Journal of Applied Fluid Mechanics

Volume & Issue: Volume 10, Issue 1, January 2017

Dynamic Stall Prediction of a Pitching Airfoil using an Adjusted Two-Equation URANS Turbulence Model

Pages 1-10

10.18869/acadpub.jafm.73.238.26391

G. Bangga; H. Sasongko

Maximum Pressure Evaluation during Expulsion of Entrapped Air from Pressurized Pipelines

Pages 11-20

10.18869/acadpub.jafm.73.238.26313

D. M. Bucur; G. Dunca; M. J. Cervantes

Experimental and Numerical Investigation of a Longfin Inshore Squid’s Flow Characteristics

Pages 21-30

10.18869/acadpub.jafm.73.238.26166

A. Bahadir Olcay; M. Tabatabaei Malazi; A. Okbaz; H. Heperkan; E. Fırat; V. Ozbolat; M. Gokhan Gokcen; B. Sahin

Acoustic Detection of Cavitation Inception

Pages 31-40

10.18869/acadpub.jafm.73.238.25638

M. A. Hosien; S. M. Selim

Effect of Reverting Channels on Heat Transfer Performance of Microchannels with Different Geometries

Pages 41-53

10.18869/acadpub.jafm.73.238.26331

M. Farzaneh; M. R. Tavakoli; M. R. Salimpour

A New Approach to Reduce Memory Consumption in Lattice Boltzmann Method on GPU

Pages 55-67

10.18869/acadpub.jafm.73.238.26431

M. Sheida; M. Taeibi-Rahni; V. Esfahanian

Numerical Study of Double Diffusive Convection in a Lid Driven Cavity with Linearly Salted Side Walls

Pages 69-79

10.18869/acadpub.jafm.73.238.26231

N. Reddy; K. Murugesan

Numerical Investigation of Temporal Variation of Density Flow and Parameters

Pages 81-94

10.18869/acadpub.jafm.73.238.25947

F. Üneş; N. Ağiralioğlu

Experimental Investigation on Supercavitating Flow over Parabolic Cavitators

Pages 95-102

10.18869/acadpub.jafm.73.238.26678

M. Moghimi; N. M. Nouri; E. Molavi

Flow Control of Transonic Airfoils using Optimum Suction and Injection Parameters

Pages 103-115

10.18869/acadpub.jafm.73.238.26201

Z. Seifollahi Moghadam; A. Jahangirian

Analysis of Interrupted Rectangular Microchannel Heat Sink with High Aspect Ratio

Pages 117-126

10.18869/acadpub.jafm.73.238.26366

H. Kamal; A. Dewan

Enhancement of Mixing Performance of Non-Newtonian Fluids using Curving and Grooving of Microchannels

Pages 127-141

10.18869/acadpub.jafm.73.238.26374

S. Baheri Islami; M. Khezerloo

Flow Characteristics of a Pipe Diffuser for Centrifugal Compressors

Pages 143-155

10.18869/acadpub.jafm.73.238.26476

Z. Sun; X. Zheng; Z. Linghu

Numerical Investigation of Optimization of Injection Angle Effects on Fluidic Thrust Vectoring

Pages 157-167

10.18869/acadpub.jafm.73.238.26519

F. Forghany; M. Taeibi-Rahni; A. Asadollahi-Ghohieh

Heat Transfer Enhancement in a Stagnant Dielectric Liquid by the Up and Down Motion of Conductive Particles Induced by Coulomb Forces

Pages 169-182

10.18869/acadpub.jafm.73.238.26556

G. Eslami; E. Esmaeilzadeh; P. García-Sánchez; A. Behzadmehr; S. Baheri

Cross Flow past Circular Cylinder with Waviness in Confining Walls near the Cylinder

Pages 183-197

10.18869/acadpub.jafm.73.238.26148

R. Deepakkumar; S. Jayavel; S. Tiwari

Scattering of Fexural Gravity Waves by a Two-Dimensional Thin Plate

Pages 199-208

10.18869/acadpub.jafm.73.238.25337

S. Banerjee; P. Maiti; D. Mondal

Experimental Investigation of Laminar Convection Heat Transfer of Al2O3-Ethylene Glycol-Water Nanofluid as a Coolant in a Car Radiator

Pages 209-219

10.18869/acadpub.jafm.73.238.25768

G. A. Sheikhzadeh; M. M. Fakhari; H. Khorasanizadeh

Prediction of Velocity-Dip-Position at the Central Section of Open Channels using Entropy Theory

Pages 221-229

10.18869/acadpub.jafm.73.238.26403

S. Kundu

Numerical Comparison of the Parameters Influencing the Turbulent Flow using a T-shaped Spur Dike in a 90° Bend

Pages 231-241

10.18869/acadpub.jafm.73.238.26175

M. Vaghefi; Y. Safarpoor; M. Akbari

A Computational Study of High-Speed Microdroplet Impact onto a Smooth Solid Surface

Pages 243-256

10.18869/acadpub.jafm.73.238.26440

J. Q. Feng

Numerical Study on the Effect of Single Shallow Circumferential Groove Casing Treatment on the Flow Field and the Stability of a Transonic Compressor

Pages 257-265

10.18869/acadpub.jafm.73.238.26480

M. Agha Seyed Mirzabozorg; M. Bazazzadeh; M. Hamzezade

Effect of Liquid Viscosity and Solid Inventory on Hydrodynamics in a Liquid - solid Circulating Fluidized Bed

Pages 267-274

10.18869/acadpub.jafm.73.238.26109

N. Gnanasundaram; A. Venugopal; G. Ullas; Y. Katragadda

Identification of Drag Force of the Underwater Vehicles

Pages 275-281

10.18869/acadpub.jafm.73.238.26162

Y. Jahangardy; R. Madoliat; N. M. Nouri

Effect of Geometry Modifications on the Vectoring Performance of a Controlled Jet

Pages 283-291

10.18869/acadpub.jafm.73.238.26335

M. N. Tomac

Heat Transfer Analysis of Flat Plate Subjected to Multi-Jet Air Impingement using Principal Component Analysis and Computational Technique

Pages 293-306

10.18869/acadpub.jafm.73.238.26337

P. Chandramohan; S. N. Murugesan; S. Arivazhagan

Free Surface Thin Film Flow of a Sisko’s Fluid over a Surface Topography

Pages 307-317

10.18869/acadpub.jafm.73.238.26727

R. A. Shah; P. Gaskell; S. Veremieiev

Two-Dimensional Transient Modeling of Energy and Mass Transfer in Porous Building Components using COMSOL Multiphysics

Pages 319-328

10.18869/acadpub.jafm.73.238.26484

M. Maliki; N. Laredj; K. Bendani; H. Missoum

Similarity Solution for a Cylindrical Shock Wave in a Self-gravitating, Rotating Axisymmetric Dusty Gas with Heat Conduction and Radiation Heat Flux

Pages 329-341

10.18869/acadpub.jafm.73.238.25679

R. Bajargaan; A. Patel

Experimental and Numerical Investigation of Drag Force at High Speed Diver Motion in Different Depths from Free Surface

Pages 343-352

10.18869/acadpub.jafm.73.238.25759

M. R. Sadeghizadeh; B. Saranjam; R. Kamali

Asymmetric Water Entry of Twin Wedges with Different Deadrises, Heel Angles, and Wedge Separations using Finite Element Based Finite Volume Method and VOF

Pages 353-368

10.18869/acadpub.jafm.73.238.26185

R. Shademani; P. Ghadimi

Analytical and Numerical Studies of a Steam Ejector on the Effect of Nozzle Exit Position and Suction Chamber Angle to Fluid Flow and System Performance

Pages 369-378

10.18869/acadpub.jafm.73.238.26027

A. S. Ramesh; S. Joseph Sekhar

A Novel Approach for Measurement of Peak Expiratory Velocity

Pages 379-387

10.18869/acadpub.jafm.73.238.25515

C. C. Wu; F. M. Yu

Mathematical Modeling of the Flow of Diesel-CNG Fuel Mixture in a Pipe under the Influence of a Magnetic Field

Pages 389-396

10.18869/acadpub.jafm.73.238.26293

H. A. Abdul Wahhab; A. R. A. Aziz; H. H. Al-Kayiem; M. S. Nasif

Force Generation Mechanisms by an Insect Wing in an Idealized Hovering Motion

Pages 397-411

10.18869/acadpub.jafm.73.238.25949

H. R. Hamdani; A. Aizaz; M. A. Naqvi

Three-Dimensional Axisymmetric Solidification of a Viscous Incompressible Flow in the Stagnation Point Region

Pages 413-420

10.18869/acadpub.jafm.73.238.26142

A. Shokrgozar Abbasi

A MLPG Meshless Method for Numerical Simulation of Unsteady Incompressible Flows

Pages 421-432

10.18869/acadpub.jafm.73.238.25895

I. Saeedpanah

Force Generation Mechanisms by an Insect Wing in Hovering Motion with Different Flipping Schedules

Pages 433-445

10.18869/acadpub.jafm.73.238.26152

H. R. Hamdani; A. Aizaz; M. A. Naqvi

Numerical Study of Unsteady Cavitating Flows around a Hydrofoil

Pages 447-458

10.18869/acadpub.jafm.73.238.26974

A. Bel Hadj Taher; H. Kanfoudi; M. Ennouri; R. Zgolli

Numerical Study on the Magnetohydrodynamics of a Liquid Metal Oscillatory Flow under Inductionless Approximation

Pages 459-477

10.18869/acadpub.jafm.73.238.25866

J. A. Rizzo-Sierra

Journal Archive

Volume 18 (2025)

Volume 17 (2024)

Volume 16 (2023)

Volume 15 (2022)

Volume 14 (2021)

Volume 13 (2020)

Volume 12 (2019)

Volume 11 (2018)

Volume 10 (2017)

Volume 9 (2016)

Volume 8 (2015)

Volume 7 (2014)

Volume 6 (2013)

Volume 5 (2012)

Volume 4 (2011)

Volume 3 (2010)

Volume 2 (2009)

Volume 1 (2008)