]
  • Chandhrasekar, M. Investigation of Performance and Emission Characters of Compression Ignition Engine Fuelled with Diesel Blends of Linseed and Cottonseed oil [Volume 11, (Special Issue), 2018, Pages 69-74]
  • Chandrasekar, M. Experimental Investigation on Heat Transfer and Pressure Drop in Double Helically Coiled Tube Heat Exchanger with MWCNT/Water Nanofluid [Volume 11, (Special Issue), 2018, Pages 23-29]
  • Charmiyan, M. Optimization of an Active Electrokinetic Micromixer Based on the Number and Arrangement of Microelectrodes [Volume 11, Issue 6, 2018, Pages 1531-1541]
  • Chatterjee, D. Numerical Visualization of Blast Wave Interacting with Objects [Volume 11, Issue 5, 2018, Pages 1201-1206]
  • Chen, H. Geometrical Optimization of an Inducer with Respect to Rotating Cavitation Generated Radial Forces by using an Orthogonal Experiment [Volume 11, Issue 6, 2018, Pages 1591-1598]
  • Chen, J. CFD Study on Jet Stirred Oxidation Pond of Absorption Tower in Power Plant [Volume 11, Issue 1, 2018, Pages 233-240]
  • Chen, Q. G. Periodic Moving Track Analysis of Spiral Oil Wedge Journal Bearing under Dynamic Loading [Volume 11, Issue 5, 2018, Pages 1193-1199]
  • Chen, W. Experimental and CFD Study of Internal Flow inside a Sessile Microdroplet undergoing Lateral Vibration [Volume 11, Issue 5, 2018, Pages 1247-1253]
  • Chen, Z. Reduced-Order Modeling of Unsteady Hypersonic Aerodynamics in Multi-Dimensional Parametric Space [Volume 11, Issue 4, 2018, Pages 1033-1045]
  • Chen, Z. Numerical Investigations into the Origin of Tip Unsteadiness in a Transonic Compressor [Volume 11, Issue 4, 2018, Pages 1133-1141]
  • Chinnarasu, K. Analysis of Varying Geometri Structures of Fins using Radiators [Volume 11, (Special Issue), 2018, Pages 115-119]
  • Chowdhary, A. Electrothermal Convection in Dielectric Maxwellian Nanofluid Layer [Volume 11, Issue 3, 2018, Pages 765-777]
  • Chu, W. L. Numerical Investigation of Fluid Flow Mechanism in the Back Shroud Cavity of a Centrifugal Pump [Volume 11, Issue 3, 2018, Pages 709-719]
  • Chung, C. Y. Effect of Turbulent Uniform Flow past a Two- Dimensional Square Cylinder [Volume 11, Issue 5, 2018, Pages 1185-1192]
  • Conejo, A. N. Effect of Separation Angle and Nozzle Radial Position on Mixing Time in Ladles with Two Nozzles [Volume 11, Issue 1, 2018, Pages 11-20]
  • Coutier Delgosha, O. Energy Extraction Performance Improvement of a Flapping Foil by the Use of Combined Foil [Volume 11, Issue 6, 2018, Pages 1651-1663]
  • Cuellar, V. Smoothed Particle Hydrodynamics Method for Three-Dimensional Open Channel Flow Simulations [Volume 11, Issue 6, 2018, Pages 1599-1611]
  • Cui, H. L. Micro-Vibration Analysis and Optimization of Aerostatic Bearing with Pocketed Orifice-Type Restrictor [Volume 11, Issue 4, 2018, Pages 1115-1124]
  • Czarnecki, M. Combined Methods in Preliminary Micro Scale Gas Turbine Diffuser Design – a Practical Approach [Volume 11, Issue 3, 2018, Pages 567-575]
  • Czupryna, J. CFD-Based Optimization of Micro Vortex Diodes [Volume 11, Issue 5, 2018, Pages 1231-1237]

D

  • Dai, W. Effects of Reinjection on Flow Field of Open Jet Automotive Wind Tunnel Test Section [Volume 11, Issue 1, 2018, Pages 43-53]
  • Dang, T. A. Experimental Investigation and Numerical Simulation of Morphological Changes in Natural Channel Bend [Volume 11, Issue 3, 2018, Pages 721-731]
  • Daoudi, S. Dam-Break Computations by a Dynamical Adaptive Finite Volume Method [Volume 11, Issue 6, 2018, Pages 1543-1556]
  • De Blas5, M. Smoothed Particle Hydrodynamics Method for Three-Dimensional Open Channel Flow Simulations [Volume 11, Issue 6, 2018, Pages 1599-1611]
  • Debnath, S. Transport of Reactive Species in Oscillatory Annular Flow [Volume 11, Issue 2, 2018, Pages 405-417]
  • Deepakaravind, V. Hardness and Thermal Analysis in Welded Butt Joint of Hybrid Aluminium (LM25) Metal Matrix Nano Composite Cylindrical Rod using TIG Welding Process [Volume 11, (Special Issue), 2018, Pages 79-89]
  • Deheri, G. M. Ferrofluid Based Squeeze Film Lubrication between Rough Stepped Plates with Couple Stress Effect [Volume 11, Issue 3, 2018, Pages 597-612]
  • De Maio, L. Sessile Drop on Oscillating Incline [Volume 11, Issue 6, 2018, Pages 1471-1476]
  • Deng, X. W. Steady-State Experiment and Simulation of Intake Ports in a Four-Valve Direct Injection Diesel Engine [Volume 11, Issue 1, 2018, Pages 217-224]
  • Devaradjane, G. Experimental and Computational Analysis on Aerodynamic Behavior of a Car Model with Vortex Generators at Different Yaw Angles [Volume 11, Issue 1, 2018, Pages 285-295]
  • Dey, S. Numerical Visualization of Blast Wave Interacting with Objects [Volume 11, Issue 5, 2018, Pages 1201-1206]
  • Dhahri, M. Hydrodynamics in Two-Phase Turbulent Boundary Layers [Volume 11, Issue 1, 2018, Pages 55-63]
  • Díaz, R. Smoothed Particle Hydrodynamics Method for Three-Dimensional Open Channel Flow Simulations [Volume 11, Issue 6, 2018, Pages 1599-1611]
  • Di Nardo, A. Modeling and Simulation of an Oxygen-Blown Bubbling Fluidized Bed Gasifier using the Computational Particle-Fluid Dynamics (CPFD) Approach [Volume 11, Issue 4, 2018, Pages 825-834]
  • Dinesh, S. Computational Analysis and Optimization of Spiral Plate Heat Exchanger [Volume 11, (Special Issue), 2018, Pages 121-128]
  • Dinesh, S. Potential Flow Simulation through Lagrangian Interpolation Meshless Method Coding [Volume 11, (Special Issue), 2018, Pages 129-134]
  • Dizene, R. Multi-Objective Optimization of Two-Stage Centrifugal Pump using NSGA-II Algorithm [Volume 11, Issue 4, 2018, Pages 929-943]
  • Djidjeli, K. Low Reynolds Number Effect on Energy Extraction Performance of Semi-Passive Flapping Foil [Volume 11, Issue 6, 2018, Pages 1613-1627]
  • Dol, S. S. Experimental Study on the Effects of Water-in-oil Emulsions to Wall Shear Stress in the Pipeline Flow [Volume 11, Issue 5, 2018, Pages 1309-1319]
  • Dong, L. Experimental and CFD Study of Internal Flow inside a Sessile Microdroplet undergoing Lateral Vibration [Volume 11, Issue 5, 2018, Pages 1247-1253]
  • Dong, W. Numerical Investigation of Fluid Flow Mechanism in the Back Shroud Cavity of a Centrifugal Pump [Volume 11, Issue 3, 2018, Pages 709-719]
  • Du, K. Effects of Reinjection on Flow Field of Open Jet Automotive Wind Tunnel Test Section [Volume 11, Issue 1, 2018, Pages 43-53]
  • Duan, R. Effect of Viscous Gas on Stability of the Electrified Liquid Sheet [Volume 11, Issue 5, 2018, Pages 1173-1183]
  • Dufresne, M. On the Determination of the Yield Surface within the Flow of Yield Stress Fluids using Computational Fluid Dynamics [Volume 11, Issue 4, 2018, Pages 971-982]
  • Dunlop, F. Sessile Drop on Oscillating Incline [Volume 11, Issue 6, 2018, Pages 1471-1476]

E

  • Ebrahimi, S. Mixed Convection Heat Transfer of Al2O3 Nanofluid on the Elliptical Shapes: Numerical Study of Irreversibility [Volume 11, Issue 1, 2018, Pages 177-189]
  • El Adawy, Mohammed Effect of Boost Pressure on the In-Cylinder Tumble-Motion of GDI Engine under Steady-State Conditions using Stereoscopic-PIV [Volume 11, Issue 3, 2018, Pages 733-742]
  • Elaskar, S. A. Scale-Adaptive Simulation of Flow around a Circular Cylinder near a Plane Boundary [Volume 11, Issue 6, 2018, Pages 1477-1488]
  • Engin, T. Design of a Mini Double-Discharge Centrifugal Pump under Multiphase Flow by CFD and Experimental Verification [Volume 11, Issue 5, 2018, Pages 1437-1448]
  • Erdoğan, A. A Performance Analysis on Pressure Loss and Airflow Diffusion in a Chamber with Perforated V-Profile Diffuser Designed for Air Handling Units (AHUs) [Volume 11, Issue 4, 2018, Pages 1089-1100]
  • Escandón, J. Electroosmotic Pumping Between Two Immiscible Electrical Conducting Fluids Controlled by Interfacial Phenomena [Volume 11, Issue 3, 2018, Pages 667-678]
  • Eskandari, M. On the Expedient Solution of the Boltzmann Equation by Modified Time Relaxed Monte Carlo (MTRMC) Method [Volume 11, Issue 3, 2018, Pages 655-666]
  • Esmaelnajad, R. Numerical Study on the Effect of an Annulus Injector on the Hydrodynamic Behavior of a Spray [Volume 11, Issue 4, 2018, Pages 983-994]

F

  • Fadaei Kermani, E. Cavitation Damage Prediction on Dam Spillways using Fuzzy-KNN Modeling [Volume 11, Issue 2, 2018, Pages 323-329]
  • Fang, F. M. Effect of Turbulent Uniform Flow past a Two- Dimensional Square Cylinder [Volume 11, Issue 5, 2018, Pages 1185-1192]
  • Fawzy, H. Performance Enhancement of Centrifugal Compressor with Addition of Splitter Blade Close to Pressure Surface [Volume 11, Issue 4, 2018, Pages 919-928]
  • Faye, I. An Optical Flow Measurement Technique based on Continuous Wavelet Transform [Volume 11, Issue 3, 2018, Pages 695-707]
  • Feddaoui, M. Comparative Study of Reversal Flow during the Evaporation or Condensation of Water and Ethanol Film in a Vertical Channel [Volume 11, Issue 5, 2018, Pages 1421-1426]
  • Feizi Chekab, M. A. Preliminary Experimental Investigation on a Low Profile Magneto-Hydrodynamic Propulsive Blanket, Considering Plasma Generation [Volume 11, Issue 4, 2018, Pages 957-963]
  • Ferrer, V. Numerical Simulation of the Non-Isothermal Co-Extrusion Fiber Spinning with Flow-Induced Crystallization [Volume 11, Issue 5, 2018, Pages 1207-1215]
  • Filali, A. Effect of Solvent Contribution on Thermally Developing Flow of FENE-P Fluids between Parallel Plates [Volume 11, Issue 1, 2018, Pages 1-9]
  • Forghany, F. Optimization of Freestream Flow Effects on Thrust Shock Vector Control Nozzle [Volume 11, Issue 2, 2018, Pages 361-374]
  • Forouzani, H. A Study on the Motion of High Speed Supercavitating Projectiles [Volume 11, Issue 6, 2018, Pages 1727-1738]
  • Fouladi, K. CFD-Based Optimization of Micro Vortex Diodes [Volume 11, Issue 5, 2018, Pages 1231-1237]
  • Fuentes, C. Snap-Off Criteria for Dynamic Flow Conditions in Constricted Circular Capillaries [Volume 11, Issue 2, 2018, Pages 447-457]

G

  • Ganeshan, P. Optimization and Biodiesel Production from Prosopis Julifera Oil with High Free Fatty Acids [Volume 11, Issue 1, 2018, Pages 257-270]
  • Gao, D. Rollover Mechanism Methodology of LNG Tank with Gas-Liquid Stratification Based on Curvelet Finite Element Method and Large Eddy Simulation Technology [Volume 11, Issue 3, 2018, Pages 779-786]
  • García, B. E. Numerical Simulation of the Non-Isothermal Co-Extrusion Fiber Spinning with Flow-Induced Crystallization [Volume 11, Issue 5, 2018, Pages 1207-1215]
  • García, J. L. Smoothed Particle Hydrodynamics Method for Three-Dimensional Open Channel Flow Simulations [Volume 11, Issue 6, 2018, Pages 1599-1611]
  • Gayen, R. Wave Motion due to a Ring Source in Two Superposed Fluids Covered by a Thin Elastic Plate [Volume 11, Issue 4, 2018, Pages 1047-1057]
  • Ghadimi, A. Preliminary Experimental Investigation on a Low Profile Magneto-Hydrodynamic Propulsive Blanket, Considering Plasma Generation [Volume 11, Issue 4, 2018, Pages 957-963]
  • Ghadimi, P. Statistical Analysis of Wedge Effect on the Seakeeping of a Planing Hull in Irregular Waves at the Onset of the Planing Region [Volume 11, Issue 4, 2018, Pages 905-918]
  • Ghadimi, P. Preliminary Experimental Investigation on a Low Profile Magneto-Hydrodynamic Propulsive Blanket, Considering Plasma Generation [Volume 11, Issue 4, 2018, Pages 957-963]
  • Ghaeini-Hessaroeyeh, M. Cavitation Damage Prediction on Dam Spillways using Fuzzy-KNN Modeling [Volume 11, Issue 2, 2018, Pages 323-329]
  • Gharraei, R. Application of Electric Field to Developing Falling Films using Wire-Plate Electrode Configuration- An Experimental Study [Volume 11, Issue 5, 2018, Pages 1349-1363]
  • Ghasemiasl, R. Experimental Investigation of Flow Control over an Ahmed Body using DBD Plasma Actuator [Volume 11, Issue 5, 2018, Pages 1267-1276]
  • Ghasempour, R. Effect of Channel Boundary Conditions in Predicting Hydraulic Jump Characteristics using an ANFIS-Based Approach [Volume 11, Issue 3, 2018, Pages 555-565]
  • Ghassemi, H. On the Instability of Two Dimensional Backward-Facing Step Flow using Energy Gradient Method [Volume 11, Issue 1, 2018, Pages 241-256]
  • Ghassemi, H. Numerical Analysis of the Effects of Riblets on Drag Reduction of a Flat Plate [Volume 11, Issue 3, 2018, Pages 679-688]
  • Ghassemi, H. Two Semi-Analytical Methods Applied to Hydrodynamic Stability of Dean Flow [Volume 11, Issue 5, 2018, Pages 1427-1435]
  • Ghenaiet, A. Multi-Objective Optimization of Two-Stage Centrifugal Pump using NSGA-II Algorithm [Volume 11, Issue 4, 2018, Pages 929-943]
  • Ghernaout, B. Transition from Steady to Oscillatory Flow Natural Convection of Low-Pr Fluids in 3D Bridgman Configuration for Crystal Growth [Volume 11, Issue 4, 2018, Pages 1021-1031]
  • Ghufran Bhatti, O. Effect of Fin Geometry on Flow-Induced Vibration Response of a Finned Tube in a Tube Bundle [Volume 11, Issue 4, 2018, Pages 1143-1152]
  • Gómez, A. S. Effect of Separation Angle and Nozzle Radial Position on Mixing Time in Ladles with Two Nozzles [Volume 11, Issue 1, 2018, Pages 11-20]
  • González-Sosa, E. Snap-Off Criteria for Dynamic Flow Conditions in Constricted Circular Capillaries [Volume 11, Issue 2, 2018, Pages 447-457]
  • Gopal, P. Investigation of Performance and Emission Characteristics of Diesel Blends with Pine Oil [Volume 11, (Special Issue), 2018, Pages 63-67]
  • Gopal, P. Co-Combustion Analysis of Lignite Coal and Groundnut Shell using TGA [Volume 11, (Special Issue), 2018, Pages 75-78]
  • Gopal, P. Hardness and Thermal Analysis in Welded Butt Joint of Hybrid Aluminium (LM25) Metal Matrix Nano Composite Cylindrical Rod using TIG Welding Process [Volume 11, (Special Issue), 2018, Pages 79-89]
  • Goudarzi, M. A. An Innovative Roof Shape in Liquid Storage Tanks to Reduce Dynamic Sloshing Effects [Volume 11, Issue 1, 2018, Pages 127-136]
  • Govindasamy, P. Experimental Investigation of the Effect of Compression Ratio in a Direct Injection Diesel Engine Fueled with Spirulina Algae Biodiesel [Volume 11, (Special Issue), 2018, Pages 107-114]
  • Grioni, M. Scale-Adaptive Simulation of Flow around a Circular Cylinder near a Plane Boundary [Volume 11, Issue 6, 2018, Pages 1477-1488]
  • Gu, C. Flow Simulation of Various Riblet Shapes and a Uniform Model for Boundary Layer [Volume 11, Issue 3, 2018, Pages 755-764]
  • Guerri, O. Numerical Investigation of Turbulent Flow around a Recent Horizontal Axis Wind Turbine using Low and High Reynolds Models [Volume 11, Issue 1, 2018, Pages 151-164]
  • Guerri, O. Energy Extraction Performance Improvement of a Flapping Foil by the Use of Combined Foil [Volume 11, Issue 6, 2018, Pages 1651-1663]
  • Gupta, B. R. Drag Experienced by a Composite Sphere in an Axisymmetric Creeping Flow of Micropolar Fluid [Volume 11, Issue 4, 2018, Pages 995-1004]
  • Gupta, U. Electrothermal Convection in Dielectric Maxwellian Nanofluid Layer [Volume 11, Issue 3, 2018, Pages 765-777]

H

  • Hafizah Mokhtar, N. Particle Image Velocimetry and Finite Volume Method Study of Bi-leaflet Artificial Heart Valve [Volume 11, Issue 5, 2018, Pages 1365-1375]
  • Haghshenas, M. Lattice Boltzmann Numerical Investigation of Inner Cylindrical Pin-fins Configuration on Nanofluid Natural Convective Heat Transfer in Porous Enclosure [Volume 11, Issue 3, 2018, Pages 801-816]
  • Hajilary, N. New Permeability Model for Gel Coated Porous Media with Radial Flow [Volume 11, Issue 2, 2018, Pages 397-404]
  • Hamdani, H. Systematic Investigation of Thrust Production during Plunging Motion of the Airfoil [Volume 11, Issue 4, 2018, Pages 1073-1088]
  • Hamedi, M. H. A Novel Method (T-Junction with a Tilted Slat) for Controlling Breakup Volume Ratio of Droplets in Micro and Nanofluidic T-Junctions [Volume 11, Issue 5, 2018, Pages 1255-1265]
  • Han, S. Rollover Mechanism Methodology of LNG Tank with Gas-Liquid Stratification Based on Curvelet Finite Element Method and Large Eddy Simulation Technology [Volume 11, Issue 3, 2018, Pages 779-786]
  • Hansen, M. O. L. 2-D CFD Computations of the Two-Bladed Darrieus-Type Wind Turbine [Volume 11, Issue 4, 2018, Pages 835-845]
  • Hariharan, K. B. Analysis of Varying Geometri Structures of Fins using Radiators [Volume 11, (Special Issue), 2018, Pages 115-119]
  • Hashim, F. M. An Optical Flow Measurement Technique based on Continuous Wavelet Transform [Volume 11, Issue 3, 2018, Pages 695-707]
  • Hasnaoui, M. On the Optimization of the Species Separation in an Inclined Darcy-Brinkman Porous Cavity under the Effect of an External Magnetic Field [Volume 11, Issue 4, 2018, Pages 1059-1071]
  • He, G. Q. Swirl Characteristics of Vortex Valve Variable-Thrust Solid Rocket Motor [Volume 11, Issue 1, 2018, Pages 205-215]
  • Heidarian, A. Numerical Analysis of the Effects of Riblets on Drag Reduction of a Flat Plate [Volume 11, Issue 3, 2018, Pages 679-688]
  • Heikal, M. R. Effect of Boost Pressure on the In-Cylinder Tumble-Motion of GDI Engine under Steady-State Conditions using Stereoscopic-PIV [Volume 11, Issue 3, 2018, Pages 733-742]
  • Heirani Nobari, M. R. Application of Electric Field to Developing Falling Films using Wire-Plate Electrode Configuration- An Experimental Study [Volume 11, Issue 5, 2018, Pages 1349-1363]
  • Hnaien, N. CFD Investigation on the Steady Interaction between an Offset Jet and an Oblique Wall Jet [Volume 11, Issue 4, 2018, Pages 885-894]
  • Hosien, M. A. Computational and Experimental Study on the Water-Jet Pump Performance [Volume 11, Issue 4, 2018, Pages 1013-1020]
  • Hosseini Doust, M. Accuracy of Dynamic Stall Response for Wind Turbine Airfoils Based On Semi-Empirical and Numerical Methods [Volume 11, Issue 5, 2018, Pages 1287-1296]
  • Hu, Y. Numerical Investigation on Temperature and Flow Characteristics of a Tornado-Like Vortex by using Large-Eddy Simulation [Volume 11, Issue 3, 2018, Pages 585-595]
  • Hua, M. Numerical Study on the Smoke Flow Characterization and Phenomenon of Plug-Holing under Lateral Smoke Exhaust in Tunnel Fire [Volume 11, Issue 1, 2018, Pages 115-126]
  • Huang, R. Reduced-Order Modeling of Unsteady Hypersonic Aerodynamics in Multi-Dimensional Parametric Space [Volume 11, Issue 4, 2018, Pages 1033-1045]
  • Huang, S. A Data Exchange Algorithm for One Way Fluid-Structure Interaction Analysis and its Application on High-Speed Train Coupling Interface [Volume 11, Issue 2, 2018, Pages 519-526]
  • Huang, X. L. Numerical Investigation on Temperature and Flow Characteristics of a Tornado-Like Vortex by using Large-Eddy Simulation [Volume 11, Issue 3, 2018, Pages 585-595]
  • Hwang, D. Flame Length Scaling of C2H4-Air Premixed Flames under Acoustic Forcing [Volume 11, Issue 3, 2018, Pages 647-654]

I

  • Ibrahim, S. An Investigation of Air Flow and Thermal Comfort of Modified Conventional Car Cabin Using Computerized Fluid Dynamics [Volume 11, (Special Issue), 2018, Pages 141-150]
  • Isenmann, G. On the Determination of the Yield Surface within the Flow of Yield Stress Fluids using Computational Fluid Dynamics [Volume 11, Issue 4, 2018, Pages 971-982]
  • Islam, N. Wave Motion due to a Ring Source in Two Superposed Fluids Covered by a Thin Elastic Plate [Volume 11, Issue 4, 2018, Pages 1047-1057]

J

  • Jafari, M. Numerical Study on the Effect of an Annulus Injector on the Hydrodynamic Behavior of a Spray [Volume 11, Issue 4, 2018, Pages 983-994]
  • Jafari, Y. Lattice Boltzmann Numerical Investigation of Inner Cylindrical Pin-fins Configuration on Nanofluid Natural Convective Heat Transfer in Porous Enclosure [Volume 11, Issue 3, 2018, Pages 801-816]
  • Jahanshaloo, L. Mixed Convection Heat Transfer of Al2O3 Nanofluid on the Elliptical Shapes: Numerical Study of Irreversibility [Volume 11, Issue 1, 2018, Pages 177-189]
  • Jain, V. Complex Behavior of Polymers as Drag Reducing Agents Through Pipe Fittings [Volume 11, Issue 2, 2018, Pages 467-474]
  • Javed, A. Low Reynolds Number Effect on Energy Extraction Performance of Semi-Passive Flapping Foil [Volume 11, Issue 6, 2018, Pages 1613-1627]
  • Jay, J. CFD Investigation on the Steady Interaction between an Offset Jet and an Oblique Wall Jet [Volume 11, Issue 4, 2018, Pages 885-894]
  • Jayavel, C. An Explicit Approach of Natural Ventilation for Various Orientation of Wind Catcher Openings using CFD [Volume 11, (Special Issue), 2018, Pages 103-105]
  • Jia, D. W. Steady-State Experiment and Simulation of Intake Ports in a Four-Valve Direct Injection Diesel Engine [Volume 11, Issue 1, 2018, Pages 217-224]
  • Jiang, J. Numerical Study on the Smoke Flow Characterization and Phenomenon of Plug-Holing under Lateral Smoke Exhaust in Tunnel Fire [Volume 11, Issue 1, 2018, Pages 115-126]
  • Jin, W. Coefficient Adaptation Method for the Zwart Model [Volume 11, Issue 6, 2018, Pages 1665-1678]
  • John, B. Alterations of Cowl Lip for the Improvement of Supersonic-Intake Performance [Volume 11, Issue 1, 2018, Pages 31-41]

K

  • Kabiri, M. M. An Innovative Roof Shape in Liquid Storage Tanks to Reduce Dynamic Sloshing Effects [Volume 11, Issue 1, 2018, Pages 127-136]
  • Kadid, F. Z. Modeling and Optimization of the Magnetohydrodynamic Conduction Pump by Particle Swarm Method [Volume 11, Issue 3, 2018, Pages 689-694]
  • Kamali, R. Evaluating the Effects of Blade Tip Clearance in Various Stages on the Performance of an Axial Compressor [Volume 11, Issue 2, 2018, Pages 475-481]
  • Kamali, R. Experimental and Numerical Study of a Submarine and Propeller Behaviors in Submergence and Surface Conditions [Volume 11, Issue 5, 2018, Pages 1297-1308]
  • Kamali, R. A Study on the Motion of High Speed Supercavitating Projectiles [Volume 11, Issue 6, 2018, Pages 1727-1738]
  • Kamer, M. S. A Performance Analysis on Pressure Loss and Airflow Diffusion in a Chamber with Perforated V-Profile Diffuser Designed for Air Handling Units (AHUs) [Volume 11, Issue 4, 2018, Pages 1089-1100]
  • Kanfoudi, H. 3D Analyze of the Cavitation Mechanism in Turbulent Flow using Partially-Average Navier Stokes Model around the Clark-y Hydrofoil [Volume 11, Issue 6, 2018, Pages 1637-1649]
  • Karami, F. Development of the Couple Stress Relationships for the Power Law Fluid and the Solution of Flow in Ceramic Tape Casting Process [Volume 11, Issue 5, 2018, Pages 1239-1246]
  • Karan, S. Analysis of Varying Geometri Structures of Fins using Radiators [Volume 11, (Special Issue), 2018, Pages 115-119]
  • Karimian, S. Accuracy of Dynamic Stall Response for Wind Turbine Airfoils Based On Semi-Empirical and Numerical Methods [Volume 11, Issue 5, 2018, Pages 1287-1296]
  • Kataria, M. Characterization of Magnetorheological Finishing Fluid for Continuous Flow Finishing Process [Volume 11, Issue 6, 2018, Pages 1751-1763]
  • Kavitha, R. A Comparison between MLP and SVR Models in Prediction of Thermal Properties of Nano Fluids [Volume 11, (Special Issue), 2018, Pages 7-14]
  • Kaya, A. A Performance Analysis on Pressure Loss and Airflow Diffusion in a Chamber with Perforated V-Profile Diffuser Designed for Air Handling Units (AHUs) [Volume 11, Issue 4, 2018, Pages 1089-1100]
  • Kemerli, M. Design of a Mini Double-Discharge Centrifugal Pump under Multiphase Flow by CFD and Experimental Verification [Volume 11, Issue 5, 2018, Pages 1437-1448]
  • Keshavarzian, B. Optimization of an Active Electrokinetic Micromixer Based on the Number and Arrangement of Microelectrodes [Volume 11, Issue 6, 2018, Pages 1531-1541]
  • Khadem Abolfazli, H. R. Effects of Gas Cross-over through the Membrane on Water Management in the Cathode and Anode Sides of PEM Fuel Cell [Volume 11, Issue 4, 2018, Pages 861-875]
  • Khaleghi, H. Effects of Gas Cross-over through the Membrane on Water Management in the Cathode and Anode Sides of PEM Fuel Cell [Volume 11, Issue 4, 2018, Pages 861-875]
  • Khan, S. A. Study of Effect of Flow Parameters on Base Pressure in a Suddenly Expanded Duct at Supersonic Mach Number Regimes using CFD and Design of Experiments [Volume 11, Issue 2, 2018, Pages 483-496]
  • Khezzar, L. Effect of Solvent Contribution on Thermally Developing Flow of FENE-P Fluids between Parallel Plates [Volume 11, Issue 1, 2018, Pages 1-9]
  • Khushnood, S. Effect of Fin Geometry on Flow-Induced Vibration Response of a Finned Tube in a Tube Bundle [Volume 11, Issue 4, 2018, Pages 1143-1152]
  • Kiani Moqadam, A. A Novel Method (T-Junction with a Tilted Slat) for Controlling Breakup Volume Ratio of Droplets in Micro and Nanofluidic T-Junctions [Volume 11, Issue 5, 2018, Pages 1255-1265]
  • Kirkkopru, K. Characterization of Disturbed Hemodynamics due to Stenosed Aortic Jets with a Lagrangian Coherent Structures Technique [Volume 11, Issue 2, 2018, Pages 375-384]
  • Kishore Kumar, J. Investigation of Performance and Emission Characteristics of Diesel Blends with Pine Oil [Volume 11, (Special Issue), 2018, Pages 63-67]
  • Knani, M. A. Characterization of Vortex Development and Thermo-Solutal Transfers on Confined Wall Jets Submitted to Suction or Blowing: Part 2 [Volume 11, Issue 1, 2018, Pages 191-204]
  • Koç, Y. Design of a Mini Double-Discharge Centrifugal Pump under Multiphase Flow by CFD and Experimental Verification [Volume 11, Issue 5, 2018, Pages 1437-1448]
  • Kolsi, L. CFD Investigation on the Steady Interaction between an Offset Jet and an Oblique Wall Jet [Volume 11, Issue 4, 2018, Pages 885-894]
  • Kori, J. Numerical Simulation of Mucus Clearance inside Lung Airways [Volume 11, Issue 5, 2018, Pages 1163-1171]
  • Krink, N. One-Dimensional Mathematical Model for Solar Drying of Beds of Sludge [Volume 11, Issue 5, 2018, Pages 1407-1419]
  • Krishna Kumari. P, S. V. H. N. A Study on the Effect of Peristalsis and Cilia of MHD Micropolar Fluid Flow through an Inclined Porous Channel [Volume 11, Issue 5, 2018, Pages 1321-1331]
  • Kumar, P. Numerical Investigations on Unsteady Flow past Two Identical Inline Square Cylinders Oscillating Transversely with Phase Difference [Volume 11, Issue 4, 2018, Pages 847-859]
  • Kumar, S. Determination of Pressure Drop Characteristics of Fly Ash Suspension with Additive for Hydraulic Transportation [Volume 11, Issue 5, 2018, Pages 1387-1393]
  • Kumari, S. Stability of Vertical Throughflow of a Power Law Fluid in Double Diffusive Convection in a Porous Channel [Volume 11, Issue 2, 2018, Pages 497-505]
  • Kumar Satpathi, D. Self-Similar Motion of Strong Converging Cylindrical and Spherical Shock Waves in Non-Ideal Stellar Medium [Volume 11, Issue 6, 2018, Pages 1717-1726]
  • Kunal, D. Studies on Droplet Size Distribution of Oil-in-Water Emulsion in SMX Static Mixer [Volume 11, Issue 1, 2018, Pages 107-114]
  • Kundu, B. Existence of Subsonic Flow in Divergent Section Adjacent to Throat of a Convergent-Divergent Nozzle for Actual Flow [Volume 11, Issue 2, 2018, Pages 353-359]

L

  • Labsi, N. Comparative Study of Reversal Flow during the Evaporation or Condensation of Water and Ethanol Film in a Vertical Channel [Volume 11, Issue 5, 2018, Pages 1421-1426]
  • Lakhlifi, Y. Dam-Break Computations by a Dynamical Adaptive Finite Volume Method [Volume 11, Issue 6, 2018, Pages 1543-1556]
  • Lakshmanan, P. Analysis of Varying Geometri Structures of Fins using Radiators [Volume 11, (Special Issue), 2018, Pages 115-119]
  • Lakshmipathy, S. Evaluation of Partially Averaged Navier-Stokes Method in Simulating Flow Past a Sphere [Volume 11, Issue 5, 2018, Pages 1333-1348]
  • Lang, J. Numerical Investigations into the Origin of Tip Unsteadiness in a Transonic Compressor [Volume 11, Issue 4, 2018, Pages 1133-1141]
  • Larbi, S. Lubricant Rheological Behavior Effect Analysis on the Performance of Finite Porous Self- Lubricating Journal Bearings [Volume 11, Issue 6, 2018, Pages 1557-1568]
  • Lee, K. S. Existence of Subsonic Flow in Divergent Section Adjacent to Throat of a Convergent-Divergent Nozzle for Actual Flow [Volume 11, Issue 2, 2018, Pages 353-359]
  • Lee, S. K. Experimental Investigation and Numerical Simulation of Morphological Changes in Natural Channel Bend [Volume 11, Issue 3, 2018, Pages 721-731]
  • Lei, J. L. Steady-State Experiment and Simulation of Intake Ports in a Four-Valve Direct Injection Diesel Engine [Volume 11, Issue 1, 2018, Pages 217-224]
  • Li, J. Swirl Characteristics of Vortex Valve Variable-Thrust Solid Rocket Motor [Volume 11, Issue 1, 2018, Pages 205-215]
  • Li, K. Numerical Investigation on Temperature and Flow Characteristics of a Tornado-Like Vortex by using Large-Eddy Simulation [Volume 11, Issue 3, 2018, Pages 585-595]
  • Li, Q. Effects of Reinjection on Flow Field of Open Jet Automotive Wind Tunnel Test Section [Volume 11, Issue 1, 2018, Pages 43-53]
  • Li, W. CFD Study on Jet Stirred Oxidation Pond of Absorption Tower in Power Plant [Volume 11, Issue 1, 2018, Pages 233-240]
  • Li, X. Flow Simulation of Various Riblet Shapes and a Uniform Model for Boundary Layer [Volume 11, Issue 3, 2018, Pages 755-764]
  • Li, Y. C. Effect of Turbulent Uniform Flow past a Two- Dimensional Square Cylinder [Volume 11, Issue 5, 2018, Pages 1185-1192]
  • Li, Y. F. Micro-Vibration Analysis and Optimization of Aerostatic Bearing with Pocketed Orifice-Type Restrictor [Volume 11, Issue 4, 2018, Pages 1115-1124]
  • Li, Y. P. Geometrical Optimization of an Inducer with Respect to Rotating Cavitation Generated Radial Forces by using an Orthogonal Experiment [Volume 11, Issue 6, 2018, Pages 1591-1598]
  • Li, Z. Investigation on Flow Characteristics of SVC Nozzles [Volume 11, Issue 2, 2018, Pages 331-342]
  • Lichota, P. 2-D CFD Computations of the Two-Bladed Darrieus-Type Wind Turbine [Volume 11, Issue 4, 2018, Pages 835-845]
  • Lim, J. S. Experimental Study on the Effects of Water-in-oil Emulsions to Wall Shear Stress in the Pipeline Flow [Volume 11, Issue 5, 2018, Pages 1309-1319]
  • Liu, B. Control of Tip Leakage Flow in Axial Flow Compressor Cascade by Suction on the Blade Tip [Volume 11, Issue 1, 2018, Pages 137-149]
  • Liu, B. Numerical and Experimental Study of Separation Control by Boundary Layer Aspiration in a Highly-Loaded Axial Compressor Cascade [Volume 11, Issue 2, 2018, Pages 433-446]
  • Liu, L. Effect of Viscous Gas on Stability of the Electrified Liquid Sheet [Volume 11, Issue 5, 2018, Pages 1173-1183]
  • Liu, P. Numerical Analysis of the Effects of Riblets on Drag Reduction of a Flat Plate [Volume 11, Issue 3, 2018, Pages 679-688]
  • Liu, P. Q. Effect of Pitch Angle and Reynolds Number on Aerodynamic Characteristics of a Small Horizontal Axis Wind Rotor [Volume 11, Issue 3, 2018, Pages 613-620]
  • Liu, S. Geometrical Optimization of an Inducer with Respect to Rotating Cavitation Generated Radial Forces by using an Orthogonal Experiment [Volume 11, Issue 6, 2018, Pages 1591-1598]
  • Liu, X. E. Micro-Vibration Analysis and Optimization of Aerostatic Bearing with Pocketed Orifice-Type Restrictor [Volume 11, Issue 4, 2018, Pages 1115-1124]
  • Liu, Y. Effect of Viscous Gas on Stability of the Electrified Liquid Sheet [Volume 11, Issue 5, 2018, Pages 1173-1183]
  • López, D. Smoothed Particle Hydrodynamics Method for Three-Dimensional Open Channel Flow Simulations [Volume 11, Issue 6, 2018, Pages 1599-1611]
  • Lv, L. Experimental and CFD Study of Internal Flow inside a Sessile Microdroplet undergoing Lateral Vibration [Volume 11, Issue 5, 2018, Pages 1247-1253]

M

  • M, Muruganandam Performance Evaluation of Internal Combustion Engine by using MWCNT/Water Based Nanofluid as a Coolant [Volume 11, (Special Issue), 2018, Pages 15-21]
  • Mahalingam, A. Effect of Stenosis Severity on Wall Shear Stress Based Hemodynamic Descriptors using Multiphase Mixture Theory [Volume 11, Issue 6, 2018, Pages 1497-1509]
  • Mahmoodi, S. A Similarity Solution with Two-Equation Turbulence Model for Computation of Turbulent Film Condensation on a Vertical Surface [Volume 11, Issue 3, 2018, Pages 637-645]
  • Mahpeykar, M. R. The Effects of Target Plate Roughness on the Parameters of Circular Hydraulic Jumps: An Experimental Investigation [Volume 11, Issue 6, 2018, Pages 1691-1701]
  • Malek Jafarian, M. Improvement of Compressible Vorticity Confinement Method by Combining It with Vortex Feature Detection Methods [Volume 11, Issue 5, 2018, Pages 1395-1406]
  • Malik, A. Performance Enhancement of Centrifugal Compressor with Addition of Splitter Blade Close to Pressure Surface [Volume 11, Issue 4, 2018, Pages 919-928]
  • Malki, M. Lubricant Rheological Behavior Effect Analysis on the Performance of Finite Porous Self- Lubricating Journal Bearings [Volume 11, Issue 6, 2018, Pages 1557-1568]
  • Mandal, B. N. Wave Motion due to a Ring Source in Two Superposed Fluids Covered by a Thin Elastic Plate [Volume 11, Issue 4, 2018, Pages 1047-1057]
  • Mangal, S. Characterization of Magnetorheological Finishing Fluid for Continuous Flow Finishing Process [Volume 11, Issue 6, 2018, Pages 1751-1763]
  • Mao, X. Control of Tip Leakage Flow in Axial Flow Compressor Cascade by Suction on the Blade Tip [Volume 11, Issue 1, 2018, Pages 137-149]
  • Mao, X. Numerical and Experimental Study of Separation Control by Boundary Layer Aspiration in a Highly-Loaded Axial Compressor Cascade [Volume 11, Issue 2, 2018, Pages 433-446]
  • Maqsood, A. Design Optimization of Ceiling Fan Blades with Nonlinear Sweep Profile [Volume 11, Issue 5, 2018, Pages 1153-1162]
  • Marivela, R. Smoothed Particle Hydrodynamics Method for Three-Dimensional Open Channel Flow Simulations [Volume 11, Issue 6, 2018, Pages 1599-1611]
  • Marzouk, S. CFD Investigation on the Steady Interaction between an Offset Jet and an Oblique Wall Jet [Volume 11, Issue 4, 2018, Pages 885-894]
  • Masson, C. Numerical Investigation of Turbulent Flow around a Recent Horizontal Axis Wind Turbine using Low and High Reynolds Models [Volume 11, Issue 1, 2018, Pages 151-164]
  • Masson, C. Effect of Grid Topology on Numerical Simulations of Flow Fields around Wind Turbine Nacelle Anemometer [Volume 11, Issue 6, 2018, Pages 1569-1578]
  • Masud, J. Comparison of Flow Field Simulation of Liquid Ejector Pump using Standard K-ε and Embedded LES Turbulence Modelling Techniques [Volume 11, Issue 2, 2018, Pages 385-395]
  • Masud, J. Computational Analysis of Integrated Engine Exhaust Nozzle on a Supersonic Fighter Aircraft [Volume 11, Issue 6, 2018, Pages 1511-1520]
  • Mataoui, A. Numerical Visualization of Plunging Water Jet using Volume of Fluid Model [Volume 11, Issue 1, 2018, Pages 95-105]
  • Matías, A. Electroosmotic Pumping Between Two Immiscible Electrical Conducting Fluids Controlled by Interfacial Phenomena [Volume 11, Issue 3, 2018, Pages 667-678]
  • Méndez, F. Electroosmotic Pumping Between Two Immiscible Electrical Conducting Fluids Controlled by Interfacial Phenomena [Volume 11, Issue 3, 2018, Pages 667-678]
  • Mehta, R. C. An Investigation of Air Flow and Thermal Comfort of Modified Conventional Car Cabin Using Computerized Fluid Dynamics [Volume 11, (Special Issue), 2018, Pages 141-150]
  • Mejri, S. Characterization of Vortex Development and Thermo-Solutal Transfers on Confined Wall Jets Submitted to Suction or Blowing: Part 2 [Volume 11, Issue 1, 2018, Pages 191-204]
  • Melwyn, G. O. Studies on Droplet Size Distribution of Oil-in-Water Emulsion in SMX Static Mixer [Volume 11, Issue 1, 2018, Pages 107-114]
  • Memon, K. N. Exact Solution of Unsteady Tank Drainage for Ellis Fluid [Volume 11, Issue 6, 2018, Pages 1629-1636]
  • Mhiri, H. Shielding Gas Coaxial Jet Pipes Numerical Study of a Vertical Laser Welding Process of AZ91 Magnesium Alloy [Volume 11, Issue 1, 2018, Pages 79-94]
  • Mirasso, A. E. Scale-Adaptive Simulation of Flow around a Circular Cylinder near a Plane Boundary [Volume 11, Issue 6, 2018, Pages 1477-1488]
  • Mirzaei, M. Experimental Investigation of Flow Control over an Ahmed Body using DBD Plasma Actuator [Volume 11, Issue 5, 2018, Pages 1267-1276]
  • Mishra, V. Drag Experienced by a Composite Sphere in an Axisymmetric Creeping Flow of Micropolar Fluid [Volume 11, Issue 4, 2018, Pages 995-1004]
  • Mithun, M. G. Numerical Investigations on Unsteady Flow past Two Identical Inline Square Cylinders Oscillating Transversely with Phase Difference [Volume 11, Issue 4, 2018, Pages 847-859]
  • Mo, J. Micro-Vibration Analysis and Optimization of Aerostatic Bearing with Pocketed Orifice-Type Restrictor [Volume 11, Issue 4, 2018, Pages 1115-1124]
  • Moaveni, A. Optimization of an Active Electrokinetic Micromixer Based on the Number and Arrangement of Microelectrodes [Volume 11, Issue 6, 2018, Pages 1531-1541]
  • Moghimi, P. Numerical and Experimental Investigations on Aerodynamic Behavior of the Ahmed Body Model with Different Diffuser Angles [Volume 11, Issue 4, 2018, Pages 1101-1113]
  • Mohammadpourfard, M. Experimental Study of Subcooled Boiling Heat Transfer of Axial and Swirling Flows inside Mini Annular Gaps [Volume 11, Issue 1, 2018, Pages 225-232]
  • Mohammadzadeh, K. Effects of Gas Cross-over through the Membrane on Water Management in the Cathode and Anode Sides of PEM Fuel Cell [Volume 11, Issue 4, 2018, Pages 861-875]
  • Mohanamurugan, S. Experimental Investigation on Linde-Hampson Refrigerating System Operating with Different Blends of Hydro-Carbons as Alternate Refrigerants [Volume 11, (Special Issue), 2018, Pages 53-61]
  • Mohanavel, V. IWF Based Optimization of Porous Insert Configurations for Heat Transfer Enhancement Using CFD [Volume 11, (Special Issue), 2018, Pages 31-37]
  • Mohebbi, M. The Impact of Air Fences Geometry on Air Flow around an ICE3 High Speed Train on a Double Line Railway Track with Exposure to Crosswinds [Volume 11, Issue 3, 2018, Pages 743-754]
  • Mohseni, M. Improvement of Compressible Vorticity Confinement Method by Combining It with Vortex Feature Detection Methods [Volume 11, Issue 5, 2018, Pages 1395-1406]
  • Mollajan, M. A Thoroughgoing Design of a Rapid-cycle Microfluidic Droplet-based PCR Device to Amplify Rare DNA Strands [Volume 11, Issue 1, 2018, Pages 21-29]
  • Mostafapour, K. The Effects of the Reynolds Number on the Hydrodynamics Characteristics of an AUV [Volume 11, Issue 2, 2018, Pages 343-352]
  • Mothilal, T. CFD and Statistical Approach for Optimization of Operating Parameters in a Tangential Cyclone Heat Exchanger [Volume 11, Issue 2, 2018, Pages 459-466]
  • Moura, A. F. One-Dimensional Mathematical Model for Solar Drying of Beds of Sludge [Volume 11, Issue 5, 2018, Pages 1407-1419]
  • Mousavi Nainiyan, S. M. Experimental Investigation of Flow Control over an Ahmed Body using DBD Plasma Actuator [Volume 11, Issue 5, 2018, Pages 1267-1276]
  • Mubashar, A. Simulation of a Standard Store Separated from Generic Wing [Volume 11, Issue 6, 2018, Pages 1579-1589]
  • Mukesh Kumar, P. C. A Comparison between MLP and SVR Models in Prediction of Thermal Properties of Nano Fluids [Volume 11, (Special Issue), 2018, Pages 7-14]
  • Mukesh Kumar, P. C. Performance Evaluation of Internal Combustion Engine by using MWCNT/Water Based Nanofluid as a Coolant [Volume 11, (Special Issue), 2018, Pages 15-21]
  • Mukesh Kumar, P. C. Experimental Investigation on Heat Transfer and Pressure Drop in Double Helically Coiled Tube Heat Exchanger with MWCNT/Water Nanofluid [Volume 11, (Special Issue), 2018, Pages 23-29]
  • Mukesh Kumar, P. C. Influence of Aspect Ratio on Thermal Performance of Heat Sink using Ansys [Volume 11, (Special Issue), 2018, Pages 45-52]
  • Munir, S. Effect of Boost Pressure on the In-Cylinder Tumble-Motion of GDI Engine under Steady-State Conditions using Stereoscopic-PIV [Volume 11, Issue 3, 2018, Pages 733-742]
  • Murthy, P. V. S. N. Stability of Vertical Throughflow of a Power Law Fluid in Double Diffusive Convection in a Porous Channel [Volume 11, Issue 2, 2018, Pages 497-505]
  • Murugan, P. Experimental Investigation on Linde-Hampson Refrigerating System Operating with Different Blends of Hydro-Carbons as Alternate Refrigerants [Volume 11, (Special Issue), 2018, Pages 53-61]
  • Murugan, T. Numerical Visualization of Blast Wave Interacting with Objects [Volume 11, Issue 5, 2018, Pages 1201-1206]
  • Muruganandam, L. Studies on Droplet Size Distribution of Oil-in-Water Emulsion in SMX Static Mixer [Volume 11, Issue 1, 2018, Pages 107-114]
  • Murugesan, K. Numerical Study of Vorticity and Heat Flow in Bottom Heated DDC Systems at Nominal Rayleigh Number [Volume 11, Issue 2, 2018, Pages 309-322]
  • Muthukumarasamy, S. Performance and Emission Characteristics of Biodiesel-Butanol Blended Fuel in Lhr Engine [Volume 11, (Special Issue), 2018, Pages 1-5]
  • Muthulakshmanan, A. Modelling of Manhattan K-Nearest Neighbor for Exhaust Emission Analysis of CNG-Diesel Engine [Volume 11, (Special Issue), 2018, Pages 39-44]

N

  • Naffouti, A. Optimization of Convective Heat Transfer from Two Heating Generators into Horizontal Enclosure Including A Discrete Obstacle: A Lattice Boltzmann Comprehensive Investigation [Volume 11, Issue 5, 2018, Pages 1277-1286]
  • Naffouti, T. Optimization of Convective Heat Transfer from Two Heating Generators into Horizontal Enclosure Including A Discrete Obstacle: A Lattice Boltzmann Comprehensive Investigation [Volume 11, Issue 5, 2018, Pages 1277-1286]
  • Najib Bin Abdul Hamid, M. Particle Image Velocimetry and Finite Volume Method Study of Bi-leaflet Artificial Heart Valve [Volume 11, Issue 5, 2018, Pages 1365-1375]
  • Najim, M. Comparative Study of Reversal Flow during the Evaporation or Condensation of Water and Ethanol Film in a Vertical Channel [Volume 11, Issue 5, 2018, Pages 1421-1426]
  • Nallusamy, N. Experimental Investigation on Linde-Hampson Refrigerating System Operating with Different Blends of Hydro-Carbons as Alternate Refrigerants [Volume 11, (Special Issue), 2018, Pages 53-61]
  • Narsimhulu, D. Self-Similar Motion of Strong Converging Cylindrical and Spherical Shock Waves in Non-Ideal Stellar Medium [Volume 11, Issue 6, 2018, Pages 1717-1726]
  • Nasr, M. Computational and Experimental Study on the Water-Jet Pump Performance [Volume 11, Issue 4, 2018, Pages 1013-1020]
  • Navaneetha Krishnan, P. Experimental Heat Transfer Analysis on Heat Pipe using Sio2 and Tio2 Nano Fluid [Volume 11, (Special Issue), 2018, Pages 91-101]
  • Nemouchi, Z. Effect of Solvent Contribution on Thermally Developing Flow of FENE-P Fluids between Parallel Plates [Volume 11, Issue 1, 2018, Pages 1-9]
  • Nishibe, K. Influence of Stroke on Performance Characteristics of Synthetic Jet Fan [Volume 11, Issue 4, 2018, Pages 945-956]
  • Noda, K. Influence of Stroke on Performance Characteristics of Synthetic Jet Fan [Volume 11, Issue 4, 2018, Pages 945-956]
  • Nomura, Y. Influence of Stroke on Performance Characteristics of Synthetic Jet Fan [Volume 11, Issue 4, 2018, Pages 945-956]
  • Nouraeidanesh, P. An Innovative Roof Shape in Liquid Storage Tanks to Reduce Dynamic Sloshing Effects [Volume 11, Issue 1, 2018, Pages 127-136]
  • Nouri, N. M. The Effects of the Reynolds Number on the Hydrodynamics Characteristics of an AUV [Volume 11, Issue 2, 2018, Pages 343-352]
  • Nowruzi, H. On the Instability of Two Dimensional Backward-Facing Step Flow using Energy Gradient Method [Volume 11, Issue 1, 2018, Pages 241-256]
  • Nowruzi, H. Two Semi-Analytical Methods Applied to Hydrodynamic Stability of Dean Flow [Volume 11, Issue 5, 2018, Pages 1427-1435]

O

  • Ohue, H. Influence of Stroke on Performance Characteristics of Synthetic Jet Fan [Volume 11, Issue 4, 2018, Pages 945-956]
  • Olcay, A. B. Characterization of Disturbed Hemodynamics due to Stenosed Aortic Jets with a Lagrangian Coherent Structures Technique [Volume 11, Issue 2, 2018, Pages 375-384]
  • Olsen, J. Combined Methods in Preliminary Micro Scale Gas Turbine Diffuser Design – a Practical Approach [Volume 11, Issue 3, 2018, Pages 567-575]
  • Osei, H. An Optical Flow Measurement Technique based on Continuous Wavelet Transform [Volume 11, Issue 3, 2018, Pages 695-707]
  • Osman, A. B An Optical Flow Measurement Technique based on Continuous Wavelet Transform [Volume 11, Issue 3, 2018, Pages 695-707]
  • Ostad, M. Evaluating the Effects of Blade Tip Clearance in Various Stages on the Performance of an Axial Compressor [Volume 11, Issue 2, 2018, Pages 475-481]
  • Oualli, H. Energy Extraction Performance Improvement of a Flapping Foil by the Use of Combined Foil [Volume 11, Issue 6, 2018, Pages 1651-1663]
  • Oubella, M. Comparative Study of Reversal Flow during the Evaporation or Condensation of Water and Ethanol Film in a Vertical Channel [Volume 11, Issue 5, 2018, Pages 1421-1426]
  • Ovinis, M. An Optical Flow Measurement Technique based on Continuous Wavelet Transform [Volume 11, Issue 3, 2018, Pages 695-707]

P

  • Pan, X. Numerical Study on the Smoke Flow Characterization and Phenomenon of Plug-Holing under Lateral Smoke Exhaust in Tunnel Fire [Volume 11, Issue 1, 2018, Pages 115-126]
  • Pant, T. An Empirical Model Relating Pressure Drop and Mass Flow Rate in General Internal Flows: Theoretical Basis and Sensitivity Analysis [Volume 11, Issue 2, 2018, Pages 419-432]
  • Parameswaran, P. Experimental Heat Transfer Analysis on Heat Pipe using Sio2 and Tio2 Nano Fluid [Volume 11, (Special Issue), 2018, Pages 91-101]
  • Parammasivam, K. M. Reduction of Aerodynamic Drag Force for Reducing Fuel Consumption in Road Vehicle using Basebleed [Volume 11, Issue 6, 2018, Pages 1489-1495]
  • Parlak, Z. Design of a Mini Double-Discharge Centrifugal Pump under Multiphase Flow by CFD and Experimental Verification [Volume 11, Issue 5, 2018, Pages 1437-1448]
  • Parthiban, K. CFD and Statistical Approach for Optimization of Operating Parameters in a Tangential Cyclone Heat Exchanger [Volume 11, Issue 2, 2018, Pages 459-466]
  • Pary Abarghooei, H. Simulating Fluid and Structure Interaction using Exponential Basis Functions [Volume 11, Issue 3, 2018, Pages 787-799]
  • Patel, R. M. Ferrofluid Based Squeeze Film Lubrication between Rough Stepped Plates with Couple Stress Effect [Volume 11, Issue 3, 2018, Pages 597-612]
  • Paul, S. Transport of Reactive Species in Oscillatory Annular Flow [Volume 11, Issue 2, 2018, Pages 405-417]
  • Pereira, F. P. S. One-Dimensional Mathematical Model for Solar Drying of Beds of Sludge [Volume 11, Issue 5, 2018, Pages 1407-1419]
  • Pitchandi, K. CFD and Statistical Approach for Optimization of Operating Parameters in a Tangential Cyclone Heat Exchanger [Volume 11, Issue 2, 2018, Pages 459-466]
  • Pouryoussefi, S. G. Experimental Investigation of Flow Control over an Ahmed Body using DBD Plasma Actuator [Volume 11, Issue 5, 2018, Pages 1267-1276]
  • Pradeep Mohan Kumar, K. Computational Analysis and Optimization of Spiral Plate Heat Exchanger [Volume 11, (Special Issue), 2018, Pages 121-128]
  • Pratibha, . Numerical Simulation of Mucus Clearance inside Lung Airways [Volume 11, Issue 5, 2018, Pages 1163-1171]
  • Próchniak, W. A Simple Method for the Estimation of the Axial Dispersion Coefficient in Gas Flow [Volume 11, Issue 4, 2018, Pages 965-970]
  • Puvaneswari, P. A Dramatic Enhancement of Heat Transfer in Dream Pipe with Viscoelastic Fluids [Volume 11, Issue 3, 2018, Pages 621-635]

Q

  • Qi, H. Y. Numerical Investigation on Temperature and Flow Characteristics of a Tornado-Like Vortex by using Large-Eddy Simulation [Volume 11, Issue 3, 2018, Pages 585-595]
  • Quadros, J. D. Study of Effect of Flow Parameters on Base Pressure in a Suddenly Expanded Duct at Supersonic Mach Number Regimes using CFD and Design of Experiments [Volume 11, Issue 2, 2018, Pages 483-496]
  • Quevedo Tiznado, Q. A. Snap-Off Criteria for Dynamic Flow Conditions in Constricted Circular Capillaries [Volume 11, Issue 2, 2018, Pages 447-457]
  • Qun, Z. Performance Enhancement of Centrifugal Compressor with Addition of Splitter Blade Close to Pressure Surface [Volume 11, Issue 4, 2018, Pages 919-928]
  • Qureshi, F. Comparative Flow Field Analysis of Boundary Layer Diverter Intake and Diverterless Supersonic Intake Configuration [Volume 11, Issue 4, 2018, Pages 1125-1131]

R

  • Rafee, R. Numerical and Experimental Investigations on Aerodynamic Behavior of the Ahmed Body Model with Different Diffuser Angles [Volume 11, Issue 4, 2018, Pages 1101-1113]
  • Raja, K. Optimization and Biodiesel Production from Prosopis Julifera Oil with High Free Fatty Acids [Volume 11, Issue 1, 2018, Pages 257-270]
  • Rajaguru, K. Experimental Investigation of the Effect of Compression Ratio in a Direct Injection Diesel Engine Fueled with Spirulina Algae Biodiesel [Volume 11, (Special Issue), 2018, Pages 107-114]
  • Rajeshwaran, M. Optimization and Biodiesel Production from Prosopis Julifera Oil with High Free Fatty Acids [Volume 11, Issue 1, 2018, Pages 257-270]
  • Rameshkumar, C. Co-Combustion Analysis of Lignite Coal and Groundnut Shell using TGA [Volume 11, (Special Issue), 2018, Pages 75-78]
  • Ramian, P. Lattice Boltzmann Numerical Investigation of Inner Cylindrical Pin-fins Configuration on Nanofluid Natural Convective Heat Transfer in Porous Enclosure [Volume 11, Issue 3, 2018, Pages 801-816]
  • Ramkumar, R. Experimental Heat Transfer Analysis on Heat Pipe using Sio2 and Tio2 Nano Fluid [Volume 11, (Special Issue), 2018, Pages 91-101]
  • Ramos, T. Smoothed Particle Hydrodynamics Method for Three-Dimensional Open Channel Flow Simulations [Volume 11, Issue 6, 2018, Pages 1599-1611]
  • Ramu, A. Self-Similar Motion of Strong Converging Cylindrical and Spherical Shock Waves in Non-Ideal Stellar Medium [Volume 11, Issue 6, 2018, Pages 1717-1726]
  • Ranjithkumar, M. Analysis of Varying Geometri Structures of Fins using Radiators [Volume 11, (Special Issue), 2018, Pages 115-119]
  • Rasekh, S. Accuracy of Dynamic Stall Response for Wind Turbine Airfoils Based On Semi-Empirical and Numerical Methods [Volume 11, Issue 5, 2018, Pages 1287-1296]
  • Rashidi, M. M. Effects of Reinjection on Flow Field of Open Jet Automotive Wind Tunnel Test Section [Volume 11, Issue 1, 2018, Pages 43-53]
  • Ravi Kumar, Y. V. K. A Study on the Effect of Peristalsis and Cilia of MHD Micropolar Fluid Flow through an Inclined Porous Channel [Volume 11, Issue 5, 2018, Pages 1321-1331]
  • Razak, N. Particle Image Velocimetry and Finite Volume Method Study of Bi-leaflet Artificial Heart Valve [Volume 11, Issue 5, 2018, Pages 1365-1375]
  • Razavi, S. E. Numerical Study on the Effect of an Annulus Injector on the Hydrodynamic Behavior of a Spray [Volume 11, Issue 4, 2018, Pages 983-994]
  • Razavi Bazaz, S. A Thoroughgoing Design of a Rapid-cycle Microfluidic Droplet-based PCR Device to Amplify Rare DNA Strands [Volume 11, Issue 1, 2018, Pages 21-29]
  • Rebollo, J. J. Smoothed Particle Hydrodynamics Method for Three-Dimensional Open Channel Flow Simulations [Volume 11, Issue 6, 2018, Pages 1599-1611]
  • Reddy, N. Numerical Study of Vorticity and Heat Flow in Bottom Heated DDC Systems at Nominal Rayleigh Number [Volume 11, Issue 2, 2018, Pages 309-322]
  • Ren, X. Flow Simulation of Various Riblet Shapes and a Uniform Model for Boundary Layer [Volume 11, Issue 3, 2018, Pages 755-764]
  • Ren, X. Coefficient Adaptation Method for the Zwart Model [Volume 11, Issue 6, 2018, Pages 1665-1678]
  • Rezvani, M. A. The Impact of Air Fences Geometry on Air Flow around an ICE3 High Speed Train on a Double Line Railway Track with Exposure to Crosswinds [Volume 11, Issue 3, 2018, Pages 743-754]
  • Ringleb, A. Large Scale Fluctuations in an Axisymmetric Sudden Pipe Expansion with Large Aspect Ratio [Volume 11, Issue 4, 2018, Pages 877-883]
  • Rogowski, K. 2-D CFD Computations of the Two-Bladed Darrieus-Type Wind Turbine [Volume 11, Issue 4, 2018, Pages 835-845]
  • Roudini, M. Experimental Investigation of Spray Characteristics of Pre-filming Air-blast Atomizers [Volume 11, Issue 6, 2018, Pages 1455-1469]
  • Rouhollahi, R. Application of Electric Field to Developing Falling Films using Wire-Plate Electrode Configuration- An Experimental Study [Volume 11, Issue 5, 2018, Pages 1349-1363]
  • Roushangar, K. Effect of Channel Boundary Conditions in Predicting Hydraulic Jump Characteristics using an ANFIS-Based Approach [Volume 11, Issue 3, 2018, Pages 555-565]
  • Roy, A. K. Transport of Reactive Species in Oscillatory Annular Flow [Volume 11, Issue 2, 2018, Pages 405-417]
  • Rtibi, A. On the Optimization of the Species Separation in an Inclined Darcy-Brinkman Porous Cavity under the Effect of an External Magnetic Field [Volume 11, Issue 4, 2018, Pages 1059-1071]

S

  • Sánchez, P. Smoothed Particle Hydrodynamics Method for Three-Dimensional Open Channel Flow Simulations [Volume 11, Issue 6, 2018, Pages 1599-1611]
  • Sadhasivam, C. Experimental Measurement and Computational Investigation on the Effect of Inlet Winglet Turbulators on the Heat Exchange Behaviour of Radiator Tubes [Volume 11, (Special Issue), 2018, Pages 135-139]
  • Safarzadeh, H. Experimental Study of Subcooled Boiling Heat Transfer of Axial and Swirling Flows inside Mini Annular Gaps [Volume 11, Issue 1, 2018, Pages 225-232]
  • Saglam, M. Natural Convection in an Enclosure with a Discretely Heated Sidewall: Heatlines and Flow Visualization [Volume 11, Issue 1, 2018, Pages 271-284]
  • Sai Darshan, A. Complex Behavior of Polymers as Drag Reducing Agents Through Pipe Fittings [Volume 11, Issue 2, 2018, Pages 467-474]
  • Saini, S. A Bio-Thermal Convection in Water-Based Nanofluid Containing Gyrotactic Microorganisms: Effect of Vertical Throughflow [Volume 11, Issue 4, 2018, Pages 895-903]
  • Sajedi, S.M. Statistical Analysis of Wedge Effect on the Seakeeping of a Planing Hull in Irregular Waves at the Onset of the Planing Region [Volume 11, Issue 4, 2018, Pages 905-918]
  • Sakthivel, C. Co-Combustion Analysis of Lignite Coal and Groundnut Shell using TGA [Volume 11, (Special Issue), 2018, Pages 75-78]
  • Sakthivel, P. Experimental Heat Transfer Analysis on Heat Pipe using Sio2 and Tio2 Nano Fluid [Volume 11, (Special Issue), 2018, Pages 91-101]
  • Salamat, S. Comparative Flow Field Analysis of Boundary Layer Diverter Intake and Diverterless Supersonic Intake Configuration [Volume 11, Issue 4, 2018, Pages 1125-1131]
  • Salman Nourazar, S. On the Instability of Two Dimensional Backward-Facing Step Flow using Energy Gradient Method [Volume 11, Issue 1, 2018, Pages 241-256]
  • Salman Nourazar, S. On the Expedient Solution of the Boltzmann Equation by Modified Time Relaxed Monte Carlo (MTRMC) Method [Volume 11, Issue 3, 2018, Pages 655-666]
  • Salman Nourazar, S. Two Semi-Analytical Methods Applied to Hydrodynamic Stability of Dean Flow [Volume 11, Issue 5, 2018, Pages 1427-1435]
  • Saranjam, B. Experimental and Numerical Study of a Submarine and Propeller Behaviors in Submergence and Surface Conditions [Volume 11, Issue 5, 2018, Pages 1297-1308]
  • Saranjam, B. A Study on the Motion of High Speed Supercavitating Projectiles [Volume 11, Issue 6, 2018, Pages 1727-1738]
  • Saravanan, K. Experimental Investigation of the Effect of Compression Ratio in a Direct Injection Diesel Engine Fueled with Spirulina Algae Biodiesel [Volume 11, (Special Issue), 2018, Pages 107-114]
  • Saravanan, M. Potential Flow Simulation through Lagrangian Interpolation Meshless Method Coding [Volume 11, (Special Issue), 2018, Pages 129-134]
  • Saroha, S. Evaluation of Partially Averaged Navier-Stokes Method in Simulating Flow Past a Sphere [Volume 11, Issue 5, 2018, Pages 1333-1348]
  • Saroj Vernekar, D. A Study on the Effect of Peristalsis and Cilia of MHD Micropolar Fluid Flow through an Inclined Porous Channel [Volume 11, Issue 5, 2018, Pages 1321-1331]
  • Sarper, B. Natural Convection in an Enclosure with a Discretely Heated Sidewall: Heatlines and Flow Visualization [Volume 11, Issue 1, 2018, Pages 271-284]
  • Sathish, T. IWF Based Optimization of Porous Insert Configurations for Heat Transfer Enhancement Using CFD [Volume 11, (Special Issue), 2018, Pages 31-37]
  • Sathish, T. Modelling of Manhattan K-Nearest Neighbor for Exhaust Emission Analysis of CNG-Diesel Engine [Volume 11, (Special Issue), 2018, Pages 39-44]
  • Sathishkumar, P. Investigation of Performance and Emission Characteristics of Diesel Blends with Pine Oil [Volume 11, (Special Issue), 2018, Pages 63-67]
  • Sato, K. Influence of Stroke on Performance Characteristics of Synthetic Jet Fan [Volume 11, Issue 4, 2018, Pages 945-956]
  • Schaer, N. On the Determination of the Yield Surface within the Flow of Yield Stress Fluids using Computational Fluid Dynamics [Volume 11, Issue 4, 2018, Pages 971-982]
  • Schlüter, W. Large Scale Fluctuations in an Axisymmetric Sudden Pipe Expansion with Large Aspect Ratio [Volume 11, Issue 4, 2018, Pages 877-883]
  • Seddiq, M. Effects of Gas Cross-over through the Membrane on Water Management in the Cathode and Anode Sides of PEM Fuel Cell [Volume 11, Issue 4, 2018, Pages 861-875]
  • Sekar, S. Experimental Investigation on Linde-Hampson Refrigerating System Operating with Different Blends of Hydro-Carbons as Alternate Refrigerants [Volume 11, (Special Issue), 2018, Pages 53-61]
  • Sellami, K. Comparative Study of Reversal Flow during the Evaporation or Condensation of Water and Ethanol Film in a Vertical Channel [Volume 11, Issue 5, 2018, Pages 1421-1426]
  • Selvakumar, A. An Explicit Approach of Natural Ventilation for Various Orientation of Wind Catcher Openings using CFD [Volume 11, (Special Issue), 2018, Pages 103-105]
  • Senthilkumar, P. Alterations of Cowl Lip for the Improvement of Supersonic-Intake Performance [Volume 11, Issue 1, 2018, Pages 31-41]
  • Senthil Kumar, T. Investigation of Performance and Emission Characters of Compression Ignition Engine Fuelled with Diesel Blends of Linseed and Cottonseed oil [Volume 11, (Special Issue), 2018, Pages 69-74]
  • Shadmani, S. Experimental Investigation of Flow Control over an Ahmed Body using DBD Plasma Actuator [Volume 11, Issue 5, 2018, Pages 1267-1276]
  • Shah, S. Comparative Flow Field Analysis of Boundary Layer Diverter Intake and Diverterless Supersonic Intake Configuration [Volume 11, Issue 4, 2018, Pages 1125-1131]
  • Shah, S. Computational Analysis of Integrated Engine Exhaust Nozzle on a Supersonic Fighter Aircraft [Volume 11, Issue 6, 2018, Pages 1511-1520]
  • Shah, S. F. Exact Solution of Unsteady Tank Drainage for Ellis Fluid [Volume 11, Issue 6, 2018, Pages 1629-1636]
  • Shahmohammadi, A. New Permeability Model for Gel Coated Porous Media with Radial Flow [Volume 11, Issue 2, 2018, Pages 397-404]
  • Shailendhra, K. A Dramatic Enhancement of Heat Transfer in Dream Pipe with Viscoelastic Fluids [Volume 11, Issue 3, 2018, Pages 621-635]
  • Shamshiri, M. Optimization of an Active Electrokinetic Micromixer Based on the Number and Arrangement of Microelectrodes [Volume 11, Issue 6, 2018, Pages 1531-1541]
  • Shankar, G. Experimental and Computational Analysis on Aerodynamic Behavior of a Car Model with Vortex Generators at Different Yaw Angles [Volume 11, Issue 1, 2018, Pages 285-295]
  • Sharma, V. Electrothermal Convection in Dielectric Maxwellian Nanofluid Layer [Volume 11, Issue 3, 2018, Pages 765-777]
  • Sharma, Y. D. A Bio-Thermal Convection in Water-Based Nanofluid Containing Gyrotactic Microorganisms: Effect of Vertical Throughflow [Volume 11, Issue 4, 2018, Pages 895-903]
  • Sheha, A. A. A. Computational and Experimental Study on the Water-Jet Pump Performance [Volume 11, Issue 4, 2018, Pages 1013-1020]
  • Sheharyar, M. Simulation of a Standard Store Separated from Generic Wing [Volume 11, Issue 6, 2018, Pages 1579-1589]
  • Sheikholeslami, M. Preliminary Experimental Investigation on a Low Profile Magneto-Hydrodynamic Propulsive Blanket, Considering Plasma Generation [Volume 11, Issue 4, 2018, Pages 957-963]
  • Shervani-Tabar, M. T. Numerical Study on the Effect of an Annulus Injector on the Hydrodynamic Behavior of a Spray [Volume 11, Issue 4, 2018, Pages 983-994]
  • Shi, C. Rollover Mechanism Methodology of LNG Tank with Gas-Liquid Stratification Based on Curvelet Finite Element Method and Large Eddy Simulation Technology [Volume 11, Issue 3, 2018, Pages 779-786]
  • Shi, J. Investigation on Flow Characteristics of SVC Nozzles [Volume 11, Issue 2, 2018, Pages 331-342]
  • Siddiqui, A. M. Exact Solution of Unsteady Tank Drainage for Ellis Fluid [Volume 11, Issue 6, 2018, Pages 1629-1636]
  • Siddiqui, M. I. Effect of Boost Pressure on the In-Cylinder Tumble-Motion of GDI Engine under Steady-State Conditions using Stereoscopic-PIV [Volume 11, Issue 3, 2018, Pages 733-742]
  • Silva, G. S. One-Dimensional Mathematical Model for Solar Drying of Beds of Sludge [Volume 11, Issue 5, 2018, Pages 1407-1419]
  • Singh, A. K. Linear and Weak Nonlinear Double Diffusive Convection in a Viscoelastic Fluid Saturated Anisotropic Porous Medium with Internal Heat Source [Volume 11, Issue 1, 2018, Pages 65-77]
  • Singh, A. K. Study of Heat and Mass Transport in Bénard-Darcy Convection with G-Jitter and Variable Viscosity Liquids in a Porous Layer with Internal Heat Source [Volume 11, Issue 5, 2018, Pages 1217-1229]
  • Sinha, S. S. Evaluation of Partially Averaged Navier-Stokes Method in Simulating Flow Past a Sphere [Volume 11, Issue 5, 2018, Pages 1333-1348]
  • Siqueira, A. M. O. One-Dimensional Mathematical Model for Solar Drying of Beds of Sludge [Volume 11, Issue 5, 2018, Pages 1407-1419]
  • Sivakumar, V. An Explicit Approach of Natural Ventilation for Various Orientation of Wind Catcher Openings using CFD [Volume 11, (Special Issue), 2018, Pages 103-105]
  • Sivaraj, G. Reduction of Aerodynamic Drag Force for Reducing Fuel Consumption in Road Vehicle using Basebleed [Volume 11, Issue 6, 2018, Pages 1489-1495]
  • Skews, B. Expansion Wave Propagation into a Cavity [Volume 11, Issue 2, 2018, Pages 507-517]
  • Smaili, A. Numerical Investigation of Turbulent Flow around a Recent Horizontal Axis Wind Turbine using Low and High Reynolds Models [Volume 11, Issue 1, 2018, Pages 151-164]
  • Smaili, A. Effect of Grid Topology on Numerical Simulations of Flow Fields around Wind Turbine Nacelle Anemometer [Volume 11, Issue 6, 2018, Pages 1569-1578]
  • Sohn, C. H. Design Optimization of Ceiling Fan Blades with Nonlinear Sweep Profile [Volume 11, Issue 5, 2018, Pages 1153-1162]
  • Sommer, O. Large Scale Fluctuations in an Axisymmetric Sudden Pipe Expansion with Large Aspect Ratio [Volume 11, Issue 4, 2018, Pages 877-883]
  • Sonmez, K. A Performance Analysis on Pressure Loss and Airflow Diffusion in a Chamber with Perforated V-Profile Diffuser Designed for Air Handling Units (AHUs) [Volume 11, Issue 4, 2018, Pages 1089-1100]
  • Soukhtanlou, E. The Effects of Target Plate Roughness on the Parameters of Circular Hydraulic Jumps: An Experimental Investigation [Volume 11, Issue 6, 2018, Pages 1691-1701]
  • Sreedhar, I. Complex Behavior of Polymers as Drag Reducing Agents Through Pipe Fittings [Volume 11, Issue 2, 2018, Pages 467-474]
  • Srivastava, A. Linear and Weak Nonlinear Double Diffusive Convection in a Viscoelastic Fluid Saturated Anisotropic Porous Medium with Internal Heat Source [Volume 11, Issue 1, 2018, Pages 65-77]
  • Srivastava, A. Study of Heat and Mass Transport in Bénard-Darcy Convection with G-Jitter and Variable Viscosity Liquids in a Porous Layer with Internal Heat Source [Volume 11, Issue 5, 2018, Pages 1217-1229]
  • Srivastava, S. Complex Behavior of Polymers as Drag Reducing Agents Through Pipe Fittings [Volume 11, Issue 2, 2018, Pages 467-474]
  • Stendardo, S. Modeling and Simulation of an Oxygen-Blown Bubbling Fluidized Bed Gasifier using the Computational Particle-Fluid Dynamics (CPFD) Approach [Volume 11, Issue 4, 2018, Pages 825-834]
  • Suganya, G. Reduction of Aerodynamic Drag Force for Reducing Fuel Consumption in Road Vehicle using Basebleed [Volume 11, Issue 6, 2018, Pages 1489-1495]
  • Sundara Pandiyan, S. Potential Flow Simulation through Lagrangian Interpolation Meshless Method Coding [Volume 11, (Special Issue), 2018, Pages 129-134]
  • Sundar Raj, C. Investigation of Performance and Emission Characteristics of Diesel Blends with Pine Oil [Volume 11, (Special Issue), 2018, Pages 63-67]
  • Suresh Kumar, B. Co-Combustion Analysis of Lignite Coal and Groundnut Shell using TGA [Volume 11, (Special Issue), 2018, Pages 75-78]
  • Suresh Kumar, B. Computational Analysis and Optimization of Spiral Plate Heat Exchanger [Volume 11, (Special Issue), 2018, Pages 121-128]
  • Szukiewicz, M. A Simple Method for the Estimation of the Axial Dispersion Coefficient in Gas Flow [Volume 11, Issue 4, 2018, Pages 965-970]

T

  • Tabatabaei, N. Investigation of the Numerical Methodology of a Model Wind Turbine Simulation [Volume 11, Issue 3, 2018, Pages 527-544]
  • Tacgun, E. A Performance Analysis on Pressure Loss and Airflow Diffusion in a Chamber with Perforated V-Profile Diffuser Designed for Air Handling Units (AHUs) [Volume 11, Issue 4, 2018, Pages 1089-1100]
  • Tadi Beni, Y. Development of the Couple Stress Relationships for the Power Law Fluid and the Solution of Flow in Ceramic Tape Casting Process [Volume 11, Issue 5, 2018, Pages 1239-1246]
  • Taeibi-Rahni, M. Optimization of Freestream Flow Effects on Thrust Shock Vector Control Nozzle [Volume 11, Issue 2, 2018, Pages 361-374]
  • Taeibi-Rahni, M. Lattice Boltzmann Numerical Investigation of Inner Cylindrical Pin-fins Configuration on Nanofluid Natural Convective Heat Transfer in Porous Enclosure [Volume 11, Issue 3, 2018, Pages 801-816]
  • Taghikhani, P. Statistical Analysis of Wedge Effect on the Seakeeping of a Planing Hull in Irregular Waves at the Onset of the Planing Region [Volume 11, Issue 4, 2018, Pages 905-918]
  • Tahavvor, A. R. Numerical Simulation of Turbulent Airflow and Micro-Particle Deposition in Upper Human Respiratory System [Volume 11, Issue 3, 2018, Pages 577-584]
  • Taleb Ahmed, A. Modeling and Optimization of the Magnetohydrodynamic Conduction Pump by Particle Swarm Method [Volume 11, Issue 3, 2018, Pages 689-694]
  • Tang, T. Control of Tip Leakage Flow in Axial Flow Compressor Cascade by Suction on the Blade Tip [Volume 11, Issue 1, 2018, Pages 137-149]
  • Tang, Y. Coefficient Adaptation Method for the Zwart Model [Volume 11, Issue 6, 2018, Pages 1665-1678]
  • Tata, M. Effect of Grid Topology on Numerical Simulations of Flow Fields around Wind Turbine Nacelle Anemometer [Volume 11, Issue 6, 2018, Pages 1569-1578]
  • Techato, K. Experimental Measurement and Computational Investigation on the Effect of Inlet Winglet Turbulators on the Heat Exchange Behaviour of Radiator Tubes [Volume 11, (Special Issue), 2018, Pages 135-139]
  • Teng, J. Detached Eddy Investigation of Conical Cavity Flow at Mach 0.9 [Volume 11, Issue 1, 2018, Pages 165-176]
  • Teymourtash, A. R. The Effects of Target Plate Roughness on the Parameters of Circular Hydraulic Jumps: An Experimental Investigation [Volume 11, Issue 6, 2018, Pages 1691-1701]
  • Thamri, L. Optimization of Convective Heat Transfer from Two Heating Generators into Horizontal Enclosure Including A Discrete Obstacle: A Lattice Boltzmann Comprehensive Investigation [Volume 11, Issue 5, 2018, Pages 1277-1286]
  • Thaniyarasu, K. Investigation of Performance and Emission Characters of Compression Ignition Engine Fuelled with Diesel Blends of Linseed and Cottonseed oil [Volume 11, (Special Issue), 2018, Pages 69-74]
  • Thirumalai, R. Experimental Measurement and Computational Investigation on the Effect of Inlet Winglet Turbulators on the Heat Exchange Behaviour of Radiator Tubes [Volume 11, (Special Issue), 2018, Pages 135-139]
  • Tiwari, S. Numerical Investigations on Unsteady Flow past Two Identical Inline Square Cylinders Oscillating Transversely with Phase Difference [Volume 11, Issue 4, 2018, Pages 847-859]
  • Toumi, A. Modeling and Optimization of the Magnetohydrodynamic Conduction Pump by Particle Swarm Method [Volume 11, Issue 3, 2018, Pages 689-694]
  • Trivedi, C. Investigation of the Numerical Methodology of a Model Wind Turbine Simulation [Volume 11, Issue 3, 2018, Pages 527-544]
  • Tutak, M. Determination of the Zone with a Particularly High Risk of Endogenous Fires in the Goaves of a Longwall with Caving [Volume 11, Issue 3, 2018, Pages 545-553]

U

  • Uddin, E. Simulation of a Standard Store Separated from Generic Wing [Volume 11, Issue 6, 2018, Pages 1579-1589]

V

  • Vali, A. Experimental and Numerical Study of a Submarine and Propeller Behaviors in Submergence and Surface Conditions [Volume 11, Issue 5, 2018, Pages 1297-1308]
  • Valizadeh, R. Effect of Channel Boundary Conditions in Predicting Hydraulic Jump Characteristics using an ANFIS-Based Approach [Volume 11, Issue 3, 2018, Pages 555-565]
  • Vargas, R. O. Numerical Simulation of the Non-Isothermal Co-Extrusion Fiber Spinning with Flow-Induced Crystallization [Volume 11, Issue 5, 2018, Pages 1207-1215]
  • Vashi, Y. D. Ferrofluid Based Squeeze Film Lubrication between Rough Stepped Plates with Couple Stress Effect [Volume 11, Issue 3, 2018, Pages 597-612]
  • Vazquez, J. On the Determination of the Yield Surface within the Flow of Yield Stress Fluids using Computational Fluid Dynamics [Volume 11, Issue 4, 2018, Pages 971-982]
  • Velukumar, V. CFD and Statistical Approach for Optimization of Operating Parameters in a Tangential Cyclone Heat Exchanger [Volume 11, Issue 2, 2018, Pages 459-466]
  • Vigneshwaran, N. K. Analysis of Varying Geometri Structures of Fins using Radiators [Volume 11, (Special Issue), 2018, Pages 115-119]
  • Vijayan, V. Computational Analysis and Optimization of Spiral Plate Heat Exchanger [Volume 11, (Special Issue), 2018, Pages 121-128]
  • Vijayan, V. Potential Flow Simulation through Lagrangian Interpolation Meshless Method Coding [Volume 11, (Special Issue), 2018, Pages 129-134]
  • Villela, F. G. One-Dimensional Mathematical Model for Solar Drying of Beds of Sludge [Volume 11, Issue 5, 2018, Pages 1407-1419]
  • Visagavel, K. An Explicit Approach of Natural Ventilation for Various Orientation of Wind Catcher Openings using CFD [Volume 11, (Special Issue), 2018, Pages 103-105]
  • Viswanathan, A. Hardness and Thermal Analysis in Welded Butt Joint of Hybrid Aluminium (LM25) Metal Matrix Nano Composite Cylindrical Rod using TIG Welding Process [Volume 11, (Special Issue), 2018, Pages 79-89]
  • Vivek, C. M. Computational Analysis and Optimization of Spiral Plate Heat Exchanger [Volume 11, (Special Issue), 2018, Pages 121-128]

W

  • Wahba, E. Computational and Experimental Study on the Water-Jet Pump Performance [Volume 11, Issue 4, 2018, Pages 1013-1020]
  • Wang, B. Numerical Investigations into the Origin of Tip Unsteadiness in a Transonic Compressor [Volume 11, Issue 4, 2018, Pages 1133-1141]
  • Wang, D. Effect of Viscous Gas on Stability of the Electrified Liquid Sheet [Volume 11, Issue 5, 2018, Pages 1173-1183]
  • Wang, H. An Empirical Model Relating Pressure Drop and Mass Flow Rate in General Internal Flows: Theoretical Basis and Sensitivity Analysis [Volume 11, Issue 2, 2018, Pages 419-432]
  • Wang, L. L. Periodic Moving Track Analysis of Spiral Oil Wedge Journal Bearing under Dynamic Loading [Volume 11, Issue 5, 2018, Pages 1193-1199]
  • Wang, M. Periodic Moving Track Analysis of Spiral Oil Wedge Journal Bearing under Dynamic Loading [Volume 11, Issue 5, 2018, Pages 1193-1199]
  • Wang, Z. Numerical Study on the Smoke Flow Characterization and Phenomenon of Plug-Holing under Lateral Smoke Exhaust in Tunnel Fire [Volume 11, Issue 1, 2018, Pages 115-126]
  • Wang, Z. Investigation on Flow Characteristics of SVC Nozzles [Volume 11, Issue 2, 2018, Pages 331-342]
  • Wang, Z. Effect of Viscous Gas on Stability of the Electrified Liquid Sheet [Volume 11, Issue 5, 2018, Pages 1173-1183]
  • Wang, Z. CFD Investigation on the Application of Optimum Non-Axisymmetric Endwall Profiling for a Vaned Diffuse [Volume 11, Issue 6, 2018, Pages 1703-1715]
  • Wee, S. K. Experimental Study on the Effects of Water-in-oil Emulsions to Wall Shear Stress in the Pipeline Flow [Volume 11, Issue 5, 2018, Pages 1309-1319]
  • Wei, X. G. Swirl Characteristics of Vortex Valve Variable-Thrust Solid Rocket Motor [Volume 11, Issue 1, 2018, Pages 205-215]
  • Wertel, J. On the Determination of the Yield Surface within the Flow of Yield Stress Fluids using Computational Fluid Dynamics [Volume 11, Issue 4, 2018, Pages 971-982]
  • Whalley, M. Expansion Wave Propagation into a Cavity [Volume 11, Issue 2, 2018, Pages 507-517]
  • Wiercioch, P. A Simple Method for the Estimation of the Axial Dispersion Coefficient in Gas Flow [Volume 11, Issue 4, 2018, Pages 965-970]
  • Wójcik, M. A Simple Method for the Estimation of the Axial Dispersion Coefficient in Gas Flow [Volume 11, Issue 4, 2018, Pages 965-970]
  • Wong, S. F. Experimental Study on the Effects of Water-in-oil Emulsions to Wall Shear Stress in the Pipeline Flow [Volume 11, Issue 5, 2018, Pages 1309-1319]
  • Wozniak, G. Large Scale Fluctuations in an Axisymmetric Sudden Pipe Expansion with Large Aspect Ratio [Volume 11, Issue 4, 2018, Pages 877-883]
  • Wozniak, G. Experimental Investigation of Spray Characteristics of Pre-filming Air-blast Atomizers [Volume 11, Issue 6, 2018, Pages 1455-1469]
  • Wu, H. An Experimental Study of the Flow Field and Air Distribution Strategy on a Flat Plate with Air Injection [Volume 11, Issue 6, 2018, Pages 1521-1529]
  • Wu, Y. Numerical Investigations into the Origin of Tip Unsteadiness in a Transonic Compressor [Volume 11, Issue 4, 2018, Pages 1133-1141]

X

  • Xiang, F. CFD Investigation on the Application of Optimum Non-Axisymmetric Endwall Profiling for a Vaned Diffuse [Volume 11, Issue 6, 2018, Pages 1703-1715]
  • Xiang, M. Numerical Investigation on Temperature and Flow Characteristics of a Tornado-Like Vortex by using Large-Eddy Simulation [Volume 11, Issue 3, 2018, Pages 585-595]
  • Xiang, M. Hydrodynamics Analysis on the High-Speed Surface Vehicle with Super-Cavitating Hydrofoils [Volume 11, Issue 4, 2018, Pages 1005-1012]
  • Xiao-lin, S. Investigation on Flow Characteristics of SVC Nozzles [Volume 11, Issue 2, 2018, Pages 331-342]
  • Xing, J. T. Low Reynolds Number Effect on Energy Extraction Performance of Semi-Passive Flapping Foil [Volume 11, Issue 6, 2018, Pages 1613-1627]
  • Xu, L. Rollover Mechanism Methodology of LNG Tank with Gas-Liquid Stratification Based on Curvelet Finite Element Method and Large Eddy Simulation Technology [Volume 11, Issue 3, 2018, Pages 779-786]
  • Xu, X. Coefficient Adaptation Method for the Zwart Model [Volume 11, Issue 6, 2018, Pages 1665-1678]
  • Xu, Y. Effects of Reinjection on Flow Field of Open Jet Automotive Wind Tunnel Test Section [Volume 11, Issue 1, 2018, Pages 43-53]
  • Xu, Y. A Data Exchange Algorithm for One Way Fluid-Structure Interaction Analysis and its Application on High-Speed Train Coupling Interface [Volume 11, Issue 2, 2018, Pages 519-526]

Y

  • Yadav, D. The Influence of Pulsating Throughflow on the Onset of Electro-Thermo-Convection in a Horizontal Porous Medium Saturated by a Dielectric Nanofluid [Volume 11, Issue 6, 2018, Pages 1679-1689]
  • Yalcin, H. Characterization of Disturbed Hemodynamics due to Stenosed Aortic Jets with a Lagrangian Coherent Structures Technique [Volume 11, Issue 2, 2018, Pages 375-384]
  • Yang, H. Micro-Vibration Analysis and Optimization of Aerostatic Bearing with Pocketed Orifice-Type Restrictor [Volume 11, Issue 4, 2018, Pages 1115-1124]
  • Yang, J. Numerical Study on the Smoke Flow Characterization and Phenomenon of Plug-Holing under Lateral Smoke Exhaust in Tunnel Fire [Volume 11, Issue 1, 2018, Pages 115-126]
  • Yang, Z. Effects of Reinjection on Flow Field of Open Jet Automotive Wind Tunnel Test Section [Volume 11, Issue 1, 2018, Pages 43-53]
  • Yao, Y. CFD Study on Jet Stirred Oxidation Pond of Absorption Tower in Power Plant [Volume 11, Issue 1, 2018, Pages 233-240]
  • Yin, Y. H. Micro-Vibration Analysis and Optimization of Aerostatic Bearing with Pocketed Orifice-Type Restrictor [Volume 11, Issue 4, 2018, Pages 1115-1124]
  • Yogesh, P. Performance and Emission Characteristics of Biodiesel-Butanol Blended Fuel in Lhr Engine [Volume 11, (Special Issue), 2018, Pages 1-5]
  • Yoon, W. Experimental and Theoretical Study on Spray Angles of Bi-Swirl Coaxial Injectors [Volume 11, Issue 5, 2018, Pages 1377-1386]
  • Yoon, Y. Flame Length Scaling of C2H4-Air Premixed Flames under Acoustic Forcing [Volume 11, Issue 3, 2018, Pages 647-654]
  • You, Y. Detached Eddy Investigation of Conical Cavity Flow at Mach 0.9 [Volume 11, Issue 1, 2018, Pages 165-176]
  • Yu, L. Geometrical Optimization of an Inducer with Respect to Rotating Cavitation Generated Radial Forces by using an Orthogonal Experiment [Volume 11, Issue 6, 2018, Pages 1591-1598]
  • Yu, Y. Flow Simulation of Various Riblet Shapes and a Uniform Model for Boundary Layer [Volume 11, Issue 3, 2018, Pages 755-764]
  • Yuan, F. Numerical and Experimental Study of Separation Control by Boundary Layer Aspiration in a Highly-Loaded Axial Compressor Cascade [Volume 11, Issue 2, 2018, Pages 433-446]

Z

  • Zacarías, A. Numerical Simulation of the Non-Isothermal Co-Extrusion Fiber Spinning with Flow-Induced Crystallization [Volume 11, Issue 5, 2018, Pages 1207-1215]
  • Zaheer, Q. Comparison of Flow Field Simulation of Liquid Ejector Pump using Standard K-ε and Embedded LES Turbulence Modelling Techniques [Volume 11, Issue 2, 2018, Pages 385-395]
  • Zaheer, Q. Simulation of a Standard Store Separated from Generic Wing [Volume 11, Issue 6, 2018, Pages 1579-1589]
  • Zaidi, A. A. Performance Enhancement of Centrifugal Compressor with Addition of Splitter Blade Close to Pressure Surface [Volume 11, Issue 4, 2018, Pages 919-928]
  • Zareen, H. Systematic Investigation of Thrust Production during Plunging Motion of the Airfoil [Volume 11, Issue 4, 2018, Pages 1073-1088]
  • Zarrinchang, P. Numerical Simulation of Turbulent Airflow and Micro-Particle Deposition in Upper Human Respiratory System [Volume 11, Issue 3, 2018, Pages 577-584]
  • Zeinali, M. The Effects of the Reynolds Number on the Hydrodynamics Characteristics of an AUV [Volume 11, Issue 2, 2018, Pages 343-352]
  • Zeng, Q. L. Periodic Moving Track Analysis of Spiral Oil Wedge Journal Bearing under Dynamic Loading [Volume 11, Issue 5, 2018, Pages 1193-1199]
  • Zenit, V. R. Effect of Separation Angle and Nozzle Radial Position on Mixing Time in Ladles with Two Nozzles [Volume 11, Issue 1, 2018, Pages 11-20]
  • Zgolli, R. 3D Analyze of the Cavitation Mechanism in Turbulent Flow using Partially-Average Navier Stokes Model around the Clark-y Hydrofoil [Volume 11, Issue 6, 2018, Pages 1637-1649]
  • Zhang, H. C. Geometrical Optimization of an Inducer with Respect to Rotating Cavitation Generated Radial Forces by using an Orthogonal Experiment [Volume 11, Issue 6, 2018, Pages 1591-1598]
  • Zhang, J. Detached Eddy Investigation of Conical Cavity Flow at Mach 0.9 [Volume 11, Issue 1, 2018, Pages 165-176]
  • Zhang, L. A Data Exchange Algorithm for One Way Fluid-Structure Interaction Analysis and its Application on High-Speed Train Coupling Interface [Volume 11, Issue 2, 2018, Pages 519-526]
  • Zhang, W. Hydrodynamics Analysis on the High-Speed Surface Vehicle with Super-Cavitating Hydrofoils [Volume 11, Issue 4, 2018, Pages 1005-1012]
  • Zhang, Y. Effect of Viscous Gas on Stability of the Electrified Liquid Sheet [Volume 11, Issue 5, 2018, Pages 1173-1183]
  • Zhang, Y. D. Rollover Mechanism Methodology of LNG Tank with Gas-Liquid Stratification Based on Curvelet Finite Element Method and Large Eddy Simulation Technology [Volume 11, Issue 3, 2018, Pages 779-786]
  • Zhao, B. Rollover Mechanism Methodology of LNG Tank with Gas-Liquid Stratification Based on Curvelet Finite Element Method and Large Eddy Simulation Technology [Volume 11, Issue 3, 2018, Pages 779-786]
  • Zhao, S. Hydrodynamics Analysis on the High-Speed Surface Vehicle with Super-Cavitating Hydrofoils [Volume 11, Issue 4, 2018, Pages 1005-1012]
  • Zhao, Y. Reduced-Order Modeling of Unsteady Hypersonic Aerodynamics in Multi-Dimensional Parametric Space [Volume 11, Issue 4, 2018, Pages 1033-1045]
  • Zhao, Z. Experimental and CFD Study of Internal Flow inside a Sessile Microdroplet undergoing Lateral Vibration [Volume 11, Issue 5, 2018, Pages 1247-1253]
  • Zhong, L. Effects of Reinjection on Flow Field of Open Jet Automotive Wind Tunnel Test Section [Volume 11, Issue 1, 2018, Pages 43-53]
  • Zhou, H. Hydrodynamics Analysis on the High-Speed Surface Vehicle with Super-Cavitating Hydrofoils [Volume 11, Issue 4, 2018, Pages 1005-1012]
  • Zhou, H. Coefficient Adaptation Method for the Zwart Model [Volume 11, Issue 6, 2018, Pages 1665-1678]
  • Zhou, H. Coefficient Adaptation Method for the Zwart Model [Volume 11, Issue 6, 2018, Pages 1665-1678]
  • Zhou, L. CFD Investigation on the Application of Optimum Non-Axisymmetric Endwall Profiling for a Vaned Diffuse [Volume 11, Issue 6, 2018, Pages 1703-1715]
  • Zhu, J. Y. Effect of Pitch Angle and Reynolds Number on Aerodynamic Characteristics of a Small Horizontal Axis Wind Rotor [Volume 11, Issue 3, 2018, Pages 613-620]
  • Zhu, T. Experimental and CFD Study of Internal Flow inside a Sessile Microdroplet undergoing Lateral Vibration [Volume 11, Issue 5, 2018, Pages 1247-1253]
  • Zhu, W. A Data Exchange Algorithm for One Way Fluid-Structure Interaction Analysis and its Application on High-Speed Train Coupling Interface [Volume 11, Issue 2, 2018, Pages 519-526]
  • Ziaei Rad, M. A Similarity Solution with Two-Equation Turbulence Model for Computation of Turbulent Film Condensation on a Vertical Surface [Volume 11, Issue 3, 2018, Pages 637-645]
  • Zidouni, F. Numerical Visualization of Plunging Water Jet using Volume of Fluid Model [Volume 11, Issue 1, 2018, Pages 95-105]
  • Zinoubi, J. Optimization of Convective Heat Transfer from Two Heating Generators into Horizontal Enclosure Including A Discrete Obstacle: A Lattice Boltzmann Comprehensive Investigation [Volume 11, Issue 5, 2018, Pages 1277-1286]
  • Zuo, Z. G. Geometrical Optimization of an Inducer with Respect to Rotating Cavitation Generated Radial Forces by using an Orthogonal Experiment [Volume 11, Issue 6, 2018, Pages 1591-1598]